This counter is incremented when a RELEASE, RELEASE COMPLETE
(only when not preceded by a RELEASE mesg for the same call),
ADD PARTY REJECT, or STATUS message that contains one of the
following cause code values is received (Note: These cause
values apply to both UNI3.0 and UNI3.1):
Cause Value Meaning
17 user busy
18 no user responding
21 call rejected
22 number changed
23 user rejects all calls with
calling line id restriction
27 destination out of order
31 normal, unspecified
88 incompatible destination
NOTE: For this counter, RELEASE COMPLETE messages that are a
reply to a previous RELEASE message and contain the same cause
value, are redundant (for counting purposes) and should not be
counted.
Note: Cause Value #30 'response to STATUS ENQUIRY' was not
included in this memo since it did not apply to a hard failure.
Parsed from file agilent-wanstats.mib.txt
Company: None
Module: WANSTATS-MIB
This counter is incremented when a RELEASE, RELEASE COMPLETE
(only when not preceded by a RELEASE mesg for the same call),
ADD PARTY REJECT, or STATUS message that contains one of the
following cause code values is received (Note: These cause
values apply to both UNI3.0 and UNI3.1):
Cause Value Meaning
17 user busy
18 no user responding
21 call rejected
22 number changed
23 user rejects all calls with
calling line id restriction
27 destination out of order
31 normal, unspecified
88 incompatible destination
NOTE: For this counter, RELEASE COMPLETE messages that are a
reply to a previous RELEASE message and contain the same cause
value, are redundant (for counting purposes) and should not be
counted.
Note: Cause Value #30 'response to STATUS ENQUIRY' was not
included in this memo since it did not apply to a hard failure.
Parsed from file WANSTATS-MIB.mib
Module: WANSTATS-MIB
Vendor: Hewlett-Packard
Module: WANSTATS-MIB
[Automatically extracted from oidview.com]
wanAtmStatsInUnsuccessfulCalls OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE mesg for the same call), ADD PARTY REJECT, or STATUS message that contains one of the following cause code values is received (Note: These cause values apply to both UNI3.0 and UNI3.1): Cause Value Meaning 17 user busy 18 no user responding 21 call rejected 22 number changed 23 user rejects all calls with calling line id restriction 27 destination out of order 31 normal, unspecified 88 incompatible destination NOTE: For this counter, RELEASE COMPLETE messages that are a reply to a previous RELEASE message and contain the same cause value, are redundant (for counting purposes) and should not be counted. Note: Cause Value #30 'response to STATUS ENQUIRY' was not included in this memo since it did not apply to a hard failure." ::= { wanAtmStatsEntry 15 }
wanAtmStatsInUnsuccessfulCalls OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE mesg for the same call), ADD PARTY REJECT, or STATUS message that contains one of the following cause code values is received (Note: These cause values apply to both UNI3.0 and UNI3.1): Cause Value Meaning 17 user busy 18 no user responding 21 call rejected 22 number changed 23 user rejects all calls with calling line id restriction 27 destination out of order 31 normal, unspecified 88 incompatible destination NOTE: For this counter, RELEASE COMPLETE messages that are a reply to a previous RELEASE message and contain the same cause value, are redundant (for counting purposes) and should not be counted. Note: Cause Value #30 'response to STATUS ENQUIRY' was not included in this memo since it did not apply to a hard failure." ::= { wanAtmStatsEntry 15 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.1 | wanAtmStatsIndex | 0 | 0 | The value of this object uniquely identifies this wanAtmStatsTable entry. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.2 | wanAtmStatsDataSource | 0 | 0 | This object identifies the source of the data that this wanAtmStatsEntry analyzes. This source can be any interface on this devi… |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.3 | wanAtmStatsDropEvents | 0 | 0 | The total number of events in which frames were dropped by the probe due to lack of resources. Note that this number is not nece… |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.4 | wanAtmStatsInCells | 0 | 0 | The total number of cells seen coming from the far end of the link including errored cells. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.5 | wanAtmStatsOutCells | 0 | 0 | The total number of cells seen coming from the near end of the link including errored cells. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.6 | wanAtmStatsInCLP1 | 0 | 0 | The total number of cells with the CLP bit set seen coming from the far end of the link. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.7 | wanAtmStatsOutCLP1 | 0 | 0 | The total number of cells with the CLP bit set seen coming from the near end of the link. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.8 | wanAtmStatsConnectionEvents | 0 | 0 | This counter counts the sum of the following errors: 1) SSCOP Connection Disconnect Counter The abnormal occurrence of this event… |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.9 | wanAtmStatsErroredPDUs | 0 | 0 | This counter counts the sum of the following errors: 1) Invalid PDUs. These are defined in SSCOP and consist of PDUs with incorrec… |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.10 | wanAtmStatsSetupAttempts | 0 | 0 | This counter counts the number of call setup attempts (both successful and unsuccessful) detected on this interface. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.11 | wanAtmStatsInRoutesUnavailable | 0 | 0 | This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE mesg for the same call), ADD PA… |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.12 | wanAtmStatsOutRoutesUnavailable | 0 | 0 | This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE mesg for the same call), ADD PA… |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.13 | wanAtmStatsInResourcesUnavailable | 0 | 0 | This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE mesg for the same call), ADD PA… |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.14 | wanAtmStatsOutResourcesUnavailable | 0 | 0 | This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE mesg for the same call), ADD PA… |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.16 | wanAtmStatsOutUnsuccessfulCalls | 0 | 0 | This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE mesg for the same call), ADD PA… |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.17 | wanAtmStatsInIncorrectMsgs | 0 | 0 | The Incorrect Messages Counter reflects any sort of incorrect information in a message. This includes: ? RELEASE, RELEASE COMPLE… |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.18 | wanAtmStatsOutIncorrectMsgs | 0 | 0 | The Incorrect Messages Counter reflects any sort of incorrect information in a message. This includes: ? RELEASE, RELEASE COMPLE… |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.19 | wanAtmStatsInPartyEvents | 0 | 0 | This counter monitors error events that occur due to the originating user doing something wrong. This counter is incremented when… |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.20 | wanAtmStatsOutPartyEvents | 0 | 0 | This counter monitors error events that occur due to the originating user doing something wrong. This counter is incremented when… |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.21 | wanAtmStatsInExpiries | 0 | 0 | The Timer Expiries Counter provides a count of network timer expiries, and to some extent, host or switch timer expiries. The con… |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.22 | wanAtmStatsOutExpiries | 0 | 0 | The Timer Expiries Counter provides a count of network timer expiries, and to some extent, host or switch timer expiries. The con… |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.23 | wanAtmStatsInRestartErrors | 0 | 0 | The Restart Activity Counter provides a count of host, switch, or network restart activity. This counter is incremented when rece… |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.24 | wanAtmStatsOutRestartErrors | 0 | 0 | The Restart Activity Counter provides a count of host, switch, or network restart activity. This counter is incremented when tran… |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.25 | wanAtmStatsInSVCs | 0 | 0 | SVC VCCs established at this signaling entity for incoming connections. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.26 | wanAtmStatsOutSVCs | 0 | 0 | SVC VCCs established at this signaling entity for outgoing connections. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.27 | wanAtmStatsInOCDs | 0 | 0 | An out of cell delineation from far end of the link. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.28 | wanAtmStatsOutOCDs | 0 | 0 | An out of cell delineation from near end of the link. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.29 | wanAtmStatsInLOCs | 0 | 0 | A loss of cell delineation error from far end of the link. This is a persistent OCD condition. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.30 | wanAtmStatsOutLOCs | 0 | 0 | A loss of cell delineation error from near end of link. This is a persistent OCD condition. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.31 | wanAtmStatsInLOFs | 0 | 0 | A loss of frame error from far end of link. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.32 | wanAtmStatsOutLOFs | 0 | 0 | A loss of frame error from near end of link. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.33 | wanAtmStatsInLOPs | 0 | 0 | A loss of pointer error from far end of link. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.34 | wanAtmStatsOutLOPs | 0 | 0 | A loss of pointer error from near end of link. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.35 | wanAtmStatsInLOSs | 0 | 0 | A loss of signal error from far end of link. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.36 | wanAtmStatsOutLOSs | 0 | 0 | A loss of signal error from near end of link. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.37 | wanAtmStatsOwner | 0 | 0 | The entity that configured this entry. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.38 | wanAtmStatsStatus | 0 | 0 | The status of this wanAtmStatsTable entry. |