This attribute defines the maximum percentage
of downstream bandwidth that can be allocated
to CBR traffic. This control mechanism will
denied service to acquiring ComPorts if the
addition of the configured CBR bandwidth
would exceed the defined percentage. Note
that this is a limit. i.e. if this attribute
is set to 50%, then UP TO half the bandwidth
can be CBR. It does not mean that half WILL
be CBR. 100%, the default, means in effect
there is no control.
Parsed from file com21.hcxtop.mib.txt
Company: None
Module: COM21-HCXTOP-MIB
This attribute defines the maximum percentage
of downstream bandwidth that can be allocated
to CBR traffic. This control mechanism will
denied service to acquiring ComPorts if the
addition of the configured CBR bandwidth
would exceed the defined percentage. Note
that this is a limit. i.e. if this attribute
is set to 50%, then UP TO half the bandwidth
can be CBR. It does not mean that half WILL
be CBR. 100%, the default, means in effect
there is no control.
Parsed from file COM21-HCXTOP-MIB.mib
Module: COM21-HCXTOP-MIB
Vendor: Com21
Module: COM21-HCXTOP-MIB
[Automatically extracted from oidview.com]
hcxMaxDnstrmCBRAlloc OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION " This attribute defines the maximum percentage of downstream bandwidth that can be allocated to CBR traffic. This control mechanism will denied service to acquiring ComPorts if the addition of the configured CBR bandwidth would exceed the defined percentage. Note that this is a limit. i.e. if this attribute is set to 50%, then UP TO half the bandwidth can be CBR. It does not mean that half WILL be CBR. 100%, the default, means in effect there is no control." ::= { com21HcxControlGroup 29 }
hcxMaxDnstrmCBRAlloc OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION " This attribute defines the maximum percentage of downstream bandwidth that can be allocated to CBR traffic. This control mechanism will denied service to acquiring ComPorts if the addition of the configured CBR bandwidth would exceed the defined percentage. Note that this is a limit. i.e. if this attribute is set to 50%, then UP TO half the bandwidth can be CBR. It does not mean that half WILL be CBR. 100%, the default, means in effect there is no control." ::= { com21HcxControlGroup 29 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1141.2.2.29.0 | hcxMaxDnstrmCBRAlloc | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1141.2.2.1 | hcxMacAddress | 1 | 1 | Contains IEEE 802 medium access control address of the ComController device. |
1.3.6.1.4.1.1141.2.2.2 | hcxEncryptionEnable | 1 | 1 | Used to enable or disable encryption on a system basis. Default is true. |
1.3.6.1.4.1.1141.2.2.3 | hcxPartNumber | 1 | 1 | The ComController Part Number is a display string . |
1.3.6.1.4.1.1141.2.2.4 | hcxEpochTime | 1 | 1 | hcxEpochtime |
1.3.6.1.4.1.1141.2.2.5 | hcxUserText | 1 | 1 | The User Text is a non-volatile string which is set by the management system with an arbitrary value. This value does not have to… |
1.3.6.1.4.1.1141.2.2.6 | hcxSerialNumber | 1 | 1 | The Serial Number is a 32 character number used by COM21 to uniquely identify the device. |
1.3.6.1.4.1.1141.2.2.7 | hcxIpAddress | 1 | 1 | IP address of the ComController SNMP Agent. |
1.3.6.1.4.1.1141.2.2.8 | hcxGatewayAddress | 1 | 1 | IP address of any IP Gateway. Default is 0.0.0.0. |
1.3.6.1.4.1.1141.2.2.9 | hcxRestartAction | 1 | 1 | The Restart Action is an active-value. The setting of this value to warmStart(2) causes the ComController to restart utilizing th… |
1.3.6.1.4.1.1141.2.2.10 | hcxMajorAlarmStatusLed | 1 | 1 | The Major Alarm Status LED is a read-only variable which describes the condition of the ComController Major Alarm Status light em… |
1.3.6.1.4.1.1141.2.2.11 | hcxMinorAlarmStatusLed | 1 | 1 | The Minor Alarm Status LED is a read-only variable which describes the condition of the ComController Minor Alarm Status light em… |
1.3.6.1.4.1.1141.2.2.12 | hcxAutoLoadBalancing | 1 | 1 | This attribute controls whether the ComController shall perform automatic load balancing after an RX resource is added (or restor… |
1.3.6.1.4.1.1141.2.2.13 | hcxAutoFreqHopping | 1 | 1 | This attribute controls whether the ComController shall perform automatic frequency hopping. Note that the auto frequency hopping… |
1.3.6.1.4.1.1141.2.2.14 | hcxKeyRenewalPeriod | 1 | 1 | Contains the period at which encryption keys should be renewed. This attribute is expressed in hours. i.e. value of 48 indicates … |
1.3.6.1.4.1.1141.2.2.16 | hcxHcxSwRelease | 1 | 1 | This attribute details the current, active CC software revision. Format is a.b.c.ddd. |
1.3.6.1.4.1.1141.2.2.18 | hcxHcxSwDnldResult | 1 | 1 | This attribute contains the result of the last ComController software image download from the boot server. |
1.3.6.1.4.1.1141.2.2.21 | hcxCnfgBackupAction | 1 | 1 | This attribute is provided to allow a user to trigger a backup of ComController configuration data on to the boot server. backupT… |
1.3.6.1.4.1.1141.2.2.22 | hcxCnfgBackupResult | 1 | 1 | This attribute contains the result of the last configuration data backup operation. |
1.3.6.1.4.1.1141.2.2.23 | hcxPhyConfigType | 1 | 1 | This attribute details the physical configuration type of the ComController. |
1.3.6.1.4.1.1141.2.2.24 | hcxNumOfShelves | 1 | 1 | This attribute specifies the number of shelves in the system. Presently one or two. |
1.3.6.1.4.1.1141.2.2.25 | hcxBootpServer | 1 | 1 | This attribute contains bootp server hostname. |
1.3.6.1.4.1.1141.2.2.26 | hcxBootpResult | 1 | 1 | This attribute contains the result of the last bootp operation. |
1.3.6.1.4.1.1141.2.2.27 | hcxIpMask | 1 | 1 | IP mask of the ComController SNMP Agent. |
1.3.6.1.4.1.1141.2.2.28 | hcxFreqHopPause | 1 | 1 | This attribute defines the number of seconds between a failed frequency hopping operation and a subsequent attempt. If a given up… |
1.3.6.1.4.1.1141.2.2.30 | hcxMaxUpstrmCBRAlloc | 1 | 1 | This attribute defines the maximum percentage of upstream bandwidth that can be allocated to CBR traffic. Default 100. |
1.3.6.1.4.1.1141.2.2.31 | hcxHcxAlternateSwRel | 1 | 1 | This attribute details the alternate software revision. It is written after cold boot by the CC and later can be written by the u… |
1.3.6.1.4.1.1141.2.2.32 | hcxHcxImageControl | 1 | 1 | This attribute is used to activate a given revision of software images. The CC shall automatically reboot if this field is change… |
1.3.6.1.4.1.1141.2.2.33 | hcxStatsControl | 1 | 1 | This attribute controls the statistics collection mechanism. If previousCounts is selected then the current stats shall be copied… |
1.3.6.1.4.1.1141.2.2.34 | hcxImageTransfer | 1 | 1 | This attribute is used tell the CC to download an individual ComController software image from the boot server (NMAPS) to PCMCIA … |
1.3.6.1.4.1.1141.2.2.35 | hcxTrapFormat | 1 | 1 | specifies the format of the traps generated by the Common Controller. Default is snmpv1. |
1.3.6.1.4.1.1141.2.2.36 | hcxSyncClkConfigure | 1 | 1 | specifies the clock used for synchronization. if networkClk is selected, one of the OC3 card should be selected as the primary sou… |
1.3.6.1.4.1.1141.2.2.37 | hcxSyncClkSelect | 1 | 1 | specifies the clock selected for synchronization. Default is internalClk. |