The status of the T1 or E1 line. It is a bit map
represented as a sum and thus can indicate
multiple failures simultaneously. NoAlarm is set if and
only if no other flag is set. The bit positions are
defined as follows:
Bit Name Meaning PRD bit
___ __________________________ ____________________ __________________
1 NoAlarm No Alarm Present no equivalent
2 FarEndAlarm Far end sending AIS RemoteLossOfFA (7)
4 AlarmIndicationSignal Near end sending AIS IncomingAIS (1)
8 LossOfFrame Near end LOF LossOfFA (2)
16 LossOfSignal Near end LOS LIS(10)
32 LoopbackState Near end is looped CSULpbk/Pay Loop (9/14)...
64 T16AlarmIndicationSignal E1 Channel 16 AIS IncomingTS16AIS (3)
128 LossOfMultiFrame E1 Channel 16 LOF LossOfMFA (4)
256 DistantLossOfMultiFrame E1 far end LOF RemoteLossOfMFA (8)
512 DistantLossOfSignal E1 far end LOS ????
1024 BusiedOut Ds1 is busied-out BusiedOut (0)
2048 FailedState Ds1 is in failed st FailedState (5)
4096 FramingErrs FramingErrs (6)
8192 ErrRateExcessive Error rate > TBD ErrRateExceeded (11)
16384 RemoteErrRateExcessive Rem Error rate > TBD RemoteErrRateExceed (12)
Parsed from file NNCGNI00X5.mib.txt
Company: None
Module: NNCGNI00X5-MIB
Vendor: Newbridge Networks Corporation
Module: NNCGNI00X5-MIB
[Automatically extracted from oidview.com]
nncExtDs1LineStatus OBJECT-TYPE SYNTAX INTEGER (0..32767) ACCESS read-only STATUS mandatory DESCRIPTION "The status of the T1 or E1 line. It is a bit map represented as a sum and thus can indicate multiple failures simultaneously. NoAlarm is set if and only if no other flag is set. The bit positions are defined as follows: Bit Name Meaning PRD bit ___ __________________________ ____________________ __________________ 1 NoAlarm No Alarm Present no equivalent 2 FarEndAlarm Far end sending AIS RemoteLossOfFA (7) 4 AlarmIndicationSignal Near end sending AIS IncomingAIS (1) 8 LossOfFrame Near end LOF LossOfFA (2) 16 LossOfSignal Near end LOS LIS(10) 32 LoopbackState Near end is looped CSULpbk/Pay Loop (9/14)... 64 T16AlarmIndicationSignal E1 Channel 16 AIS IncomingTS16AIS (3) 128 LossOfMultiFrame E1 Channel 16 LOF LossOfMFA (4) 256 DistantLossOfMultiFrame E1 far end LOF RemoteLossOfMFA (8) 512 DistantLossOfSignal E1 far end LOS ???? 1024 BusiedOut Ds1 is busied-out BusiedOut (0) 2048 FailedState Ds1 is in failed st FailedState (5) 4096 FramingErrs FramingErrs (6) 8192 ErrRateExcessive Error rate > TBD ErrRateExceeded (11) 16384 RemoteErrRateExcessive Rem Error rate > TBD RemoteErrRateExceed (12)" ::= {nncExtDs1ConfigEntry 3}
nncExtDs1LineStatus OBJECT-TYPE SYNTAX INTEGER (0..32767) ACCESS read-only STATUS mandatory ::= {nncExtDs1ConfigEntry 3}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.123.3.10.1.1.1 | nncExtDs1ConfigIndex | 0 | 0 | The indentifier of a Ds1 line of interest, derived as for dsx1LineIndex. |
| 1.3.6.1.4.1.123.3.10.1.1.2 | nncExtDs1LineLength | 0 | 0 | The distance between the Ds1 interface and the CSU or repeater to which it is attached. Short is 0-100 feet, medium is 100-350 f… |
| 1.3.6.1.4.1.123.3.10.1.1.4 | nncExtDs1TrunkCondEnable | 0 | 0 | Which alarm conditions will cause trunk conditioning to be applied to the link. CondNever is set if and only if no other flag is… |
| 1.3.6.1.4.1.123.3.10.1.1.5 | nncExtDs1LossOfFrameConditioning | 0 | 0 | Whether or not to trunk condition on a loss of frame alarm. |
| 1.3.6.1.4.1.123.3.10.1.1.6 | nncExtDs1DistantLossOfFrameConditioning | 0 | 0 | Whether or not to trunk condition on a distant loss of frame alarm. |
| 1.3.6.1.4.1.123.3.10.1.1.7 | nncExtDs1FailedStateConditioning | 0 | 0 | Whether or not to trunk condition on a failed state alarm. |
| 1.3.6.1.4.1.123.3.10.1.1.8 | nncExtDs1ErrorRateConditioning | 0 | 0 | Whether or not to trunk condition on a failed state alarm. |
| 1.3.6.1.4.1.123.3.10.1.1.9 | nncExtDs1CSULoopbackConditioning | 0 | 0 | Whether or not to trunk condition on a CSU Loopback alarm. |
| 1.3.6.1.4.1.123.3.10.1.1.10 | nncExtDs1AlarmDeclareTime | 0 | 0 | The interval (in milliseconds) for which the local loss-of-frame condition is debounced. The debounce algorithm is as described … |
| 1.3.6.1.4.1.123.3.10.1.1.11 | nncExtDs1AlarmClearTime | 0 | 0 | The interval (in milliseconds) for which the reacquisition of local framing is debounced. The debounce algorithm is as described… |
| 1.3.6.1.4.1.123.3.10.1.1.12 | nncExtDs1UseCRCOnReframe | 0 | 0 | Whether or not the CRC is used when the specified DS1 link re-frames. This object is not valid for D4-framed T1 links. |
| 1.3.6.1.4.1.123.3.10.1.1.13 | nncExtDs1WorstInterval | 0 | 0 | The index into the interval table for the interval which has the TBD |
| 1.3.6.1.4.1.123.3.10.1.1.14 | nncExtDs1ErrorEvents | 0 | 0 | Then number of error events since the error event counter was last reset ?? |
| 1.3.6.1.4.1.123.3.10.1.1.15 | nncExtDs181XXCompatibility | 0 | 0 | Whether or not bit-level compatibility with an 81XX DS1 is enabled. This object is only meaningful if the DS1 is used for Nx64k … |
| 1.3.6.1.4.1.123.3.10.1.1.16 | nncExtDs1LoopbackConfig | 0 | 0 | The loopback which the 82X1 should be applying to the line. |
| 1.3.6.1.4.1.123.3.10.1.1.17 | nncExtDs1E1TrunkCondEnable | 0 | 0 | This object returns the same value as nncExtDs1TrunkCondEnable and is present for internal reasons |