This object determines whether another device
can remotely access the system console via Telnet,
Rlogin, or modem port.
An existing remote session will not be terminated
when this value is modified.
Parsed from file s2system.mib.txt
Company: None
Module: SWITCHING-SYSTEMS-MIB
This object determines whether another device
can remotely access the system console via Telnet,
Rlogin, or modem port.
An existing remote session will not be terminated
when this value is modified.
Parsed from file SWITCHING-SYSTEMS-MIB.mib
Module: SWITCHING-SYSTEMS-MIB
Vendor: Synernetics, Inc.
Module: SWITCHING-SYSTEMS-MIB
[Automatically extracted from oidview.com]
swSysSystemConsoleAccess OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object determines whether another device can remotely access the system console via Telnet, Rlogin, or modem port. An existing remote session will not be terminated when this value is modified." ::= { swSysSystem 18 }
swSysSystemConsoleAccess OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object determines whether another device can remotely access the system console via Telnet, Rlogin, or modem port. An existing remote session will not be terminated when this value is modified." ::= { swSysSystem 18 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.114.1.4.1.18.0 | swSysSystemConsoleAccess | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.114.1.4.1.1 | lpsSystemId, swSysSystemId | 1 | 1 | The unique identifier assigned to this system during manufacturing. |
1.3.6.1.4.1.114.1.4.1.2 | lpsSystemType, swSysSystemType | 1 | 1 | The type of system. |
1.3.6.1.4.1.114.1.4.1.3 | lpsSystemName, swSysSystemName | 1 | 1 | The text string describing this system. |
1.3.6.1.4.1.114.1.4.1.4 | lpsSystemManufacturer, swSysSystemManufacturer | 1 | 1 | The text string describing the manufacturer of this system. |
1.3.6.1.4.1.114.1.4.1.5 | lpsSystemHardwareRevision, swSysSystemHardwareRevision | 1 | 1 | The revision level of the system, contained in two octets. The first octet indicates the artwork revision, and the second octet … |
1.3.6.1.4.1.114.1.4.1.6 | lpsSystemMemorySize, swSysSystemMemorySize | 1 | 1 | The amount of memory (RAM), in bytes, present on the system processor board. |
1.3.6.1.4.1.114.1.4.1.7 | lpsSystemFlashMemorySize, swSysSystemFlashMemorySize | 1 | 1 | The amount of flash memory, in bytes, present on the system processor board. |
1.3.6.1.4.1.114.1.4.1.8 | lpsSystemNvMemorySize, swSysSystemNvMemorySize | 1 | 1 | The amount of non-volatile memory, in bytes, present on the system processor board. |
1.3.6.1.4.1.114.1.4.1.9 | lpsSystemSoftwareRevision, swSysSystemSoftwareRevision | 1 | 1 | The revision number of the LANplex system software. Each byte indicates the following: byte 0: major release number. byte 1: minor… |
1.3.6.1.4.1.114.1.4.1.10 | lpsSystemBuildTime, swSysSystemBuildTime | 1 | 1 | The build time of the system software. |
1.3.6.1.4.1.114.1.4.1.11 | lpsSystemSnmpRevision, swSysSystemSnmpRevision | 1 | 1 | The revision number of the SNMP agent implementation. |
1.3.6.1.4.1.114.1.4.1.12 | lpsSystemRequestedSnmpMode, swSysSystemRequestedSnmpMode | 1 | 1 | This object describes the requested SNMP mode for the system. The value of this object indicates the mode that will become effec… |
1.3.6.1.4.1.114.1.4.1.13 | lpsSystemCurrentSnmpMode, swSysSystemCurrentSnmpMode | 1 | 1 | This object describes the currently active SNMP mode for the system. Note that only a subset of the above values may be valid fo… |
1.3.6.1.4.1.114.1.4.1.14 | lpsSystemAction, swSysSystemAction | 1 | 1 | This object, when read, always returns the value other(1). Setting this object to the value reset(2) causes a reset of the syste… |
1.3.6.1.4.1.114.1.4.1.15 | lpsSystemOvertemperature, swSysSystemOvertemperature | 1 | 1 | This object indicates the current overtemperature status for the system. If the system does not support overtemperature detectio… |
1.3.6.1.4.1.114.1.4.1.16 | lpsSystemFanFailure, swSysSystemFanFailure | 1 | 1 | This object indicates the current fan status for the system. If the system does not support fan failure detection, this object r… |
1.3.6.1.4.1.114.1.4.1.17 | lpsSystemProtocolMask, swSysSystemProtocolMask | 1 | 1 | This object is a bit mask that indicates which protocols exist in the software image currently loaded in memory. The value of thi… |
1.3.6.1.4.1.114.1.4.1.19 | swSysSystemConsoleReadPwd | 1 | 1 | This object is the console read-access password. |
1.3.6.1.4.1.114.1.4.1.20 | swSysSystemConsoleWritePwd | 1 | 1 | This object is the console write-access password. The read-write community string is required for access to this object. |
1.3.6.1.4.1.114.1.4.1.21 | swSysSystemConsoleAdminPwd | 1 | 1 | This object is the console admin-access password. The read-write community string is required for access to this object. |
1.3.6.1.4.1.114.1.4.1.22 | swSysSystemDateTime | 1 | 1 | The current date and time as reflected by the system clock in the format mm/dd/yy hh:mm:ss xM. |
1.3.6.1.4.1.114.1.4.1.23 | swSysSystemDSTime | 1 | 1 | This parameter specifies the displacement, in minutes, from non-daylight savings time. The swSysDSTime object, along with the sw… |
1.3.6.1.4.1.114.1.4.1.24 | swSysSystemTimeZone | 1 | 1 | This parameter specifies, in minutes, displacement of the system west of Greenwich. A negative number for this parameter indicate… |
1.3.6.1.4.1.114.1.4.1.25 | swSysSystemCurrentFddiStationMode | 1 | 1 | This object describes the current FDDI station mode for systems that support multi-station mode. |
1.3.6.1.4.1.114.1.4.1.26 | swSysSystemRequestedFddiStationMode | 1 | 1 | This object describes the requested FDDI station mode for systems that support multi-station mode. The requested mode will become… |
1.3.6.1.4.1.114.1.4.1.27 | swSysSystemLog | 4 | 13 | None |
1.3.6.1.4.1.114.1.4.1.28 | swSysSystemBaseMACAddress | 1 | 1 | The base MAC address for the system. |
1.3.6.1.4.1.114.1.4.1.29 | swSysSystemMACAddressCount | 1 | 1 | The number of MAC addresses allocated to this system. |
1.3.6.1.4.1.114.1.4.1.30 | swSysSystemChassisSerialNumber | 1 | 1 | The serial number of the chassis. |
1.3.6.1.4.1.114.1.4.1.31 | swSysSystemFPMemorySize | 1 | 1 | The amount of frame processor memory (RAM), in bytes. |
1.3.6.1.4.1.114.1.4.1.32 | swSysSystemBufferSize | 1 | 1 | The amount of buffer memory, in bytes. |