T3.
Timer to disconnect the link if no flags are received. Specified
in 0.1 second units.
Applicable: X25 controller types with XIO subtype
Parsed from file Mega0025.MIB.txt
Company: None
Module: SAT-MEGA-MIB
T3.
Timer to disconnect the link if no flags are received. Specified
in 0.1 second units.
Applicable: X25 controller types with XIO subtype
Parsed from file SAT-MEGA-MIB.mib
Module: SAT-MEGA-MIB
Vendor: SAGEM
Module: SAT-MEGA-MIB
[Automatically extracted from oidview.com]
ctrlParamTimerT3 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "T3. Timer to disconnect the link if no flags are received. Specified in 0.1 second units. Applicable: X25 controller types with XIO subtype" ::= { ctrlParamEntry 67 }
ctrlParamTimerT3 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "T3. Timer to disconnect the link if no flags are received. Specified in 0.1 second units. Applicable: X25 controller types with XIO subtype" ::= { ctrlParamEntry 67 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1038.4.3.4.1.1 | ctrlParamIndex | 0 | 0 | Index The position of this controller in relation to 'BASE'. i.e. BASE = 0 NMSC = 1 PS01 = 2 ... Applicable: All controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.2 | ctrlParamName | 0 | 0 | Name. The unique 4 character name by which this controller is known. Applicable: All controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.3 | ctrlParamType | 0 | 0 | Type. The type of controller this is. Applicable: All controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.4 | ctrlParamSubType | 0 | 0 | Sub-Type. The link between the controller and its associated hardware type. Applicable: X25, SDLC, QLLC, HDLC and NULL controller … |
| 1.3.6.1.4.1.1038.4.3.4.1.5 | ctrlParamNoChannels | 0 | 0 | Number of channels. The number of logical channels configured on the controller. Applicable: All controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.6 | ctrlParamSpeed | 0 | 0 | Speed. The clock speed of the interface. Applicable: X25, SDLC, QLLC, HDLC and NULL controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.7 | ctrlParamInterfaceType | 0 | 0 | The serial interface type. Note, Only applicable to MegaCard Applicable: XFRM, NFRM, PPP, X25, HDLC controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.8 | ctrlParamPacketSize | 0 | 0 | Packet Size. The maximum packet size in bytes of outgoing packets, this parameter must be less than or equal to the 'BASE' statist… |
| 1.3.6.1.4.1.1038.4.3.4.1.9 | ctrlParamV54Modem | 0 | 0 | V54 Modem. Enable V54 loop back testing. Note this does not initiate loop back testing, the loop back is initiated by typing in th… |
| 1.3.6.1.4.1.1038.4.3.4.1.10 | ctrlParamAddress | 0 | 0 | Address. The logical address designation of the controller. Applicable: X25, HDLC and NULL controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.11 | ctrlParamOptions | 0 | 0 | Options. A range of controller options, options may be specified individually or added together. Note, that the values returned by… |
| 1.3.6.1.4.1.1038.4.3.4.1.12 | ctrlParamInitFrame | 0 | 0 | Initial Frame. Applicable: X25, HDLC, CONS, ILAN, XLAN, DLC and NULL controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.13 | ctrlParamT1 | 0 | 0 | T1. Timer for retransmission of unacknowleged frames. Specified in 0.1 second units. Applicable: X25, HDLC, CONS, ILAN, XLAN, DLC … |
| 1.3.6.1.4.1.1038.4.3.4.1.14 | ctrlParamTries | 0 | 0 | Tries. The number of times a frame will be retransmitted before a link restart is initiated. Applicable: X25, SDLC, QLLC, HDLC, CO… |
| 1.3.6.1.4.1.1038.4.3.4.1.15 | ctrlParamKLevel2 | 0 | 0 | KLevel 2. The level 2 window size. Applicable: X25, HDLC, CONS, ILAN, XLAN, DLC and NULL controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.16 | ctrlParamKLevel3 | 0 | 0 | KLevel 3. The level 3 window size. Applicable: X25, HDLC, CONS, ILAN, XLAN, DLC and NULL controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.17 | ctrlParamLineGroup | 0 | 0 | Line Group. The line group is used for load sharing. If two links have same (non-zero) line group then data may be shared between … |
| 1.3.6.1.4.1.1038.4.3.4.1.18 | ctrlParamLCGN | 0 | 0 | LCGN. The logical channel group number for this link. Applicable: X25, HDLC, CONS, ILAN, XLAN, DLC and NULL controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.19 | ctrlParamLCNOffset | 0 | 0 | LCN Offset. This parameter is used in conjunction with the LCGN. It's purpose is to shift the channel range by the appropriate off… |
| 1.3.6.1.4.1.1038.4.3.4.1.20 | ctrlParamAddressGroup | 0 | 0 | Address Group. This parameter is used in conjunction with the address group field in the x25 file to provide different addressing… |
| 1.3.6.1.4.1.1038.4.3.4.1.21 | ctrlParamFrameSequence | 0 | 0 | Frame Sequence. This parameter determines if normal or extended frame sequencing is supported. Applicable: X25, SDLC, QLLC, HDLC, … |
| 1.3.6.1.4.1.1038.4.3.4.1.22 | ctrlParamCallTimeOut | 0 | 0 | Call Time Out. The time in seconds the MegaPAC will wait to receive a call accept packet before clearing the call. Applicable: X25… |
| 1.3.6.1.4.1.1038.4.3.4.1.23 | ctrlParamErrorThreshold | 0 | 0 | Error Threshold. The number of CRC errors that will be accepted before generating an error report. Applicable: X25, HDLC, CONS, IL… |
| 1.3.6.1.4.1.1038.4.3.4.1.24 | ctrlParamLoopBarPriority | 0 | 0 | Loop Bar Priority. Prevents calls from looping on the same controller. Applicable: X25, HDLC, CONS, XLAN, DLC and NULL controller … |
| 1.3.6.1.4.1.1038.4.3.4.1.25 | ctrlParamExtendedCallMgmt | 0 | 0 | Extended Call Management. Invokes extended packet processing facilities via the MAC file. For PPP, IN and OUT have special meaning… |
| 1.3.6.1.4.1.1038.4.3.4.1.26 | ctrlParamOptionalTimers | 0 | 0 | Optional Timers. Optional level 3 timers for clearing calls when a clear confirmation has not been received after a clear request… |
| 1.3.6.1.4.1.1038.4.3.4.1.27 | ctrlParamOptionalFlags | 0 | 0 | Optional Flags. This parameter is used to insert extra flags between frames to slow down the rate of transmission. It will only t… |
| 1.3.6.1.4.1.1038.4.3.4.1.28 | ctrlParamTransportLevelType | 0 | 0 | Transport Level Type. Enable the ISO transport facility. Applicable: X25, HDLC, CONS, XLAN, DLC and NULL controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.29 | ctrlParamTransportClass | 0 | 0 | Transport Class. The type of transport class implemented. Applicable: X25, HDLC, CONS, XLAN, DLC and NULL controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.30 | ctrlParamDefaultWindowSize | 0 | 0 | Default Window Size. The initial credit limit to be used on a transport session. Applicable: X25, HDLC, CONS, XLAN, DLC and NULL co… |
| 1.3.6.1.4.1.1038.4.3.4.1.31 | ctrlParamDisableFlowControl | 0 | 0 | Disable Flow Control. Enable/disable flow control on a transport class 2 call. Applicable: X25, HDLC, CONS, XLAN, DLC and NULL con… |
| 1.3.6.1.4.1.1038.4.3.4.1.32 | ctrlParamTSAPFormat | 0 | 0 | TSAP Format. Determines how the TSAP's will be treated internally by the MegaPAC. If set to text the local and remote TSAP's will… |
| 1.3.6.1.4.1.1038.4.3.4.1.33 | ctrlParamMaximumTPDUSize | 0 | 0 | Max. TPDU Size. The maximum Transport Protocol Data Unit Size. Applicable: X25, HDLC, CONS, ILAN, XLAN and NULL controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.34 | ctrlParamTTRTime | 0 | 0 | TTR Timer. Time To Resynchronise. Specifies the time delay in seconds for the transport class three timer to resync at the initia… |
| 1.3.6.1.4.1.1038.4.3.4.1.35 | ctrlParamTWRTime | 0 | 0 | TWR Timer. Time to Wait for Resynchronisation. The time delay in seconds allowed for the transport class 3 timer at the respondin… |
| 1.3.6.1.4.1.1038.4.3.4.1.36 | ctrlParamDestinationAddress | 0 | 0 | Destination Address. The physical address of the target device. Applicable: CONS, ILAN, DLC and XLAN controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.37 | ctrlParamDSAP | 0 | 0 | DSAP. The Destination Service Access Point. Applicable: CONS, ILAN, DLC and XLAN controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.38 | ctrlParamSSAP | 0 | 0 | SSAP. The Source Service Access Point. Applicable: CONS, ILAN, DLC and XLAN controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.39 | ctrlParamSDLCOptions | 0 | 0 | SDLC Options. A range of link level options used for establishing IBM connections. Applicable: SDLC and QLLC controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.40 | ctrlParamPrimaryStation | 0 | 0 | Primary Station. This parameter determines whether the MegaPAC will operate as a HOST primary connection (yes) or a CLUSTER secon… |
| 1.3.6.1.4.1.1038.4.3.4.1.41 | ctrlParamIdleDetectTime | 0 | 0 | Idle Detect Timer. This parameter determines the time period in tenths of a second before an unacknowleged POLL/RESPONSE frame wil… |
| 1.3.6.1.4.1.1038.4.3.4.1.42 | ctrlParamPollInterval | 0 | 0 | Poll Interval. The time period in tenths of a second between sending POLL frames. Applicable: SDLC, QLLC, MAP and MULT controller … |
| 1.3.6.1.4.1.1038.4.3.4.1.43 | ctrlParamDuplex | 0 | 0 | Duplex. Enables SDLC full duplex operation, half duplex operation is reserved for future use. Applicable: SDLC and QLLC controller… |
| 1.3.6.1.4.1.1038.4.3.4.1.44 | ctrlParamTransmitDelay | 0 | 0 | Transmit Delay. Determines the time period in tenths of a second between the MegaPAC receiving an RR frame with the P-Bit set and… |
| 1.3.6.1.4.1.1038.4.3.4.1.45 | ctrlParamSlowPollTimer | 0 | 0 | Slow Poll Timer. When the controller has been defined as a primary station a slow poll rate can be specified for polling a Cluste… |
| 1.3.6.1.4.1.1038.4.3.4.1.46 | ctrlParamMaxCallInterval | 0 | 0 | Max. Call Interval. When controller is configured as a primary station, a call request retry interval may be defined, so as to av… |
| 1.3.6.1.4.1.1038.4.3.4.1.47 | ctrlParamMaxCallCycles | 0 | 0 | Max. Call Cycles. This parameter is used in conjunction with the Maximum Call Interval parameter. It specifies the maximum number… |
| 1.3.6.1.4.1.1038.4.3.4.1.48 | ctrlParamGroupPoll | 0 | 0 | Group Poll. Used in SNA applications, where the specified value would generate multiple down-stream poll requests. Applicable: QLL… |
| 1.3.6.1.4.1.1038.4.3.4.1.49 | ctrlParamDelayToRTSLow | 0 | 0 | Delay RTS Low. Specifies the number of padding characters to be inserted between the end of data transmission and the dropping of… |
| 1.3.6.1.4.1.1038.4.3.4.1.50 | ctrlParamDelayToCTSHigh | 0 | 0 | Delay CTS High. Specifies the number of padding characters to be inserted between the dropping of RTS and the raising of CTS. Onl… |
| 1.3.6.1.4.1.1038.4.3.4.1.51 | ctrlParamInputSyncDeletion | 0 | 0 | Input Sync Deletion. If set, all SYNC characters will be stripped prior to transmission. Only effective in synchronous full duple… |
| 1.3.6.1.4.1.1038.4.3.4.1.52 | ctrlParamOutputSyncInsertion | 0 | 0 | Output Sync Insertion. Specifies the number of SYNC characters to be transmitted prior to the start of the data block. Only effec… |
| 1.3.6.1.4.1.1038.4.3.4.1.53 | ctrlParamDCDFilter | 0 | 0 | DCD Filter. A filter delay specified in tenths of a second which prevents unwanted link restarts caused by toggling of DCD signal.… |
| 1.3.6.1.4.1.1038.4.3.4.1.54 | ctrlParamInhibitTimeFill | 0 | 0 | Inhibit Time Fill Allows the insertion of time fill frames to compensate for network delays. Effective in synchronous mode only. A… |
| 1.3.6.1.4.1.1038.4.3.4.1.55 | ctrlParamDirectedBroadcasts | 0 | 0 | Directed Broadcasts. ???. Applicable: LAN and TLAN Controllers only |
| 1.3.6.1.4.1.1038.4.3.4.1.56 | ctrlParamDefaultLocalPrinter | 0 | 0 | Default Local Printer. The number of the channel which is reserved for a Screen Print server, a value of (0) disables the Screen … |
| 1.3.6.1.4.1.1038.4.3.4.1.57 | ctrlParamNewLANInterface | 0 | 0 | New NFRM Port. The controller marks the first position of a controller connection to a LAN interface. All other controllers define… |
| 1.3.6.1.4.1.1038.4.3.4.1.58 | ctrlParamNewSerialInterface | 0 | 0 | New NFRM Port. The controller marks the first position of a controller connection to a serial interface. All other controllers def… |
| 1.3.6.1.4.1.1038.4.3.4.1.59 | ctrlParamDlci | 0 | 0 | DLCI Number |
| 1.3.6.1.4.1.1038.4.3.4.1.60 | ctrlParamMode | 0 | 0 | Status of DLCI. Defines a Network to Network Interfaces (NNI) or User Network Interface (UNI) implentation. Where MegaPAC connects… |
| 1.3.6.1.4.1.1038.4.3.4.1.61 | ctrlParamLmi | 0 | 0 | Type of Local Management Interface (LMI). Ansi = ANSI LMI yes = T1.S1 LMI no = LMI disabled. |
| 1.3.6.1.4.1.1038.4.3.4.1.62 | ctrlParamKeepAliveTimer | 0 | 0 | Only applicable if the LMI is active. Specifies in seconds the interval between keep alive messages. If this end is a DTE, this i… |
| 1.3.6.1.4.1.1038.4.3.4.1.63 | ctrlParamFullStatusInterval | 0 | 0 | Full status enquiry timer (number of times of T391/T392) Specifies how often a DTE sends a or a DCE expects a Full Status Request… |
| 1.3.6.1.4.1.1038.4.3.4.1.64 | ctrlParamBandwidth | 0 | 0 | Rhe sample period used in enforcing the committed information rate (CIR). The CIR expressed in terms of characters per 1/10 th se… |
| 1.3.6.1.4.1.1038.4.3.4.1.65 | ctrlParamBurstCommit | 0 | 0 | Burst Commit, i.e the number of characters the remote end is committed to buffering, in our case in a 1/10 th of a second period |
| 1.3.6.1.4.1.1038.4.3.4.1.66 | ctrlParamBurstEligibility | 0 | 0 | Burst Eligibility, i.e the DLCI in questions is enabled to transmit a burst beyond its committed information rate, when enabled t… |
| 1.3.6.1.4.1.1038.4.3.4.1.68 | ctrlParamFlowControl | 0 | 0 | Enables MULT flow control. On MULT controller type flow control inhibits data on all ressources when a single ressource requires … |
| 1.3.6.1.4.1.1038.4.3.4.1.69 | ctrlParamConfigState | 0 | 0 | Command to set the state of the controller. Set this parameter to 1 to restart the controller. Set this parameter to 2 to stop th… |
| 1.3.6.1.4.1.1038.4.3.4.1.70 | ctrlParamTry | 0 | 0 | This value used to detect whether connection to the other end has been lost. The number specified is the ratio between Status Req… |