This attribute is used tell the CC to download an
individual ComController software image from the boot
server (NMAPS) to PCMCIA disk. Images transfered as
a result of this command are not loaded to the
corresponding card - to do this, the uploaded image
must be made to be the primary image and the card must
be rebooted. The images are specified via
a.b.c.ddd format and the image type is one of the
following:
rx - RX card
rxm - RXM card
tx - TX card
cc - CC card
10bt - 10bT card
100bt - 100bT card
oc3 - OC3 card
atm - ATM switch
comp - compact HCX image
stu3com - 3COM modem image(s)
stu - COM21 ComPort images
The CC will check the validity of the revision number
against the hcxHcxSwRelease and hcxHcxAlternateSwRel
values.
Parsed from file com21.hcxtop.mib.txt
Company: None
Module: COM21-HCXTOP-MIB
This attribute is used tell the CC to download an
individual ComController software image from the boot
server (NMAPS) to PCMCIA disk. Images transfered as
a result of this command are not loaded to the
corresponding card - to do this, the uploaded image
must be made to be the primary image and the card must
be rebooted. The images are specified via
a.b.c.ddd format and the image type is one of the
following:
rx - RX card
rxm - RXM card
tx - TX card
cc - CC card
10bt - 10bT card
100bt - 100bT card
oc3 - OC3 card
atm - ATM switch
comp - compact HCX image
stu3com - 3COM modem image(s)
stu - COM21 ComPort images
The CC will check the validity of the revision number
against the hcxHcxSwRelease and hcxHcxAlternateSwRel
values.
Parsed from file COM21-HCXTOP-MIB.mib
Module: COM21-HCXTOP-MIB
Vendor: Com21
Module: COM21-HCXTOP-MIB
[Automatically extracted from oidview.com]
hcxImageTransfer OBJECT-TYPE SYNTAX DisplayString (SIZE(32)) MAX-ACCESS read-write STATUS current DESCRIPTION " This attribute is used tell the CC to download an individual ComController software image from the boot server (NMAPS) to PCMCIA disk. Images transfered as a result of this command are not loaded to the corresponding card - to do this, the uploaded image must be made to be the primary image and the card must be rebooted. The images are specified via
, where the revision is of the a.b.c.ddd format and the image type is one of the following: rx - RX card rxm - RXM card tx - TX card cc - CC card 10bt - 10bT card 100bt - 100bT card oc3 - OC3 card atm - ATM switch comp - compact HCX image stu3com - 3COM modem image(s) stu - COM21 ComPort images The CC will check the validity of the revision number against the hcxHcxSwRelease and hcxHcxAlternateSwRel values." ::= { com21HcxControlGroup 34 }
hcxImageTransfer OBJECT-TYPE SYNTAX DisplayString (SIZE(32)) MAX-ACCESS read-write STATUS current DESCRIPTION " This attribute is used tell the CC to download an individual ComController software image from the boot server (NMAPS) to PCMCIA disk. Images transfered as a result of this command are not loaded to the corresponding card - to do this, the uploaded image must be made to be the primary image and the card must be rebooted. The images are specified via
, where the revision is of the a.b.c.ddd format and the image type is one of the following: rx - RX card rxm - RXM card tx - TX card cc - CC card 10bt - 10bT card 100bt - 100bT card oc3 - OC3 card atm - ATM switch comp - compact HCX image stu3com - 3COM modem image(s) stu - COM21 ComPort images The CC will check the validity of the revision number against the hcxHcxSwRelease and hcxHcxAlternateSwRel values." ::= { com21HcxControlGroup 34 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1141.2.2.34.0 | hcxImageTransfer | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1141.2.2.1 | hcxMacAddress | 1 | 1 | Contains IEEE 802 medium access control address of the ComController device. |
1.3.6.1.4.1.1141.2.2.2 | hcxEncryptionEnable | 1 | 1 | Used to enable or disable encryption on a system basis. Default is true. |
1.3.6.1.4.1.1141.2.2.3 | hcxPartNumber | 1 | 1 | The ComController Part Number is a display string . |
1.3.6.1.4.1.1141.2.2.4 | hcxEpochTime | 1 | 1 | hcxEpochtime |
1.3.6.1.4.1.1141.2.2.5 | hcxUserText | 1 | 1 | The User Text is a non-volatile string which is set by the management system with an arbitrary value. This value does not have to… |
1.3.6.1.4.1.1141.2.2.6 | hcxSerialNumber | 1 | 1 | The Serial Number is a 32 character number used by COM21 to uniquely identify the device. |
1.3.6.1.4.1.1141.2.2.7 | hcxIpAddress | 1 | 1 | IP address of the ComController SNMP Agent. |
1.3.6.1.4.1.1141.2.2.8 | hcxGatewayAddress | 1 | 1 | IP address of any IP Gateway. Default is 0.0.0.0. |
1.3.6.1.4.1.1141.2.2.9 | hcxRestartAction | 1 | 1 | The Restart Action is an active-value. The setting of this value to warmStart(2) causes the ComController to restart utilizing th… |
1.3.6.1.4.1.1141.2.2.10 | hcxMajorAlarmStatusLed | 1 | 1 | The Major Alarm Status LED is a read-only variable which describes the condition of the ComController Major Alarm Status light em… |
1.3.6.1.4.1.1141.2.2.11 | hcxMinorAlarmStatusLed | 1 | 1 | The Minor Alarm Status LED is a read-only variable which describes the condition of the ComController Minor Alarm Status light em… |
1.3.6.1.4.1.1141.2.2.12 | hcxAutoLoadBalancing | 1 | 1 | This attribute controls whether the ComController shall perform automatic load balancing after an RX resource is added (or restor… |
1.3.6.1.4.1.1141.2.2.13 | hcxAutoFreqHopping | 1 | 1 | This attribute controls whether the ComController shall perform automatic frequency hopping. Note that the auto frequency hopping… |
1.3.6.1.4.1.1141.2.2.14 | hcxKeyRenewalPeriod | 1 | 1 | Contains the period at which encryption keys should be renewed. This attribute is expressed in hours. i.e. value of 48 indicates … |
1.3.6.1.4.1.1141.2.2.16 | hcxHcxSwRelease | 1 | 1 | This attribute details the current, active CC software revision. Format is a.b.c.ddd. |
1.3.6.1.4.1.1141.2.2.18 | hcxHcxSwDnldResult | 1 | 1 | This attribute contains the result of the last ComController software image download from the boot server. |
1.3.6.1.4.1.1141.2.2.21 | hcxCnfgBackupAction | 1 | 1 | This attribute is provided to allow a user to trigger a backup of ComController configuration data on to the boot server. backupT… |
1.3.6.1.4.1.1141.2.2.22 | hcxCnfgBackupResult | 1 | 1 | This attribute contains the result of the last configuration data backup operation. |
1.3.6.1.4.1.1141.2.2.23 | hcxPhyConfigType | 1 | 1 | This attribute details the physical configuration type of the ComController. |
1.3.6.1.4.1.1141.2.2.24 | hcxNumOfShelves | 1 | 1 | This attribute specifies the number of shelves in the system. Presently one or two. |
1.3.6.1.4.1.1141.2.2.25 | hcxBootpServer | 1 | 1 | This attribute contains bootp server hostname. |
1.3.6.1.4.1.1141.2.2.26 | hcxBootpResult | 1 | 1 | This attribute contains the result of the last bootp operation. |
1.3.6.1.4.1.1141.2.2.27 | hcxIpMask | 1 | 1 | IP mask of the ComController SNMP Agent. |
1.3.6.1.4.1.1141.2.2.28 | hcxFreqHopPause | 1 | 1 | This attribute defines the number of seconds between a failed frequency hopping operation and a subsequent attempt. If a given up… |
1.3.6.1.4.1.1141.2.2.29 | hcxMaxDnstrmCBRAlloc | 1 | 1 | This attribute defines the maximum percentage of downstream bandwidth that can be allocated to CBR traffic. This control mechanis… |
1.3.6.1.4.1.1141.2.2.30 | hcxMaxUpstrmCBRAlloc | 1 | 1 | This attribute defines the maximum percentage of upstream bandwidth that can be allocated to CBR traffic. Default 100. |
1.3.6.1.4.1.1141.2.2.31 | hcxHcxAlternateSwRel | 1 | 1 | This attribute details the alternate software revision. It is written after cold boot by the CC and later can be written by the u… |
1.3.6.1.4.1.1141.2.2.32 | hcxHcxImageControl | 1 | 1 | This attribute is used to activate a given revision of software images. The CC shall automatically reboot if this field is change… |
1.3.6.1.4.1.1141.2.2.33 | hcxStatsControl | 1 | 1 | This attribute controls the statistics collection mechanism. If previousCounts is selected then the current stats shall be copied… |
1.3.6.1.4.1.1141.2.2.35 | hcxTrapFormat | 1 | 1 | specifies the format of the traps generated by the Common Controller. Default is snmpv1. |
1.3.6.1.4.1.1141.2.2.36 | hcxSyncClkConfigure | 1 | 1 | specifies the clock used for synchronization. if networkClk is selected, one of the OC3 card should be selected as the primary sou… |
1.3.6.1.4.1.1141.2.2.37 | hcxSyncClkSelect | 1 | 1 | specifies the clock selected for synchronization. Default is internalClk. |