The OSPF interface type.
By way of a default, this field may be intuited from
the corresponding value of ifType. Broadcast LANs,
such as Ethernet and IEEE 802.5, take the value
'broadcast', X.25, Frame Relay, and similar
technologies take the value 'nbma', and links that are
definitively point to point take the value
'pointToPoint'.
Parsed from file hp-sn-ospf.mib.txt
Company: None
Module: HP-SN-OSPF-GROUP-MIB
The OSPF interface type.
By way of a default, this field may be intuited from
the corresponding value of ifType. Broadcast LANs,
such as Ethernet and IEEE 802.5, take the value
'broadcast', X.25, Frame Relay, and similar
technologies take the value 'nbma', and links that are
definitively point to point take the value
'pointToPoint'.
Parsed from file HP-SN-OSPF-GROUP-MIB.mib
Module: HP-SN-OSPF-GROUP-MIB
Vendor: Hewlett-Packard
Module: HP-SN-OSPF-GROUP-MIB
[Automatically extracted from oidview.com]
snOspfIfStatusType OBJECT-TYPE SYNTAX INTEGER { broadcast (1), nbma (2), pointToPoint (3) } ACCESS read-only STATUS mandatory DESCRIPTION "The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25, Frame Relay, and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'." ::= { snOspfIfStatusEntry 5 }
snOspfIfStatusType OBJECT-TYPE SYNTAX INTEGER { broadcast (1), nbma (2), pointToPoint (3) } ACCESS read-only STATUS mandatory DESCRIPTION "The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25, Frame Relay, and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'." ::= { snOspfIfStatusEntry 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.1 | snOspfIfStatusEntryIndex | 0 | 0 | The table entry index of this Area. |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.2 | snOspfIfStatusPort | 0 | 0 | The physical router port of this OSPF interface. |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.3 | snOspfIfStatusIpAddress | 0 | 0 | The IP address of this OSPF interface. |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.4 | snOspfIfStatusAreaId | 0 | 0 | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.6 | snOspfIfStatusAdminStat | 0 | 0 | The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interfa… |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.7 | snOspfIfStatusRtrPriority | 0 | 0 | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. … |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.8 | snOspfIfStatusTransitDelay | 0 | 0 | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.9 | snOspfIfStatusRetransInterval | 0 | 0 | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value … |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.10 | snOspfIfStatusHelloInterval | 0 | 0 | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same fo… |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.11 | snOspfIfStatusRtrDeadInterval | 0 | 0 | The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This shoul… |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.12 | snOspfIfStatusState | 0 | 0 | The OSPF Interface State. |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.13 | snOspfIfStatusDesignatedRouter | 0 | 0 | The IP Address of the Designated Router. |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.14 | snOspfIfStatusBackupDesignatedRouter | 0 | 0 | The IP Address of the Backup Designated Router. |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.15 | snOspfIfStatusEvents | 0 | 0 | The number of times this OSPF interface has changed its state, or an error has occurred. |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.16 | snOspfIfStatusAuthType | 0 | 0 | snOspfIfStatusAuthtype |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.17 | snOspfIfStatusAuthKey | 0 | 0 | The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the age… |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.18 | snOspfIfStatusMetricValue | 0 | 0 | The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.19 | snOspfIfStatusMd5AuthKeyId | 0 | 0 | The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIfMd5AuthKeyId must be (1 to 255). … |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.20 | snOspfIfStatusMd5AuthKey | 0 | 0 | The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent wil… |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.21 | snOspfIfStatusMd5ActivationWaitTime | 0 | 0 | The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.22 | snOspfIfStatusAreaIdFormat | 0 | 0 | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integ… |