.
Parsed from file com21.hcxoc3.mib.txt
Company: None
Module: COM21-HCXOC3-MIB
.
Parsed from file COM21-HCXOC3-MIB.mib
Module: COM21-HCXOC3-MIB
Vendor: Com21
Module: COM21-HCXOC3-MIB
[Automatically extracted from oidview.com]
com21HcxOc3PortEntry OBJECT-TYPE SYNTAX HcxOc3PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "." INDEX { hcxOc3PortShelfId, hcxOc3PortSlotId, hcxOc3PortId } ::= { com21HcxOc3PortTable 1 }
com21HcxOc3PortEntry OBJECT-TYPE SYNTAX HcxOc3PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "." INDEX { hcxOc3PortShelfId, hcxOc3PortSlotId, hcxOc3PortId } ::= { com21HcxOc3PortTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1141.2.92.1.1.1 | hcxOc3PortShelfId | 0 | 0 | contains shelf in which this Oc3 port is located. |
1.3.6.1.4.1.1141.2.92.1.1.2 | hcxOc3PortSlotId | 0 | 0 | contains slot in which this Oc3 port is located. |
1.3.6.1.4.1.1141.2.92.1.1.3 | hcxOc3PortId | 0 | 0 | contains port Id Oc3 port. |
1.3.6.1.4.1.1141.2.92.1.1.4 | hcxOc3PortPrimServState | 0 | 0 | contains primary service state of the Oc3 Unit. This state shall be effected by the hcxOc3PortState attribute. |
1.3.6.1.4.1.1141.2.92.1.1.5 | hcxOc3PortSecServState | 0 | 0 | contains a string defining the secondary service states of the Oc3 Unit. The substrings supported by the Oc3 Unit shall be: MT - … |
1.3.6.1.4.1.1141.2.92.1.1.6 | hcxOc3MaxBandwidth | 0 | 0 | This attribute defines the maximum output payload bandwidth associated with the Oc3 port. Defined in thousands of bps. From 0 to … |
1.3.6.1.4.1.1141.2.92.1.1.7 | hcxOc3AggrDnStrmCbrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort downstream CBR rates configured on the Oc3 port This includes both acquired… |
1.3.6.1.4.1.1141.2.92.1.1.8 | hcxOc3AggrDnStrmPcrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort downstream PCR rates configured on the Oc3 port This includes both acquired… |
1.3.6.1.4.1.1141.2.92.1.1.9 | hcxOc3AggrUpStrmCbrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream CBR rates configured on the Oc3 port This includes both acquired a… |
1.3.6.1.4.1.1141.2.92.1.1.10 | hcxOc3AggrUpStrmMinRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream minimum PCR rates on the Oc3 port This includes both acquired and … |
1.3.6.1.4.1.1141.2.92.1.1.11 | hcxOc3AggrUpStrmMaxRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream maximum cell rates on the Oc3 port This includes both acquired and… |
1.3.6.1.4.1.1141.2.92.1.1.12 | hcxOc3AgeTime | 0 | 0 | This attribute defines, in seconds, the aging time for non-accessed entries in the Bridge mapping table. The default shall be 300… |
1.3.6.1.4.1.1141.2.92.1.1.13 | hcxOc3PortConfigState | 0 | 0 | The Oc3 Port State is an active-value. The Oc3 port will default to offline, in which case no traffic shall be passed. Default of… |
1.3.6.1.4.1.1141.2.92.1.1.14 | hcxOc3PortRestartAction | 0 | 0 | The Oc3 Port Restart Action is an active-value. The setting of this attribute to restart(2) causes the Oc3 port to reset and down… |
1.3.6.1.4.1.1141.2.92.1.1.15 | hcxOc3PortDiagTestAction | 0 | 0 | This attribute is used to invoke the internal Oc3 card diagnostic test. In order to activate this test, the card must be placed i… |
1.3.6.1.4.1.1141.2.92.1.1.16 | hcxOc3PortDiagTestResult | 0 | 0 | This attribute contains the result of the last Oc3 port diagnostic test. |
1.3.6.1.4.1.1141.2.92.1.1.17 | hcxOc3PortLOSLed | 0 | 0 | The OC3 Loss Of Signal LED indicates whether a Loss of Signal is present on the WAN side of the OC3 port. |
1.3.6.1.4.1.1141.2.92.1.1.18 | hcxOc3AggrActDnStrmCbrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort downstream CBR rates active on the Oc3 port (VLAN). This includes only acqu… |
1.3.6.1.4.1.1141.2.92.1.1.19 | hcxOc3AggrActDnStrmPcrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort downstream PCR rates active on the Oc3 port (VLAN). This includes only acqu… |
1.3.6.1.4.1.1141.2.92.1.1.20 | hcxOc3AggrActUpStrmCbrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream CBR rates active on the Oc3 port (VLAN). This includes only acqui… |
1.3.6.1.4.1.1141.2.92.1.1.21 | hcxOc3AggrActUpStrmMinRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream minimum PCR rates active on the Oc3 port (VLAN). This includes onl… |
1.3.6.1.4.1.1141.2.92.1.1.22 | hcxOc3AggrActUpStrmMaxRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream maximum cell rates active on the Oc3 port (VLAN). This includes on… |
1.3.6.1.4.1.1141.2.92.1.1.23 | hcxOc3PortIpAddr | 0 | 0 | IP Address associated with this ethernet port. This is a future item for telephone return support. |
1.3.6.1.4.1.1141.2.92.1.1.24 | hcxOc3PortIpMask | 0 | 0 | IP mask associated with port. Default is ff.ff.ff.ff. This is a future item for telephone return support. |
1.3.6.1.4.1.1141.2.92.1.1.25 | hcxOc3PortMacAddr | 0 | 0 | MAC address associated with port. |
1.3.6.1.4.1.1141.2.92.1.1.26 | hcxOc3Port1483EncapEnbl | 0 | 0 | This attribute is used to Enable/Disable 1483 Encapsulation on the Oc3Port. If enabled, then all Ethernet packets received by the … |
1.3.6.1.4.1.1141.2.92.1.1.27 | hcxOc3PortSectionLOS | 0 | 0 | This attribute indicates whether Section Loss of Signal is present at the OC3 Port. Default: off. |
1.3.6.1.4.1.1141.2.92.1.1.28 | hcxOc3PortSectionLOF | 0 | 0 | This attribute indicates whether Section Loss of Frame is present at the OC3 Port. Default: off. |
1.3.6.1.4.1.1141.2.92.1.1.29 | hcxOc3PortLineAIS | 0 | 0 | This attribute indicates whether Line Alarm Indication Signal is detected by the OC3 Port Default: off. |
1.3.6.1.4.1.1141.2.92.1.1.30 | hcxOc3PortLineRDI | 0 | 0 | This attribute indicates whether Line Remote Defect Indication is detected by the OC3 Port Default: off. |
1.3.6.1.4.1.1141.2.92.1.1.31 | hcxOc3PortPathRDI | 0 | 0 | This attribute indicates whether Path Remote Defect Indication is detected by the OC3 Port Default: off. |
1.3.6.1.4.1.1141.2.92.1.1.32 | hcxOc3PortAggrVoiceRate | 0 | 0 | This attribute specifies the aggregate Rate of all Voice Channels configured on this Port. A voice channel is considered configur… |
1.3.6.1.4.1.1141.2.92.1.1.33 | hcxOc3PortAggrActVoiceRate | 0 | 0 | This attribute specifies the aggregate Rate of all Voice Channels Active on this Port. A voice channel is considered Active on thi… |
1.3.6.1.4.1.1141.2.92.1.1.34 | hcxOc3PortLOFLed | 0 | 0 | The OC3 Loss Of Frame LED indicates whether a Loss of Frame is present on the WAN side of the OC3 port. |