The text string describing this system.
Parsed from file Lanplex.mib.txt
Company: None
Module: LANPLEX-MIB-1-2-9
The text string describing this system.
Parsed from file LANPLEX-MIB-1-2-9.mib
Module: LANPLEX-MIB-1-2-9
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
lpSystemName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "The text string describing this system." ::= { lpSystem 3 }
lpSystemName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "The text string describing this system." ::= { lpSystem 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.114.1.1.11.3.0 | lpSystemName | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.114.1.1.11.1 | lpSystemId | 1 | 1 | The unique identifier assigned to this system during manufacturing. |
1.3.6.1.4.1.114.1.1.11.2 | lpSystemType | 1 | 1 | The type of the LANplex system. |
1.3.6.1.4.1.114.1.1.11.4 | lpSystemManufacturer | 1 | 1 | The text string describing the manufacturer of this system. |
1.3.6.1.4.1.114.1.1.11.5 | lpSystemBackplaneRevision | 1 | 1 | The revision level of the system backplane. Bits 6 and 7 indicate the artwork revision. Bits 0 through 5 indicate the rework leve… |
1.3.6.1.4.1.114.1.1.11.6 | lpSystemSlotCount | 1 | 1 | The number of slots in the system. |
1.3.6.1.4.1.114.1.1.11.7 | lpSystemMemorySize | 1 | 1 | The amount of memory (RAM), in bytes, present on the system processor board. |
1.3.6.1.4.1.114.1.1.11.8 | lpSystemFlashMemorySize | 1 | 1 | The amount of flash memory, in bytes, present on the system processor board. |
1.3.6.1.4.1.114.1.1.11.9 | lpSystemNvMemorySize | 1 | 1 | The amount of non-volatile memory, in bytes, present on the system processor board. |
1.3.6.1.4.1.114.1.1.11.10 | lpSystemSoftwareRevision | 1 | 1 | The revision number of the LANplex system software. Each byte indicates the following: byte 0: major release number. byte 1: minor… |
1.3.6.1.4.1.114.1.1.11.11 | lpSystemBuildTime | 1 | 1 | The build time of the system software. |
1.3.6.1.4.1.114.1.1.11.12 | lpSystemControlPanelHardwareRevision | 1 | 1 | An 8-bit value specifying the revision level of the control panel hardware. |
1.3.6.1.4.1.114.1.1.11.13 | lpSystemControlPanelSoftwareRevision | 1 | 1 | An 8-bit value specifying the revision level of the control panel software. |
1.3.6.1.4.1.114.1.1.11.14 | lpSystemControlPanelLines | 1 | 1 | The number of lines in the control panel display. |
1.3.6.1.4.1.114.1.1.11.15 | lpSystemControlPanelColumns | 1 | 1 | The number of columns in the control panel display. |
1.3.6.1.4.1.114.1.1.11.16 | lpSystemControlPanelText | 1 | 1 | The currently displayed text in the control panel display. |
1.3.6.1.4.1.114.1.1.11.17 | lpSystemFddiMacCount | 1 | 1 | The number of FDDI MAC's present in the system. |
1.3.6.1.4.1.114.1.1.11.18 | lpSystemFddiPortCount | 1 | 1 | The number of FDDI ports present in the system. |
1.3.6.1.4.1.114.1.1.11.19 | lpSystemEthernetPortCount | 1 | 1 | The number of ethernet ports present in the system. |
1.3.6.1.4.1.114.1.1.11.20 | lpSystemExpressFunctionCount | 1 | 1 | The number of Ethernet Express functions present in the system. Curently this value is equal to the number of Express boards pres… |
1.3.6.1.4.1.114.1.1.11.21 | lpSystemExpressFddiPortCount | 1 | 1 | The number of Ethernet Express FDDI ports present in the system. |
1.3.6.1.4.1.114.1.1.11.22 | lpSystemExpressEthernetPortCount | 1 | 1 | The number of Ethernet Express ethernet ports present in the system. |
1.3.6.1.4.1.114.1.1.11.23 | lpSystemPowerSupplyCount | 1 | 1 | The number of power supply units present in the system. |
1.3.6.1.4.1.114.1.1.11.24 | lpSystemAction | 1 | 1 | This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values … |
1.3.6.1.4.1.114.1.1.11.25 | lpSystemBridgeFunctionCount | 1 | 1 | The number of bridge functions present in the system. Curently this value is equal to the sum of the number of Express and Switch… |
1.3.6.1.4.1.114.1.1.11.26 | lpSystemSmtProxyTimeoutBase | 1 | 1 | The initial timeout value, in seconds, before the SMT proxy attempts to backoff and retry. Since the SMT proxy will attempt thre… |
1.3.6.1.4.1.114.1.1.11.27 | lpSystemSmtProxyEvents | 1 | 1 | This object determines if the SMT proxy will generate traps for SMT events occuring at other stations. If enabled, the SMT proxy… |