The OSPF Interface Entry describes one interface from
the viewpoint of OSPF.
Parsed from file hp-sn-ospf.mib.txt
Company: None
Module: HP-SN-OSPF-GROUP-MIB
The OSPF Interface Entry describes one interface from
the viewpoint of OSPF.
Parsed from file HP-SN-OSPF-GROUP-MIB.mib
Module: HP-SN-OSPF-GROUP-MIB
Vendor: Hewlett-Packard
Module: HP-SN-OSPF-GROUP-MIB
[Automatically extracted from oidview.com]
snOspfIfStatusEntry OBJECT-TYPE SYNTAX SnOspfIfStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OSPF Interface Entry describes one interface from the viewpoint of OSPF." INDEX { snOspfIfStatusEntryIndex } ::= { snOspfIfStatusTable 1 }
snOspfIfStatusEntry OBJECT-TYPE SYNTAX SnOspfIfStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OSPF Interface Entry describes one interface from the viewpoint of OSPF." INDEX { snOspfIfStatusEntryIndex } ::= { snOspfIfStatusTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.1 | snOspfIfStatusEntryIndex | 0 | 0 | The table entry index of this Area. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.2 | snOspfIfStatusPort | 0 | 0 | The physical router port of this OSPF interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.3 | snOspfIfStatusIpAddress | 0 | 0 | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.4 | snOspfIfStatusAreaId | 0 | 0 | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.5 | snOspfIfStatusType | 0 | 0 | The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs,… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.6 | snOspfIfStatusAdminStat | 0 | 0 | The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interfa… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.7 | snOspfIfStatusRtrPriority | 0 | 0 | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.8 | snOspfIfStatusTransitDelay | 0 | 0 | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.9 | snOspfIfStatusRetransInterval | 0 | 0 | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.10 | snOspfIfStatusHelloInterval | 0 | 0 | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same fo… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.11 | snOspfIfStatusRtrDeadInterval | 0 | 0 | The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This shoul… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.12 | snOspfIfStatusState | 0 | 0 | The OSPF Interface State. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.13 | snOspfIfStatusDesignatedRouter | 0 | 0 | The IP Address of the Designated Router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.14 | snOspfIfStatusBackupDesignatedRouter | 0 | 0 | The IP Address of the Backup Designated Router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.15 | snOspfIfStatusEvents | 0 | 0 | The number of times this OSPF interface has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.16 | snOspfIfStatusAuthType | 0 | 0 | snOspfIfStatusAuthtype |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.17 | snOspfIfStatusAuthKey | 0 | 0 | The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the age… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.18 | snOspfIfStatusMetricValue | 0 | 0 | The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.19 | snOspfIfStatusMd5AuthKeyId | 0 | 0 | The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIfMd5AuthKeyId must be (1 to 255). … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.20 | snOspfIfStatusMd5AuthKey | 0 | 0 | The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent wil… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.21 | snOspfIfStatusMd5ActivationWaitTime | 0 | 0 | The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.22 | snOspfIfStatusAreaIdFormat | 0 | 0 | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integ… |