Vendor: Hewlett-Packard
Module: BLADETYPE4-NETWORK-MIB
[Automatically extracted from oidview.com]
agSystem OBJECT IDENTIFIER ::= { agentConfig 1 }
agSystem OBJECT IDENTIFIER ::= { agentConfig 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.2 | agApplyConfiguration | 0 | 0 | This is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the cha… |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.3 | agSavePending | 0 | 0 | This object, when read, gives the user information whether an save action is needed and that the configuration has been applied b… |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.4 | agSaveConfiguration | 0 | 0 | This is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active confi… |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.5 | agRevert | 0 | 0 | This is an action object to revert the unapplied changes made to the switch. By setting the value to revert(2), all the unapplied… |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.6 | agRevertApply | 0 | 0 | This is an action object to revert the unsaved changes made to the switch. By setting the value to revertApply(2), all the unsave… |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.7 | agReset | 0 | 0 | This is an action object to reboot the switch. other(1) is returned always when read. The following values are writable: coldReset… |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.8 | agConfigForNxtReset | 0 | 0 | The configuration information to be loaded from at next reset. The following values are writable: active(2)...active configuratio… |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.9 | agImageForNxtReset | 0 | 0 | The software image to be booted from at next reset. The following values are writable: image1(2)...image 1 image2(3)...image 2 |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.10 | agSoftwareVersion | 0 | 0 | The version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A ze… |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.11 | agBootVer | 0 | 0 | The version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.12 | agImage1Ver | 0 | 0 | The version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is return… |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.13 | agImage2Ver | 0 | 0 | The version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is return… |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.14 | agRtcDate | 0 | 0 | The date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.15 | agRtcTime | 0 | 0 | The time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if time is not available. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.16 | agLastSetErrorReason | 0 | 0 | The error reason of the last SET failure. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.17 | agCurCfgHttpServerPort | 0 | 0 | The TCP port number that the HTTP server is listening to in the current_configuration block. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.18 | agNewCfgHttpServerPort | 0 | 0 | The TCP port number that the HTTP server is listening to in the new_configuration block. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.19 | agCurCfgLoginBanner | 0 | 0 | The user defined login banner. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.20 | agNewCfgLoginBanner | 0 | 0 | The user defined login banner. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.23 | agCurCfgConsole | 0 | 0 | Enable or disable console output of syslog messages. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.24 | agNewCfgConsole | 0 | 0 | Enable or disable console output of syslog messages. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.29 | agCurCfgBootp | 0 | 0 | Enable or disable the use of BootP, as currently configured in the current_configuration block. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.30 | agNewCfgBootp | 0 | 0 | Enable or disable the use of BootP, in the new_configuration block. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.31 | agSlotNumber | 0 | 0 | Identifies the slot in which this switch is installed. If the agent implementing this MIB is not a blade in a chassis this value … |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.32 | agCurCfgSnmpTimeout | 0 | 0 | Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by … |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.33 | agNewCfgSnmpTimeout | 0 | 0 | Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by … |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.34 | agCurCfgTelnetServerPort | 0 | 0 | The TCP port number that the telnet server listens for telnet sessions. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.35 | agNewCfgTelnetServerPort | 0 | 0 | The TCP port number that the telnet server listens for telnet sessions. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.36 | agClearFlashDump | 0 | 0 | This is an action object to clear the FLASH dump. ok(1) is returned when this object is read. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.37 | agRackId | 0 | 0 | The rack unique identifier. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.38 | agChassis | 0 | 0 | Chassis serial number. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.39 | agCurCfgTftpServerPort | 0 | 0 | The TCP port number that the TFTP server is listening to in the current_configuration block. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.40 | agNewCfgTftpServerPort | 0 | 0 | The TCP port number that the TFTP server is listening to in the new_configuration block. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.49 | agCurCfgHttpsServerPort | 0 | 0 | The TCP port number that the HTTPS server is listening to in the current_configuration block. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.50 | agNewCfgHttpsServerPort | 0 | 0 | The TCP port number that the HTTPS server is listening to in the new_configuration block. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.51 | agCurDaylightSavings | 0 | 0 | The daylight savings location. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.52 | agNewDaylightSavings | 0 | 0 | The daylight savings location. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.53 | agCfgSysDlight | 0 | 0 | Enable/disable daylight savings time. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.55 | agCurCfgIdleCLITimeout | 0 | 0 | Set idle CLI sessions timeout. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.56 | agNewCfgIdleCLITimeout | 0 | 0 | Set idle CLI sessions timeout. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.57 | agCurCfgUfdTrap | 0 | 0 | The current status of the UFDFO SNMP trap. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.58 | agNewCfgUfdTrap | 0 | 0 | Enable or disable sending UFDFO SNMP trap. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.59 | agCurCfgReminders | 0 | 0 | Current status of reminders feature. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.60 | agNewCfgReminders | 0 | 0 | Enable or disable reminders feature. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.66 | agCurBootNxtCliMode | 0 | 0 | Current boot mode. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.67 | agNewBootNxtCliMode | 0 | 0 | Next cli boot mode. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.70 | agCurCfgDhcp | 0 | 0 | Enable or disable the use of DHCP, as currently configured in the current_configuration block. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.71 | agNewCfgDhcp | 0 | 0 | Enable or disable the use of DHCP, in the new_configuration block. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.72 | agCfgL3Status | 0 | 0 | The current status of L3 feature. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.73 | agCurCfgHprompt | 0 | 0 | Current status of hprompt. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.75 | agNewCfgHprompt | 0 | 0 | New status of hpprompt. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.76 | agCurCfgLoginNotice | 0 | 0 | The user defined login notice. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.77 | agNewCfgLoginNotice | 0 | 0 | The user defined login notice. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.78 | agCurBootNxtCliModePrompt | 0 | 0 | Current status of selectable CLI mode prompt. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.79 | agNewBootNxtCliModePrompt | 0 | 0 | Next status of selectable CLI mode prompt. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.82 | agCurCfgOldDst | 0 | 0 | Enable or disable system DST for US. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.83 | agNewCfgOldDst | 0 | 0 | Enable or disable system DST for US. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.84 | agHavePanicDump | 0 | 0 | This object, when read, gives the user the information whether a panic dump exist in flash. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2 | agPortConfig | 3 | 47 | None |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3 | agRadiusConfig | 20 | 20 | None |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4 | agNTP | 8 | 8 | None |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5 | agSyslog | 16 | 53 | None |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7 | agTransfer | 11 | 11 | None |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8 | agApply | 4 | 7 | None |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10 | agTacacsConfig | 28 | 34 | None |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11 | agMgmtNetConfig | 4 | 13 | None |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12 | agAccess | 3 | 16 | None |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13 | agSSHConfig | 12 | 12 | None |