contains type of Ethernet port.
Parsed from file com21.hcxeth.mib.txt
Company: None
Module: COM21-HCXETH-MIB
contains type of Ethernet port.
Parsed from file COM21-HCXETH-MIB.mib
Module: COM21-HCXETH-MIB
Vendor: Com21
Module: COM21-HCXETH-MIB
[Automatically extracted from oidview.com]
hcxEtherPortType OBJECT-TYPE SYNTAX INTEGER { tenBaseT (1), onehundredBaseT (2) } MAX-ACCESS read-only STATUS current DESCRIPTION " contains type of Ethernet port." ::= { com21HcxEtherPortEntry 4 }
hcxEtherPortType OBJECT-TYPE SYNTAX INTEGER { tenBaseT (1), onehundredBaseT (2) } MAX-ACCESS read-only STATUS current DESCRIPTION " contains type of Ethernet port." ::= { com21HcxEtherPortEntry 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1141.2.42.1.1.1 | hcxEtherPortShelfId | 0 | 0 | contains shelf in which this Ethernet port is located. |
1.3.6.1.4.1.1141.2.42.1.1.2 | hcxEtherPortSlotId | 0 | 0 | contains slot in which this Ethernet port is located. |
1.3.6.1.4.1.1141.2.42.1.1.3 | hcxEtherPortId | 0 | 0 | contains Ethernet port id. Represents the port number on the card. In the case of single 10baseT or 100baseT, this value will alw… |
1.3.6.1.4.1.1141.2.42.1.1.5 | hcxEtherPortService | 0 | 0 | contains string defining the service provided by the Ethernet port (VLAN). Set by NMAPS. Default null string. CC most ensure uniq… |
1.3.6.1.4.1.1141.2.42.1.1.6 | hcxEtherPortPrimServState | 0 | 0 | contains primary service state of the Ethernet Unit. This state shall be effected by the hcxEtherPortState attribute. |
1.3.6.1.4.1.1141.2.42.1.1.7 | hcxEtherPortSecServState | 0 | 0 | contains a string defining the secondary service states of the Ethernet Unit. The substrings supported by the Ethernet Unit shall… |
1.3.6.1.4.1.1141.2.42.1.1.9 | hcxEtherMaxBandwidth | 0 | 0 | This attribute defines the maximum output payload bandwidth associated with the Ethernet port. Defined in thousands of bps. From … |
1.3.6.1.4.1.1141.2.42.1.1.12 | hcxEtherAggrDnStrmCbrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort downstream CBR rates configured on the Ethernet port (VLAN). This includes … |
1.3.6.1.4.1.1141.2.42.1.1.13 | hcxEtherAggrDnStrmPcrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort downstream PCR rates configured on the Ethernet port (VLAN). This includes … |
1.3.6.1.4.1.1141.2.42.1.1.14 | hcxEtherAggrUpStrmCbrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream CBR rates configured on the Ethernet port (VLAN). This includes bo… |
1.3.6.1.4.1.1141.2.42.1.1.15 | hcxEtherAggrUpStrmMinRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream minimum PCR rates on the Ethernet port (VLAN). This includes both … |
1.3.6.1.4.1.1141.2.42.1.1.16 | hcxEtherAggrUpStrmMaxRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream maximum cell rates on the Ethernet port (VLAN). This includes both… |
1.3.6.1.4.1.1141.2.42.1.1.17 | hcxEtherAgeTime | 0 | 0 | This attribute defines, in seconds, the aging time for non-accessed entries in the Bridge mapping table. The default shall be 300… |
1.3.6.1.4.1.1141.2.42.1.1.18 | hcxEtherPortConfigState | 0 | 0 | The Ethernet Port State is an active-value. The Ethernet port will default to offline, in which case no traffic shall be passed. … |
1.3.6.1.4.1.1141.2.42.1.1.19 | hcxEtherPortRestartAction | 0 | 0 | The Ethernet Port Restart Action is an active-value. The setting of this attribute to restart(2) causes the Ethernet port to rese… |
1.3.6.1.4.1.1141.2.42.1.1.20 | hcxEtherPortDiagTestAction | 0 | 0 | This attribute is used to invoke the internal Ethernet card diagnostic test. In order to activate this test, the card must be pla… |
1.3.6.1.4.1.1141.2.42.1.1.21 | hcxEtherPortDiagTestResult | 0 | 0 | This attribute contains the result of the last Ethernet port diagnostic test. |
1.3.6.1.4.1.1141.2.42.1.1.22 | hcxEtherPortLinkStatusLed | 0 | 0 | The Ethernet Link Status LED is a read-only attribute which describes the condition of the Ethernet Link Status light emitting di… |
1.3.6.1.4.1.1141.2.42.1.1.24 | hcxEtherPortArpFiltRate | 0 | 0 | No longer supported |
1.3.6.1.4.1.1141.2.42.1.1.25 | hcxEtherAggrActDnStrmCbrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort downstream CBR rates active on the Ethernet port (VLAN). This includes only… |
1.3.6.1.4.1.1141.2.42.1.1.26 | hcxEtherAggrActDnStrmPcrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort downstream PCR rates active on the Ethernet port (VLAN). This includes only… |
1.3.6.1.4.1.1141.2.42.1.1.27 | hcxEtherAggrActUpStrmCbrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream CBR rates active on the Ethernet port (VLAN). This includes only a… |
1.3.6.1.4.1.1141.2.42.1.1.28 | hcxEtherAggrActUpStrmMinRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream minimum PCR rates active on the Ethernet port (VLAN). This include… |
1.3.6.1.4.1.1141.2.42.1.1.29 | hcxEtherAggrActUpStrmMaxRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream maximum cell rates active on the Ethernet port (VLAN). This includ… |
1.3.6.1.4.1.1141.2.42.1.1.30 | hcxEtherPortIpAddr | 0 | 0 | IP Address associated with this ethernet port. This is a future item for telephone return support. |
1.3.6.1.4.1.1141.2.42.1.1.31 | hcxEtherPortIpMask | 0 | 0 | IP mask associated with port. Default is ff.ff.ff.ff. This is a future item for telephone return support. |
1.3.6.1.4.1.1141.2.42.1.1.32 | hcxEtherPortMacAddr | 0 | 0 | MAC address associated with port. |
1.3.6.1.4.1.1141.2.42.1.1.33 | hcxEtherPortAutoNegEnable | 0 | 0 | This attribute is used for 100BaseT ports ONLY, to enable/disable Auto Negotiation Feature. Default is Auto Negotiation Enable. F… |
1.3.6.1.4.1.1141.2.42.1.1.34 | hcxEtherPortSpeedSelect | 0 | 0 | If 'hcxEtherPortAutoNegEnble' is set to 'off' then the Media speed of the port is set to the value in this attribute. This attri… |
1.3.6.1.4.1.1141.2.42.1.1.35 | hcxEtherCurrPortState | 0 | 0 | specifies the Media speed of the port. |