Returns or changes the Energy Star sleep value. If the
value is greater than zero, then the device will go into
energy saving sleep mode after the print engine has been
idle for the number of seconds specified by this object.
A value of zero means Energy Star is disabled and the
device will not go to sleep based on print engine idle
time. The value must be non-negative.
Additional information:
The Laserjet 3200 will always be in
sleep mode when not processing data. This object will
always return a value of 1.
Parsed from file lj3200_snmp.mib.txt
Company: None
Module: LJ3200-MIB
Returns or changes the Energy Star sleep value. If the
value is greater than zero, then the device will go into
energy saving sleep mode after the print engine has been
idle for the number of seconds specified by this object.
A value of zero means Energy Star is disabled and the
device will not go to sleep based on print engine idle
time. The value must be non-negative.
Additional information:
Returns or changes the Energy Star sleep value.
The device will go into energy saving sleep
mode after the print engine has been idle for
the number of seconds specified by this
object. LaserJet 5Sisupports values of 0, 900, 1800,
3600, 7200, and 10800; additionally, a value of 10 is
supported in Service Mode (Control Panel or PJL
instigated). A value of 0 means
never go to sleep based on print engine idle
time. Setting to an unsupported value causes
the printer to substitute a value (listed
below) and to return
status.
The values for normal operation are as follow:
<=0 snap to 0
>= 1 and <= 1349 snap to 900 (15 minutes)
>= 1350 and <= 2699 snap to 1800 (30 minutes)
>= 2700 and <= 5399 snap to 3600 (60 minutes)
>= 5400 and <= 8999 snap to 7200 (120 minutes)
>= 9000 snap to 10800 (180 minutes)
The values for Service Mode operation are the same as
above except 10 is a legal value (no snapping). When
the printer exits Service Mode the default value is
restored.
Parsed from file LaserJet5Si-MIB.mib
Module: LaserJet5Si-MIB
Vendor: Hewlett-Packard
Module: CLJ8500-MIB
[Automatically extracted from oidview.com]
energy-star OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Returns or changes the Energy Star sleep value. If the value is greater than zero, then the device will go into energy saving sleep mode after the print engine has been idle for the number of seconds specified by this object. A value of zero means Energy Star is disabled and the device will not go to sleep based on print engine idle time. The value must be non-negative. Additional information: The Laserjet 3200 will always be in sleep mode when not processing data. This object will always return a value of 1." ::= { settings-system 1 }
energy-star OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "Returns or changes the Energy Star sleep value. If the value is greater than zero, then the device will go into energy saving sleep mode after the print engine has been idle for the number of seconds specified by this object. A value of zero means Energy Star is disabled and the device will not go to sleep based on print engine idle time. The value must be non-negative. Additional information: Returns or changes the Energy Star sleep value. The device will go into energy saving sleep mode after the print engine has been idle for the number of seconds specified by this object. LaserJet 5Sisupports values of 0, 900, 1800, 3600, 7200, and 10800; additionally, a value of 10 is supported in Service Mode (Control Panel or PJL instigated). A value of 0 means never go to sleep based on print engine idle time. Setting to an unsupported value causes the printer to substitute a value (listed below) and to return
status. The values for normal operation are as follow: <=0 snap to 0 >= 1 and <= 1349 snap to 900 (15 minutes) >= 1350 and <= 2699 snap to 1800 (30 minutes) >= 2700 and <= 5399 snap to 3600 (60 minutes) >= 5400 and <= 8999 snap to 7200 (120 minutes) >= 9000 snap to 10800 (180 minutes) The values for Service Mode operation are the same as above except 10 is a legal value (no snapping). When the printer exits Service Mode the default value is restored." ::= { settings-system 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.2 | sleep-mode | 0 | 0 | Returns eTrue if the device is in energy saving sleep mode, otherwise returns eFalse. Setting SLEEP-MODE to eFalse causes the de… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.8 | control-panel-lock | 0 | 0 | Device control panel lock. A value of eDisabled means the control panel is unlocked and the device's configuration can be modifi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.9 | service-password | 0 | 0 | When set to the password value, other service related objects become 'visible' (i.e readable) and/or become writable. When writt… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.11 | device-cfg-download | 0 | 0 | Handshaking mechanism between host and device to coordinate the download of device specific data. eCfgDownloadIdle - indicates d… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.12 | device-cfg-download-data-type | 0 | 0 | Indicates the type of device specific data to be downloaded. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.13 | device-cfg-upload | 0 | 0 | Handshaking mechanism between host and device to coordinate the upload of device specific data. eCfgUploadIdle - indicates device… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.14 | device-cfg-upload-data-type | 0 | 0 | Indicates the type of device specific data to be uploaded. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.17 | download-timeout | 0 | 0 | Specifies the number of seconds that device will wait for data from the host before the device determines the host is being unres… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.18 | upload-timeout | 0 | 0 | Specifies the number of seconds that device will wait for response from the host after transmitting a unit of data before the dev… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.21 | run-location | 0 | 0 | Returns or changes the location from which code executes. The object allows the user to pick a memory bank to run code from which… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.22 | date-display, sleep-mode | 0 | 0 | Controls front-panel date display format. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.23 | device-cfg-param-command | 0 | 0 | A C structure containing the following fields: typedef struct { u8bit list_id; s8bit auto_incr; u16bit max_index; u16bit rec_size; u1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.24 | copier-token | 0 | 0 | Provides an advisory locking mechanism for hosts to coordinate exclusive access to a copier device. Setting the object to a uniqu… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.25 | scan-token | 0 | 0 | Provides an advisory locking mechanism for hosts to coordinate exclusive access to a scanner device. Setting the object to a uniq… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.26 | fax-upload-token | 0 | 0 | Provides an advisory locking mechanism for hosts to coordinate exclusive access to the fax upload features of a device. Setting t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.27 | fax-download-token | 0 | 0 | Provides an advisory locking mechanism for hosts to coordinate exclusive access to the fax download features of a device. Settin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.28 | device-config-token | 0 | 0 | Provides an advisory locking mechanism for hosts to coordinate exclusive access to a specific device or subset of device capabili… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.31 | mono-color-switching-mode | 0 | 0 | This object allows the user to view/change the color/mono switching mode for a device. Additional information: This object allows … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32 | device-configure | 1 | 1 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.43 | direct-connect-ports-enable | 0 | 0 | This object specifies whether all direct connect ports(parallel and USB) are available or ignored. JetDirect,embedded network c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.44 | control-panel-supplies-status-message | 0 | 0 | This PML object can be used to enable or disable supplies status messages from being displayed on the control panel. eShow - show… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.50 | speed-energy-usage | 0 | 0 | Option to keep the fuser in a pre-warmed state to speed up first page out. Additional information: Option to keep the fuser in a p… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.65 | power-state | 0 | 0 | This object is used to inquire about and to control the 'powerstate' of the device. The exact meaning of each enumeration mayva… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.68 | factory-reset | 0 | 0 | writing an integer 0 will do factory reset on device-system variables,MFP Settings and the .NET database without a reboot. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.71 | order-cartridge, auto-type-sense-mode | 0 | 0 | Used to enable/disable the supplies status message that isshown when the supply reaches low. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.89 | control-panel-lock, powersave-enable-type | 0 | 0 | ePowerSaveOff - printer stays awake all the time, can onlysleep if sleep button is hit. ePowerSaveUseSleepDelay - usesleep dela… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.97 | large-size-media-default-grain-direction | 0 | 0 | This object identifies default grain direction for large sizemedia (B/A3) only. Default value is eShortGrain. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.99 | start-engine-early-warmup | 0 | 0 | This PML object is used by HP SW drivers to signal the printerthat a job is coming, and to start the warm-up processearly.The e… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.101 | enable-engine-early-warmup, host-generate-copies | 0 | 0 | This object is not used by the printer. The printer holds thisinformation to allow applications generating print jobs to knowth… |