The Upstream group id defines the receiver
group to which this RF Receiver belongs. The
shall ensure that the group contains a single RF
Receiver card operating as an ComPort acquirer.
Default is group 1.
Parsed from file com21.hcxrx.mib.txt
Company: None
Module: COM21-HCXRX-MIB
The Upstream group id defines the receiver
group to which this RF Receiver belongs. The
shall ensure that the group contains a single RF
Receiver card operating as an ComPort acquirer.
Default is group 1.
Parsed from file COM21-HCXRX-MIB.mib
Module: COM21-HCXRX-MIB
Vendor: Com21
Module: COM21-HCXRX-MIB
[Automatically extracted from oidview.com]
hcxUpstreamGroupId OBJECT-TYPE SYNTAX INTEGER (1..12) MAX-ACCESS read-write STATUS current DESCRIPTION " The Upstream group id defines the receiver group to which this RF Receiver belongs. The shall ensure that the group contains a single RF Receiver card operating as an ComPort acquirer. Default is group 1." ::= { com21HcxUpstrmUnitEntry 9 }
hcxUpstreamGroupId OBJECT-TYPE SYNTAX INTEGER (1..12) MAX-ACCESS read-write STATUS current DESCRIPTION " The Upstream group id defines the receiver group to which this RF Receiver belongs. The shall ensure that the group contains a single RF Receiver card operating as an ComPort acquirer. Default is group 1." ::= { com21HcxUpstrmUnitEntry 9 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1141.2.33.1.1.1 | hcxUpstreamShelfId | 0 | 0 | contains upstream shelf id. |
1.3.6.1.4.1.1141.2.33.1.1.2 | hcxUpstreamSlotId | 0 | 0 | contains upstream unit id. This is the slot number. |
1.3.6.1.4.1.1141.2.33.1.1.3 | hcxUpstreamHardwareVersion | 0 | 0 | contains the hardware version of the RX card. Will be empty if card not present. |
1.3.6.1.4.1.1141.2.33.1.1.4 | hcxUpstreamBootVersion | 0 | 0 | contains the version of the RX card boot ROM. This will be an empty string if card is missing. |
1.3.6.1.4.1.1141.2.33.1.1.5 | hcxUpstreamUnitPrimServState | 0 | 0 | contains primary service state of the Upstream Unit. |
1.3.6.1.4.1.1141.2.33.1.1.6 | hcxUpstreamUnitSecServState | 0 | 0 | contains a string defining the secondary service states of the Upstream Unit. The substrings supported by the Upstream Unit shall… |
1.3.6.1.4.1.1141.2.33.1.1.7 | hcxUpstreamUnitConfigState | 0 | 0 | The Upstream Unit State is an active-value. Offline will disable the RF and all other cell forwarding. Online enables RF and perfo… |
1.3.6.1.4.1.1141.2.33.1.1.8 | hcxUpstreamUnitRestartAction | 0 | 0 | The RX Unit Restart Action is an active-value. The setting of this attribute to restart(2) causes the RX card to reset and downlo… |
1.3.6.1.4.1.1141.2.33.1.1.10 | hcxAcquisitionEnable | 0 | 0 | Used to select an RF Receiver for acquisition. The ComController shall ensure that only one RX card in a receiver group is select… |
1.3.6.1.4.1.1141.2.33.1.1.11 | hcxUpDiagTestAction | 0 | 0 | This attribute is used to invoke the internal RX diagnostic test. In order to activate this test, the card must be placed in the … |
1.3.6.1.4.1.1141.2.33.1.1.12 | hcxUpDiagTestResult | 0 | 0 | This attribute contains the result of the last RX diagnostic test. |
1.3.6.1.4.1.1141.2.33.1.1.13 | hcxUpTestStatusLed | 0 | 0 | The RX Test Status LED is a read-only attribute which describes the condition of the RX Test Status light emitting diode located … |
1.3.6.1.4.1.1141.2.33.1.1.14 | hcxUpFaultStatusLed | 0 | 0 | The RX Fault Status LED is a read-only attribute which describes the condition of the RX Fault Status light emitting diode locate… |
1.3.6.1.4.1.1141.2.33.1.1.15 | hcxUpstreamSerialNumber | 0 | 0 | contains the serial number of the RX card. This will be an empty string if card is missing. |