This attribute is used to invoke the internal
RX diagnostic test. In order to activate this
test, the card must be placed in the test state.
Parsed from file com21.hcxrx.mib.txt
Company: None
Module: COM21-HCXRX-MIB
This attribute is used to invoke the internal
RX diagnostic test. In order to activate this
test, the card must be placed in the test state.
Parsed from file COM21-HCXRX-MIB.mib
Module: COM21-HCXRX-MIB
Vendor: Com21
Module: COM21-HCXRX-MIB
[Automatically extracted from oidview.com]
hcxUpDiagTestAction OBJECT-TYPE SYNTAX INTEGER { nil(1), execute(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " This attribute is used to invoke the internal RX diagnostic test. In order to activate this test, the card must be placed in the test state." ::= { com21HcxUpstrmUnitEntry 11 }
hcxUpDiagTestAction OBJECT-TYPE SYNTAX INTEGER { nil(1), execute(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " This attribute is used to invoke the internal RX diagnostic test. In order to activate this test, the card must be placed in the test state." ::= { com21HcxUpstrmUnitEntry 11 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1141.2.33.1.1.1 | hcxUpstreamShelfId | 0 | 0 | contains upstream shelf id. |
1.3.6.1.4.1.1141.2.33.1.1.2 | hcxUpstreamSlotId | 0 | 0 | contains upstream unit id. This is the slot number. |
1.3.6.1.4.1.1141.2.33.1.1.3 | hcxUpstreamHardwareVersion | 0 | 0 | contains the hardware version of the RX card. Will be empty if card not present. |
1.3.6.1.4.1.1141.2.33.1.1.4 | hcxUpstreamBootVersion | 0 | 0 | contains the version of the RX card boot ROM. This will be an empty string if card is missing. |
1.3.6.1.4.1.1141.2.33.1.1.5 | hcxUpstreamUnitPrimServState | 0 | 0 | contains primary service state of the Upstream Unit. |
1.3.6.1.4.1.1141.2.33.1.1.6 | hcxUpstreamUnitSecServState | 0 | 0 | contains a string defining the secondary service states of the Upstream Unit. The substrings supported by the Upstream Unit shall… |
1.3.6.1.4.1.1141.2.33.1.1.7 | hcxUpstreamUnitConfigState | 0 | 0 | The Upstream Unit State is an active-value. Offline will disable the RF and all other cell forwarding. Online enables RF and perfo… |
1.3.6.1.4.1.1141.2.33.1.1.8 | hcxUpstreamUnitRestartAction | 0 | 0 | The RX Unit Restart Action is an active-value. The setting of this attribute to restart(2) causes the RX card to reset and downlo… |
1.3.6.1.4.1.1141.2.33.1.1.9 | hcxUpstreamGroupId | 0 | 0 | The Upstream group id defines the receiver group to which this RF Receiver belongs. The shall ensure that the group contains a si… |
1.3.6.1.4.1.1141.2.33.1.1.10 | hcxAcquisitionEnable | 0 | 0 | Used to select an RF Receiver for acquisition. The ComController shall ensure that only one RX card in a receiver group is select… |
1.3.6.1.4.1.1141.2.33.1.1.12 | hcxUpDiagTestResult | 0 | 0 | This attribute contains the result of the last RX diagnostic test. |
1.3.6.1.4.1.1141.2.33.1.1.13 | hcxUpTestStatusLed | 0 | 0 | The RX Test Status LED is a read-only attribute which describes the condition of the RX Test Status light emitting diode located … |
1.3.6.1.4.1.1141.2.33.1.1.14 | hcxUpFaultStatusLed | 0 | 0 | The RX Fault Status LED is a read-only attribute which describes the condition of the RX Fault Status light emitting diode locate… |
1.3.6.1.4.1.1141.2.33.1.1.15 | hcxUpstreamSerialNumber | 0 | 0 | contains the serial number of the RX card. This will be an empty string if card is missing. |