This attribute defines the maximum output payload
bandwidth associated with the Oc3 port. Defined
in thousands of bps. From 0 to 22222. This value shall
be checked by the CC which shall ensure that
the aggregate of the hcxOc3MaxBandwidth and
hcxEtherMaxBandwidth attributes
for each of the Oc3 and Ethernet ports does not exceed
the system maximum.
If Voice Channels are configured on this Port,
and if Voice channels are active, Ondemand
Data bandwidth will get squeezed if Voice Channels
are active.
Default: 7000
Parsed from file com21.hcxoc3.mib.txt
Company: None
Module: COM21-HCXOC3-MIB
This attribute defines the maximum output payload
bandwidth associated with the Oc3 port. Defined
in thousands of bps. From 0 to 22222. This value shall
be checked by the CC which shall ensure that
the aggregate of the hcxOc3MaxBandwidth and
hcxEtherMaxBandwidth attributes
for each of the Oc3 and Ethernet ports does not exceed
the system maximum.
If Voice Channels are configured on this Port,
and if Voice channels are active, Ondemand
Data bandwidth will get squeezed if Voice Channels
are active.
Default: 7000
Parsed from file COM21-HCXOC3-MIB.mib
Module: COM21-HCXOC3-MIB
Vendor: Com21
Module: COM21-HCXOC3-MIB
[Automatically extracted from oidview.com]
hcxOc3MaxBandwidth OBJECT-TYPE SYNTAX INTEGER (0..22222) MAX-ACCESS read-write STATUS current DESCRIPTION " This attribute defines the maximum output payload bandwidth associated with the Oc3 port. Defined in thousands of bps. From 0 to 22222. This value shall be checked by the CC which shall ensure that the aggregate of the hcxOc3MaxBandwidth and hcxEtherMaxBandwidth attributes for each of the Oc3 and Ethernet ports does not exceed the system maximum. If Voice Channels are configured on this Port, and if Voice channels are active, Ondemand Data bandwidth will get squeezed if Voice Channels are active. Default: 7000 " ::= { com21HcxOc3PortEntry 6 }
hcxOc3MaxBandwidth OBJECT-TYPE SYNTAX INTEGER (0..22222) MAX-ACCESS read-write STATUS current DESCRIPTION " This attribute defines the maximum output payload bandwidth associated with the Oc3 port. Defined in thousands of bps. From 0 to 22222. This value shall be checked by the CC which shall ensure that the aggregate of the hcxOc3MaxBandwidth and hcxEtherMaxBandwidth attributes for each of the Oc3 and Ethernet ports does not exceed the system maximum. If Voice Channels are configured on this Port, and if Voice channels are active, Ondemand Data bandwidth will get squeezed if Voice Channels are active. Default: 7000 " ::= { com21HcxOc3PortEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1141.2.92.1.1.1 | hcxOc3PortShelfId | 0 | 0 | contains shelf in which this Oc3 port is located. |
| 1.3.6.1.4.1.1141.2.92.1.1.2 | hcxOc3PortSlotId | 0 | 0 | contains slot in which this Oc3 port is located. |
| 1.3.6.1.4.1.1141.2.92.1.1.3 | hcxOc3PortId | 0 | 0 | contains port Id Oc3 port. |
| 1.3.6.1.4.1.1141.2.92.1.1.4 | hcxOc3PortPrimServState | 0 | 0 | contains primary service state of the Oc3 Unit. This state shall be effected by the hcxOc3PortState attribute. |
| 1.3.6.1.4.1.1141.2.92.1.1.5 | hcxOc3PortSecServState | 0 | 0 | contains a string defining the secondary service states of the Oc3 Unit. The substrings supported by the Oc3 Unit shall be: MT - … |
| 1.3.6.1.4.1.1141.2.92.1.1.7 | hcxOc3AggrDnStrmCbrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort downstream CBR rates configured on the Oc3 port This includes both acquired… |
| 1.3.6.1.4.1.1141.2.92.1.1.8 | hcxOc3AggrDnStrmPcrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort downstream PCR rates configured on the Oc3 port This includes both acquired… |
| 1.3.6.1.4.1.1141.2.92.1.1.9 | hcxOc3AggrUpStrmCbrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream CBR rates configured on the Oc3 port This includes both acquired a… |
| 1.3.6.1.4.1.1141.2.92.1.1.10 | hcxOc3AggrUpStrmMinRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream minimum PCR rates on the Oc3 port This includes both acquired and … |
| 1.3.6.1.4.1.1141.2.92.1.1.11 | hcxOc3AggrUpStrmMaxRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream maximum cell rates on the Oc3 port This includes both acquired and… |
| 1.3.6.1.4.1.1141.2.92.1.1.12 | hcxOc3AgeTime | 0 | 0 | This attribute defines, in seconds, the aging time for non-accessed entries in the Bridge mapping table. The default shall be 300… |
| 1.3.6.1.4.1.1141.2.92.1.1.13 | hcxOc3PortConfigState | 0 | 0 | The Oc3 Port State is an active-value. The Oc3 port will default to offline, in which case no traffic shall be passed. Default of… |
| 1.3.6.1.4.1.1141.2.92.1.1.14 | hcxOc3PortRestartAction | 0 | 0 | The Oc3 Port Restart Action is an active-value. The setting of this attribute to restart(2) causes the Oc3 port to reset and down… |
| 1.3.6.1.4.1.1141.2.92.1.1.15 | hcxOc3PortDiagTestAction | 0 | 0 | This attribute is used to invoke the internal Oc3 card diagnostic test. In order to activate this test, the card must be placed i… |
| 1.3.6.1.4.1.1141.2.92.1.1.16 | hcxOc3PortDiagTestResult | 0 | 0 | This attribute contains the result of the last Oc3 port diagnostic test. |
| 1.3.6.1.4.1.1141.2.92.1.1.17 | hcxOc3PortLOSLed | 0 | 0 | The OC3 Loss Of Signal LED indicates whether a Loss of Signal is present on the WAN side of the OC3 port. |
| 1.3.6.1.4.1.1141.2.92.1.1.18 | hcxOc3AggrActDnStrmCbrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort downstream CBR rates active on the Oc3 port (VLAN). This includes only acqu… |
| 1.3.6.1.4.1.1141.2.92.1.1.19 | hcxOc3AggrActDnStrmPcrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort downstream PCR rates active on the Oc3 port (VLAN). This includes only acqu… |
| 1.3.6.1.4.1.1141.2.92.1.1.20 | hcxOc3AggrActUpStrmCbrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream CBR rates active on the Oc3 port (VLAN). This includes only acqui… |
| 1.3.6.1.4.1.1141.2.92.1.1.21 | hcxOc3AggrActUpStrmMinRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream minimum PCR rates active on the Oc3 port (VLAN). This includes onl… |
| 1.3.6.1.4.1.1141.2.92.1.1.22 | hcxOc3AggrActUpStrmMaxRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream maximum cell rates active on the Oc3 port (VLAN). This includes on… |
| 1.3.6.1.4.1.1141.2.92.1.1.23 | hcxOc3PortIpAddr | 0 | 0 | IP Address associated with this ethernet port. This is a future item for telephone return support. |
| 1.3.6.1.4.1.1141.2.92.1.1.24 | hcxOc3PortIpMask | 0 | 0 | IP mask associated with port. Default is ff.ff.ff.ff. This is a future item for telephone return support. |
| 1.3.6.1.4.1.1141.2.92.1.1.25 | hcxOc3PortMacAddr | 0 | 0 | MAC address associated with port. |
| 1.3.6.1.4.1.1141.2.92.1.1.26 | hcxOc3Port1483EncapEnbl | 0 | 0 | This attribute is used to Enable/Disable 1483 Encapsulation on the Oc3Port. If enabled, then all Ethernet packets received by the … |
| 1.3.6.1.4.1.1141.2.92.1.1.27 | hcxOc3PortSectionLOS | 0 | 0 | This attribute indicates whether Section Loss of Signal is present at the OC3 Port. Default: off. |
| 1.3.6.1.4.1.1141.2.92.1.1.28 | hcxOc3PortSectionLOF | 0 | 0 | This attribute indicates whether Section Loss of Frame is present at the OC3 Port. Default: off. |
| 1.3.6.1.4.1.1141.2.92.1.1.29 | hcxOc3PortLineAIS | 0 | 0 | This attribute indicates whether Line Alarm Indication Signal is detected by the OC3 Port Default: off. |
| 1.3.6.1.4.1.1141.2.92.1.1.30 | hcxOc3PortLineRDI | 0 | 0 | This attribute indicates whether Line Remote Defect Indication is detected by the OC3 Port Default: off. |
| 1.3.6.1.4.1.1141.2.92.1.1.31 | hcxOc3PortPathRDI | 0 | 0 | This attribute indicates whether Path Remote Defect Indication is detected by the OC3 Port Default: off. |
| 1.3.6.1.4.1.1141.2.92.1.1.32 | hcxOc3PortAggrVoiceRate | 0 | 0 | This attribute specifies the aggregate Rate of all Voice Channels configured on this Port. A voice channel is considered configur… |
| 1.3.6.1.4.1.1141.2.92.1.1.33 | hcxOc3PortAggrActVoiceRate | 0 | 0 | This attribute specifies the aggregate Rate of all Voice Channels Active on this Port. A voice channel is considered Active on thi… |
| 1.3.6.1.4.1.1141.2.92.1.1.34 | hcxOc3PortLOFLed | 0 | 0 | The OC3 Loss Of Frame LED indicates whether a Loss of Frame is present on the WAN side of the OC3 port. |