Returns or changes the location from which code
executes. The object allows the user to pick a memory
bank to run code from which is different than the
default running code bank. A value of 0 means the code
executes from the default code bank, which should be
documented in the device POS. The list of supported
values should be documented in the device POS. Setting
to an unsupported value causes the device to return
Additional information:
Returns or changes the location from which code
should be run. The object allows the user to pick a ram bank
to run code from which is potentially faster than the onboard
ROM. LaserJet8100, and LaserJet8000 support values of 0,4-9. LaserJet 8510
supports only a value of 0. A value of 0
means run code from default ROM device. Values other than 0
indicate a valid RAM bank of size >= 8MBs. Setting to an
unsupported value causes the printer to leave the run location
set to its previous value.
Parsed from file LJ8150_staple1.mib.txt
Company: None
Module: LaserJet_Series_8150-MIB
Returns or changes the location from which code
executes. The object allows the user to pick a memory
bank to run code from which is different than the
default running code bank. A value of 0 means the code
executes from the default code bank, which should be
documented in the device POS. The list of supported
values should be documented in the device POS. Setting
to an unsupported value causes the device to return
Additional information:
Returns or changes the location from which code
should be run. The object allows the user to pick a ram bank
to run code from which is potentially faster than the onboard
ROM. Yukon and Koala support values of 0,4-9. A value of 0
means run code from default ROM device. Values other than 0
indicate a valid RAM bank of size >= 8MBs. Setting to an
unsupported value causes the printer to leave the run location
set to its previous value.
Parsed from file LaserJet-Series8000-MIB.mib
Module: LaserJet-Series8000-MIB
Vendor: Hewlett-Packard
Module: HP-LASERJET-COMMON-MIB
[Automatically extracted from oidview.com]
run-location OBJECT-TYPE SYNTAX INTEGER(0..0) ACCESS read-write STATUS optional DESCRIPTION "Returns or changes the location from which code executes. The object allows the user to pick a memory bank to run code from which is different than the default running code bank. A value of 0 means the code executes from the default code bank, which should be documented in the device POS. The list of supported values should be documented in the device POS. Setting to an unsupported value causes the device to return
. Additional information: Returns or changes the location from which code should be run. The object allows the user to pick a ram bank to run code from which is potentially faster than the onboard ROM. LaserJet8100, and LaserJet8000 support values of 0,4-9. LaserJet 8510 supports only a value of 0. A value of 0 means run code from default ROM device. Values other than 0 indicate a valid RAM bank of size >= 8MBs. Setting to an unsupported value causes the printer to leave the run location set to its previous value." ::= { settings-system 21 }
run-location OBJECT-TYPE SYNTAX INTEGER(0..9) ACCESS read-write STATUS optional DESCRIPTION "Returns or changes the location from which code executes. The object allows the user to pick a memory bank to run code from which is different than the default running code bank. A value of 0 means the code executes from the default code bank, which should be documented in the device POS. The list of supported values should be documented in the device POS. Setting to an unsupported value causes the device to return
. Additional information: Returns or changes the location from which code should be run. The object allows the user to pick a ram bank to run code from which is potentially faster than the onboard ROM. Yukon and Koala support values of 0,4-9. A value of 0 means run code from default ROM device. Values other than 0 indicate a valid RAM bank of size >= 8MBs. Setting to an unsupported value causes the printer to leave the run location set to its previous value." ::= { settings-system 21 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.1 | energy-star | 0 | 0 | Returns or changes the Energy Star sleep value. If the value is greater than zero, then the device will go into energy saving sl… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.2 | sleep-mode | 0 | 0 | Returns eTrue if the device is in energy saving sleep mode, otherwise returns eFalse. Setting SLEEP-MODE to eFalse causes the de… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.8 | control-panel-lock | 0 | 0 | Device control panel lock. A value of eDisabled means the control panel is unlocked and the device's configuration can be modifi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.9 | service-password | 0 | 0 | When set to the password value, other service related objects become 'visible' (i.e readable) and/or become writable. When writt… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.11 | device-cfg-download | 0 | 0 | Handshaking mechanism between host and device to coordinate the download of device specific data. eCfgDownloadIdle - indicates d… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.12 | device-cfg-download-data-type | 0 | 0 | Indicates the type of device specific data to be downloaded. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.13 | device-cfg-upload | 0 | 0 | Handshaking mechanism between host and device to coordinate the upload of device specific data. eCfgUploadIdle - indicates device… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.14 | device-cfg-upload-data-type | 0 | 0 | Indicates the type of device specific data to be uploaded. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.17 | download-timeout | 0 | 0 | Specifies the number of seconds that device will wait for data from the host before the device determines the host is being unres… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.18 | upload-timeout | 0 | 0 | Specifies the number of seconds that device will wait for response from the host after transmitting a unit of data before the dev… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.22 | date-display, sleep-mode | 0 | 0 | Controls front-panel date display format. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.23 | device-cfg-param-command | 0 | 0 | A C structure containing the following fields: typedef struct { u8bit list_id; s8bit auto_incr; u16bit max_index; u16bit rec_size; u1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.24 | copier-token | 0 | 0 | Provides an advisory locking mechanism for hosts to coordinate exclusive access to a copier device. Setting the object to a uniqu… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.25 | scan-token | 0 | 0 | Provides an advisory locking mechanism for hosts to coordinate exclusive access to a scanner device. Setting the object to a uniq… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.26 | fax-upload-token | 0 | 0 | Provides an advisory locking mechanism for hosts to coordinate exclusive access to the fax upload features of a device. Setting t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.27 | fax-download-token | 0 | 0 | Provides an advisory locking mechanism for hosts to coordinate exclusive access to the fax download features of a device. Settin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.28 | device-config-token | 0 | 0 | Provides an advisory locking mechanism for hosts to coordinate exclusive access to a specific device or subset of device capabili… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.31 | mono-color-switching-mode | 0 | 0 | This object allows the user to view/change the color/mono switching mode for a device. Additional information: This object allows … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32 | device-configure | 1 | 1 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.43 | direct-connect-ports-enable | 0 | 0 | This object specifies whether all direct connect ports(parallel and USB) are available or ignored. JetDirect,embedded network c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.44 | control-panel-supplies-status-message | 0 | 0 | This PML object can be used to enable or disable supplies status messages from being displayed on the control panel. eShow - show… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.50 | speed-energy-usage | 0 | 0 | Option to keep the fuser in a pre-warmed state to speed up first page out. Additional information: Option to keep the fuser in a p… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.65 | power-state | 0 | 0 | This object is used to inquire about and to control the 'powerstate' of the device. The exact meaning of each enumeration mayva… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.68 | factory-reset | 0 | 0 | writing an integer 0 will do factory reset on device-system variables,MFP Settings and the .NET database without a reboot. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.71 | order-cartridge, auto-type-sense-mode | 0 | 0 | Used to enable/disable the supplies status message that isshown when the supply reaches low. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.89 | control-panel-lock, powersave-enable-type | 0 | 0 | ePowerSaveOff - printer stays awake all the time, can onlysleep if sleep button is hit. ePowerSaveUseSleepDelay - usesleep dela… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.97 | large-size-media-default-grain-direction | 0 | 0 | This object identifies default grain direction for large sizemedia (B/A3) only. Default value is eShortGrain. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.99 | start-engine-early-warmup | 0 | 0 | This PML object is used by HP SW drivers to signal the printerthat a job is coming, and to start the warm-up processearly.The e… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.101 | enable-engine-early-warmup, host-generate-copies | 0 | 0 | This object is not used by the printer. The printer holds thisinformation to allow applications generating print jobs to knowth… |