This object determines if the SMT proxy will generate
traps for SMT events occuring at other stations. If
enabled, the SMT proxy will generate traps for all SMT
events, those that occur locally, and those that occur
at other stations. If disabled, the SMT proxy will only
generate traps for events which occur locally. The
default value for this object is enabled(1).
Parsed from file Lanplex.mib.txt
Company: None
Module: LANPLEX-MIB-1-2-9
This object determines if the SMT proxy will generate
traps for SMT events occuring at other stations. If
enabled, the SMT proxy will generate traps for all SMT
events, those that occur locally, and those that occur
at other stations. If disabled, the SMT proxy will only
generate traps for events which occur locally. The
default value for this object is enabled(1).
Parsed from file LANPLEX-MIB-1-2-9.mib
Module: LANPLEX-MIB-1-2-9
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
lpSystemSmtProxyEvents OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object determines if the SMT proxy will generate traps for SMT events occuring at other stations. If enabled, the SMT proxy will generate traps for all SMT events, those that occur locally, and those that occur at other stations. If disabled, the SMT proxy will only generate traps for events which occur locally. The default value for this object is enabled(1)." ::= { lpSystem 27 }
lpSystemSmtProxyEvents OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object determines if the SMT proxy will generate traps for SMT events occuring at other stations. If enabled, the SMT proxy will generate traps for all SMT events, those that occur locally, and those that occur at other stations. If disabled, the SMT proxy will only generate traps for events which occur locally. The default value for this object is enabled(1)." ::= { lpSystem 27 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.114.1.1.11.27.0 | lpSystemSmtProxyEvents | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.114.1.1.11.1 | lpSystemId | 1 | 1 | The unique identifier assigned to this system during manufacturing. |
1.3.6.1.4.1.114.1.1.11.2 | lpSystemType | 1 | 1 | The type of the LANplex system. |
1.3.6.1.4.1.114.1.1.11.3 | lpSystemName | 1 | 1 | The text string describing this system. |
1.3.6.1.4.1.114.1.1.11.4 | lpSystemManufacturer | 1 | 1 | The text string describing the manufacturer of this system. |
1.3.6.1.4.1.114.1.1.11.5 | lpSystemBackplaneRevision | 1 | 1 | The revision level of the system backplane. Bits 6 and 7 indicate the artwork revision. Bits 0 through 5 indicate the rework leve… |
1.3.6.1.4.1.114.1.1.11.6 | lpSystemSlotCount | 1 | 1 | The number of slots in the system. |
1.3.6.1.4.1.114.1.1.11.7 | lpSystemMemorySize | 1 | 1 | The amount of memory (RAM), in bytes, present on the system processor board. |
1.3.6.1.4.1.114.1.1.11.8 | lpSystemFlashMemorySize | 1 | 1 | The amount of flash memory, in bytes, present on the system processor board. |
1.3.6.1.4.1.114.1.1.11.9 | lpSystemNvMemorySize | 1 | 1 | The amount of non-volatile memory, in bytes, present on the system processor board. |
1.3.6.1.4.1.114.1.1.11.10 | lpSystemSoftwareRevision | 1 | 1 | The revision number of the LANplex system software. Each byte indicates the following: byte 0: major release number. byte 1: minor… |
1.3.6.1.4.1.114.1.1.11.11 | lpSystemBuildTime | 1 | 1 | The build time of the system software. |
1.3.6.1.4.1.114.1.1.11.12 | lpSystemControlPanelHardwareRevision | 1 | 1 | An 8-bit value specifying the revision level of the control panel hardware. |
1.3.6.1.4.1.114.1.1.11.13 | lpSystemControlPanelSoftwareRevision | 1 | 1 | An 8-bit value specifying the revision level of the control panel software. |
1.3.6.1.4.1.114.1.1.11.14 | lpSystemControlPanelLines | 1 | 1 | The number of lines in the control panel display. |
1.3.6.1.4.1.114.1.1.11.15 | lpSystemControlPanelColumns | 1 | 1 | The number of columns in the control panel display. |
1.3.6.1.4.1.114.1.1.11.16 | lpSystemControlPanelText | 1 | 1 | The currently displayed text in the control panel display. |
1.3.6.1.4.1.114.1.1.11.17 | lpSystemFddiMacCount | 1 | 1 | The number of FDDI MAC's present in the system. |
1.3.6.1.4.1.114.1.1.11.18 | lpSystemFddiPortCount | 1 | 1 | The number of FDDI ports present in the system. |
1.3.6.1.4.1.114.1.1.11.19 | lpSystemEthernetPortCount | 1 | 1 | The number of ethernet ports present in the system. |
1.3.6.1.4.1.114.1.1.11.20 | lpSystemExpressFunctionCount | 1 | 1 | The number of Ethernet Express functions present in the system. Curently this value is equal to the number of Express boards pres… |
1.3.6.1.4.1.114.1.1.11.21 | lpSystemExpressFddiPortCount | 1 | 1 | The number of Ethernet Express FDDI ports present in the system. |
1.3.6.1.4.1.114.1.1.11.22 | lpSystemExpressEthernetPortCount | 1 | 1 | The number of Ethernet Express ethernet ports present in the system. |
1.3.6.1.4.1.114.1.1.11.23 | lpSystemPowerSupplyCount | 1 | 1 | The number of power supply units present in the system. |
1.3.6.1.4.1.114.1.1.11.24 | lpSystemAction | 1 | 1 | This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values … |
1.3.6.1.4.1.114.1.1.11.25 | lpSystemBridgeFunctionCount | 1 | 1 | The number of bridge functions present in the system. Curently this value is equal to the sum of the number of Express and Switch… |
1.3.6.1.4.1.114.1.1.11.26 | lpSystemSmtProxyTimeoutBase | 1 | 1 | The initial timeout value, in seconds, before the SMT proxy attempts to backoff and retry. Since the SMT proxy will attempt thre… |