This is an action object to revert the unsaved changes
made to the switch. By setting the value to revertApply(2),
all the unsaved as well as unapplied changes will be
reverted.
other(1) is returned when this object is read.
Parsed from file gbe2c-l2l3.mib.txt
Company: None
Module: BLADETYPE4-NETWORK-MIB
This is an action object to revert the unsaved changes
made to the switch. By setting the value to revertApply(2),
all the unsaved as well as unapplied changes will be
reverted.
other(1) is returned when this object is read.
Parsed from file BLADETYPE4-NETWORK-MIB.mib
Module: BLADETYPE4-NETWORK-MIB
Vendor: Hewlett-Packard
Module: BLADETYPE4-NETWORK-MIB
[Automatically extracted from oidview.com]
agRevertApply OBJECT-TYPE SYNTAX INTEGER { other(1), revertApply(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object to revert the unsaved changes made to the switch. By setting the value to revertApply(2), all the unsaved as well as unapplied changes will be reverted. other(1) is returned when this object is read. " ::= { agSystem 6 }
agRevertApply OBJECT-TYPE SYNTAX INTEGER { other(1), revertApply(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object to revert the unsaved changes made to the switch. By setting the value to revertApply(2), all the unsaved as well as unapplied changes will be reverted. other(1) is returned when this object is read. " ::= { agSystem 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.2 | agApplyConfiguration | 0 | 0 | This is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the cha… |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.3 | agSavePending | 0 | 0 | This object, when read, gives the user information whether an save action is needed and that the configuration has been applied b… |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.4 | agSaveConfiguration | 0 | 0 | This is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active confi… |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.5 | agRevert | 0 | 0 | This is an action object to revert the unapplied changes made to the switch. By setting the value to revert(2), all the unapplied… |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.7 | agReset | 0 | 0 | This is an action object to reboot the switch. other(1) is returned always when read. The following values are writable: coldReset… |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.8 | agConfigForNxtReset | 0 | 0 | The configuration information to be loaded from at next reset. The following values are writable: active(2)...active configuratio… |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.9 | agImageForNxtReset | 0 | 0 | The software image to be booted from at next reset. The following values are writable: image1(2)...image 1 image2(3)...image 2 |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.10 | agSoftwareVersion | 0 | 0 | The version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A ze… |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.11 | agBootVer | 0 | 0 | The version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.12 | agImage1Ver | 0 | 0 | The version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is return… |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.13 | agImage2Ver | 0 | 0 | The version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is return… |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.14 | agRtcDate | 0 | 0 | The date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.15 | agRtcTime | 0 | 0 | The time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if time is not available. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.16 | agLastSetErrorReason | 0 | 0 | The error reason of the last SET failure. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.17 | agCurCfgHttpServerPort | 0 | 0 | The TCP port number that the HTTP server is listening to in the current_configuration block. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.18 | agNewCfgHttpServerPort | 0 | 0 | The TCP port number that the HTTP server is listening to in the new_configuration block. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.19 | agCurCfgLoginBanner | 0 | 0 | The user defined login banner. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.20 | agNewCfgLoginBanner | 0 | 0 | The user defined login banner. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.23 | agCurCfgConsole | 0 | 0 | Enable or disable console output of syslog messages. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.24 | agNewCfgConsole | 0 | 0 | Enable or disable console output of syslog messages. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.29 | agCurCfgBootp | 0 | 0 | Enable or disable the use of BootP, as currently configured in the current_configuration block. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.30 | agNewCfgBootp | 0 | 0 | Enable or disable the use of BootP, in the new_configuration block. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.31 | agSlotNumber | 0 | 0 | Identifies the slot in which this switch is installed. If the agent implementing this MIB is not a blade in a chassis this value … |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.32 | agCurCfgSnmpTimeout | 0 | 0 | Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by … |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.33 | agNewCfgSnmpTimeout | 0 | 0 | Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by … |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.34 | agCurCfgTelnetServerPort | 0 | 0 | The TCP port number that the telnet server listens for telnet sessions. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.35 | agNewCfgTelnetServerPort | 0 | 0 | The TCP port number that the telnet server listens for telnet sessions. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.36 | agClearFlashDump | 0 | 0 | This is an action object to clear the FLASH dump. ok(1) is returned when this object is read. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.37 | agRackId | 0 | 0 | The rack unique identifier. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.38 | agChassis | 0 | 0 | Chassis serial number. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.39 | agCurCfgTftpServerPort | 0 | 0 | The TCP port number that the TFTP server is listening to in the current_configuration block. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.40 | agNewCfgTftpServerPort | 0 | 0 | The TCP port number that the TFTP server is listening to in the new_configuration block. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.49 | agCurCfgHttpsServerPort | 0 | 0 | The TCP port number that the HTTPS server is listening to in the current_configuration block. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.50 | agNewCfgHttpsServerPort | 0 | 0 | The TCP port number that the HTTPS server is listening to in the new_configuration block. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.51 | agCurDaylightSavings | 0 | 0 | The daylight savings location. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.52 | agNewDaylightSavings | 0 | 0 | The daylight savings location. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.53 | agCfgSysDlight | 0 | 0 | Enable/disable daylight savings time. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.55 | agCurCfgIdleCLITimeout | 0 | 0 | Set idle CLI sessions timeout. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.56 | agNewCfgIdleCLITimeout | 0 | 0 | Set idle CLI sessions timeout. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.57 | agCurCfgUfdTrap | 0 | 0 | The current status of the UFDFO SNMP trap. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.58 | agNewCfgUfdTrap | 0 | 0 | Enable or disable sending UFDFO SNMP trap. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.59 | agCurCfgReminders | 0 | 0 | Current status of reminders feature. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.60 | agNewCfgReminders | 0 | 0 | Enable or disable reminders feature. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.66 | agCurBootNxtCliMode | 0 | 0 | Current boot mode. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.67 | agNewBootNxtCliMode | 0 | 0 | Next cli boot mode. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.70 | agCurCfgDhcp | 0 | 0 | Enable or disable the use of DHCP, as currently configured in the current_configuration block. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.71 | agNewCfgDhcp | 0 | 0 | Enable or disable the use of DHCP, in the new_configuration block. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.72 | agCfgL3Status | 0 | 0 | The current status of L3 feature. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.73 | agCurCfgHprompt | 0 | 0 | Current status of hprompt. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.75 | agNewCfgHprompt | 0 | 0 | New status of hpprompt. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.76 | agCurCfgLoginNotice | 0 | 0 | The user defined login notice. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.77 | agNewCfgLoginNotice | 0 | 0 | The user defined login notice. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.78 | agCurBootNxtCliModePrompt | 0 | 0 | Current status of selectable CLI mode prompt. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.79 | agNewBootNxtCliModePrompt | 0 | 0 | Next status of selectable CLI mode prompt. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.82 | agCurCfgOldDst | 0 | 0 | Enable or disable system DST for US. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.83 | agNewCfgOldDst | 0 | 0 | Enable or disable system DST for US. |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.84 | agHavePanicDump | 0 | 0 | This object, when read, gives the user the information whether a panic dump exist in flash. |