This object contains circuit number, channel group number or
both for the Circuit Emulation endpoint. Used in CR to CE connections
when nncCrSpvccTargEpType is configured as circuitEmulation(3).
For CE connections on unchannelized DS3_CCE card, it's the circuit number
1-28 for UDT circuit number
For CE connections on unchannelized E3_CCE card, it's the circuit number
1-16 for UDT circuit number
For CE connections on E1/T1 CES, it's channel group number.
0 for UDT mode, both T1 and E1
1-31 for E1 in SDT mode
1-24 for T1 in SDT mode
For CE connections on channelized DS3_CCE-2 card, it's circuit number
and channel group number combined in the upper and lower byte.
circuitNum (bits 9-16, = 1 to 28 for channelized DS3,
= 0 for unstructured DS3)
channelGroupNum (bits 1-8, = 1 to 24 for SDT mode,
= 0 for UDT Mode)
For CE connections on channelized E3_CCE-2, it's circuit number and
channel group number combined in the upper and lower byte.
circuitNum (bits 9-16, = 1 to 16)
channelGroupNum (bits 1-8, = 1 to 31 for SDT mode,
= 0 for UDT Mode)
Example: Circuit Number = 7, Channel Group = 3 :
nncCrSpvccTargCeNumber = (Circuit Number * 256) +
Channel Group
= 1795
SPVCs across service types other than circuit emulation do not require
this object.
Parsed from file NncExtSPVC.mib.txt
Company: None
Module: NNCEXTSPVC-MIB
This object contains circuit number, channel group number or
both for the Circuit Emulation endpoint. Used in CR to CE connections
when nncCrSpvccTargEpType is configured as circuitEmulation(3).
For CE connections on unchannelized DS3_CCE card, it's the circuit number
1-28 for UDT circuit number
For CE connections on unchannelized E3_CCE card, it's the circuit number
1-16 for UDT circuit number
For CE connections on E1/T1 CES, it's channel group number.
0 for UDT mode, both T1 and E1
1-31 for E1 in SDT mode
1-24 for T1 in SDT mode
For CE connections on channelized DS3_CCE-2 card, it's circuit number
and channel group number combined in the upper and lower byte.
circuitNum (bits 9-16, = 1 to 28 for channelized DS3,
= 0 for unstructured DS3)
channelGroupNum (bits 1-8, = 1 to 24 for SDT mode,
= 0 for UDT Mode)
For CE connections on channelized E3_CCE-2, it's circuit number and
channel group number combined in the upper and lower byte.
circuitNum (bits 9-16, = 1 to 16)
channelGroupNum (bits 1-8, = 1 to 31 for SDT mode,
= 0 for UDT Mode)
Example: Circuit Number = 7, Channel Group = 3 :
nncCrSpvccTargCeNumber = (Circuit Number * 256) +
Channel Group
= 1795
SPVCs across service types other than circuit emulation do not require
this object.
Parsed from file NNCEXTSPVC-MIB.mib
Module: NNCEXTSPVC-MIB
Vendor: Newbridge Networks Corporation
Module: NNCEXTSPVC-MIB
[Automatically extracted from oidview.com]
nncCrSpvccTargCeNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains circuit number, channel group number or both for the Circuit Emulation endpoint. Used in CR to CE connections when nncCrSpvccTargEpType is configured as circuitEmulation(3). For CE connections on unchannelized DS3_CCE card, it's the circuit number 1-28 for UDT circuit number For CE connections on unchannelized E3_CCE card, it's the circuit number 1-16 for UDT circuit number For CE connections on E1/T1 CES, it's channel group number. 0 for UDT mode, both T1 and E1 1-31 for E1 in SDT mode 1-24 for T1 in SDT mode For CE connections on channelized DS3_CCE-2 card, it's circuit number and channel group number combined in the upper and lower byte. circuitNum (bits 9-16, = 1 to 28 for channelized DS3, = 0 for unstructured DS3) channelGroupNum (bits 1-8, = 1 to 24 for SDT mode, = 0 for UDT Mode) For CE connections on channelized E3_CCE-2, it's circuit number and channel group number combined in the upper and lower byte. circuitNum (bits 9-16, = 1 to 16) channelGroupNum (bits 1-8, = 1 to 31 for SDT mode, = 0 for UDT Mode) Example: Circuit Number = 7, Channel Group = 3 : nncCrSpvccTargCeNumber = (Circuit Number * 256) + Channel Group = 1795 SPVCs across service types other than circuit emulation do not require this object." DEFVAL { 1 } ::= { nncCrSpvccTableEntry 6 }
nncCrSpvccTargCeNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains circuit number, channel group number or both for the Circuit Emulation endpoint. Used in CR to CE connections when nncCrSpvccTargEpType is configured as circuitEmulation(3). For CE connections on unchannelized DS3_CCE card, it's the circuit number 1-28 for UDT circuit number For CE connections on unchannelized E3_CCE card, it's the circuit number 1-16 for UDT circuit number For CE connections on E1/T1 CES, it's channel group number. 0 for UDT mode, both T1 and E1 1-31 for E1 in SDT mode 1-24 for T1 in SDT mode For CE connections on channelized DS3_CCE-2 card, it's circuit number and channel group number combined in the upper and lower byte. circuitNum (bits 9-16, = 1 to 28 for channelized DS3, = 0 for unstructured DS3) channelGroupNum (bits 1-8, = 1 to 24 for SDT mode, = 0 for UDT Mode) For CE connections on channelized E3_CCE-2, it's circuit number and channel group number combined in the upper and lower byte. circuitNum (bits 9-16, = 1 to 16) channelGroupNum (bits 1-8, = 1 to 31 for SDT mode, = 0 for UDT Mode) Example: Circuit Number = 7, Channel Group = 3 : nncCrSpvccTargCeNumber = (Circuit Number * 256) + Channel Group = 1795 SPVCs across service types other than circuit emulation do not require this object." DEFVAL { 1 } ::= { nncCrSpvccTableEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.123.3.82.1.3.1.1 | nncCrSpvccServiceCategory | 0 | 0 | This object is used to set the traffic service category. This object is dependent on the value specified in nncCrSpvccTrafficDe… |
| 1.3.6.1.4.1.123.3.82.1.3.1.2 | nncCrSpvccTargEpAddr | 0 | 0 | This object is used to specify the AESA address for the target endpoint. The mapping scheme is as follows: Byte\Bit 8 … |
| 1.3.6.1.4.1.123.3.82.1.3.1.3 | nncCrSpvccTargVpi | 0 | 0 | This object contains the virtual path identifier (VPI) value for the target endpoint. Range: 0 - 4095 |
| 1.3.6.1.4.1.123.3.82.1.3.1.4 | nncCrSpvccTargVci | 0 | 0 | This object contains the virtual channel identifier (VCI) value for the target endpoint. Range: 1 - 65535 |
| 1.3.6.1.4.1.123.3.82.1.3.1.5 | nncCrSpvccTargDlci | 0 | 0 | This object contains the data link connection identifier for a frame relay endpoint. This number is used to identify the target… |
| 1.3.6.1.4.1.123.3.82.1.3.1.7 | nncCrSpvccTargEpType | 0 | 0 | This object specifies a target endpoint as one of the following types: cellRelay (1) frameRelay (2) circuitEmulation … |
| 1.3.6.1.4.1.123.3.82.1.3.1.8 | nncCrSpvccAdminStatus | 0 | 0 | This object accepts two values, enabled (1), and disabled (2). When the value is disabled, the SPVC is not connected. When enabl… |
| 1.3.6.1.4.1.123.3.82.1.3.1.9 | nncCrSpvccPriority | 0 | 0 | This object is used to set the priority for a SPVC connection request. It ranges between 1-16, with the following values: Best Pr… |
| 1.3.6.1.4.1.123.3.82.1.3.1.10 | nncCrSpvccMaxAdminWeight | 0 | 0 | This object is used to set a cost threshold for an SPVC connection. If the total cost of all VPCs exceeds this weight value for … |
| 1.3.6.1.4.1.123.3.82.1.3.1.11 | nncCrSpvccOperation | 0 | 0 | This object is used to request a reroute operation. Querying this object will not provide any useful information. |
| 1.3.6.1.4.1.123.3.82.1.3.1.12 | nncCrSpvccCallStatus | 0 | 0 | This read-only object is used to query the state of a particular SPVC. SPVCs that are connected and operational will return a va… |
| 1.3.6.1.4.1.123.3.82.1.3.1.13 | nncCrSpvccLocRerouteConfig | 0 | 0 | This object is used to configure the 'reroute on loss of continuity' feature using OAM-CC cells. It can be configured for eithe… |
| 1.3.6.1.4.1.123.3.82.1.3.1.14 | nncCrSpvccFwdAbrDynTrfcIcr | 0 | 0 | ABR dynamic traffic descriptor's Initial Cell Rate for the forward direction. Range: 0 - 2488320 Kb/s |
| 1.3.6.1.4.1.123.3.82.1.3.1.15 | nncCrSpvccFwdAbrDynTrfcRif | 0 | 0 | ABR traffic Rate Increase Factor for the forward direction. Value is expressed as the -power of 2. Range: 0 - 9 |
| 1.3.6.1.4.1.123.3.82.1.3.1.16 | nncCrSpvccFwdAbrDynTrfcRdf | 0 | 0 | ABR traffic Rate Decrease Factor descriptor for the forward direction. Value is expressed as the -power of 2 Range: 0 - 9 |
| 1.3.6.1.4.1.123.3.82.1.3.1.17 | nncCrSpvccBwdAbrDynTrfcIcr | 0 | 0 | ABR dynamic traffic descriptor's Initial Cell Rate for the destination endpoint. Range: 0 - 2488320 Kb/s |
| 1.3.6.1.4.1.123.3.82.1.3.1.18 | nncCrSpvccBwdAbrDynTrfcRif | 0 | 0 | ABR traffic Rate Increase Factor for the backward direction. Value is expressed as the -power of 2. Range: 0 - 9 |
| 1.3.6.1.4.1.123.3.82.1.3.1.19 | nncCrSpvccBwdAbrDynTrfcRdf | 0 | 0 | ABR traffic Rate Decrease Factor descriptor for the backward direction. Value is expressed as the -power of 2 Range: 0 - 9 |
| 1.3.6.1.4.1.123.3.82.1.3.1.20 | nncCrSpvccSrcBillingFlag | 0 | 0 | Billing Configuration for the source endpoint |
| 1.3.6.1.4.1.123.3.82.1.3.1.21 | nncCrSpvccFwdTmTrafficDescriptor | 0 | 0 | This object contains the traffic descriptor for the SPVC. Tag All (1) (UBR using 2k/12k fabric only) P_0+1 (2) (C… |
| 1.3.6.1.4.1.123.3.82.1.3.1.22 | nncCrSpvccFwdTmPolicingOption | 0 | 0 | Policing Option for an SPVCC. tag is supported only on rt-VBR/nrt-VBR connections that use the P_0+1/S_0 traffic descriptor |
| 1.3.6.1.4.1.123.3.82.1.3.1.23 | nncCrSpvccFwdTmBucketOneRate | 0 | 0 | This object is for peak cell rate (PCR), the cell rate which the source may never exceed. It is used to determine which cells ar… |
| 1.3.6.1.4.1.123.3.82.1.3.1.24 | nncCrSpvccFwdTmBucketOneCdvt | 0 | 0 | This object is used to set cell delay variation tolerance (CDVT) for one endpoint, measured in microseconds. Range: 1 - 190,000 m… |
| 1.3.6.1.4.1.123.3.82.1.3.1.25 | nncCrSpvccFwdTmBucketTwoRate | 0 | 0 | SIR_0p, SIR_0+1p or MIR_0+1p. This parameter holds the sustained information rate for VBR traffic, and the minimum information r… |
| 1.3.6.1.4.1.123.3.82.1.3.1.26 | nncCrSpvccFwdTmBucketTwoMbs | 0 | 0 | This object is for the maximum burst size, in cells, for SIR_0p or SIR_0+1p (nrtVbr and rtVbr only). Range: 1 - 10000 cells |
| 1.3.6.1.4.1.123.3.82.1.3.1.27 | nncCrSpvccFwdTmCdv | 0 | 0 | This value is to set the cell delay variation (CDV) between two endpoints to support the rt-VBR service category. Range: 250-1000… |
| 1.3.6.1.4.1.123.3.82.1.3.1.28 | nncCrSpvccFwdTmClr | 0 | 0 | The object is to set the cell loss ratio (CLR) between two SPVC endpoints when using the nrt-VBR service category. Value set as 1… |
| 1.3.6.1.4.1.123.3.82.1.3.1.29 | nncCrSpvccFwdTmFrameDiscard | 0 | 0 | The Frame (AAL protocol data unit) Discard option. When enabled, cells are discarded at the frame level by examining the SDU-ty… |
| 1.3.6.1.4.1.123.3.82.1.3.1.30 | nncCrSpvccBwdTmTrafficDescriptor | 0 | 0 | This object contains the traffic descriptor for the SPVC. Tag All (1) (UBR using 2k/12k fabric only) P_0+1 (2) (C… |
| 1.3.6.1.4.1.123.3.82.1.3.1.31 | nncCrSpvccBwdTmPolicingOption | 0 | 0 | Policing Option for an SPVCC. tag is supported only on rt-VBR/nrt-VBR connections that use the P_0+1/S_0 traffic descriptor |
| 1.3.6.1.4.1.123.3.82.1.3.1.32 | nncCrSpvccBwdTmBucketOneRate | 0 | 0 | This object is for peak cell rate (PCR), the cell rate which the source may never exceed. It is used to determine which cells ar… |
| 1.3.6.1.4.1.123.3.82.1.3.1.33 | nncCrSpvccBwdTmBucketOneCdvt | 0 | 0 | This object is used to set cell delay variation tolerance (CDVT) for one endpoint, measured in microseconds. Range: 1 - 190,000 m… |
| 1.3.6.1.4.1.123.3.82.1.3.1.34 | nncCrSpvccBwdTmBucketTwoRate | 0 | 0 | SIR_0p, SIR_0+1p or MIR_0+1p. This parameter holds the sustained information rate for VBR traffic, and the minimum information r… |
| 1.3.6.1.4.1.123.3.82.1.3.1.35 | nncCrSpvccBwdTmBucketTwoMbs | 0 | 0 | This object is for the maximum burst size, in cells, for SIR_0p or SIR_0+1p (nrt-VBR and rt-VBR only). Range: 1 - 10000 cells |
| 1.3.6.1.4.1.123.3.82.1.3.1.36 | nncCrSpvccBwdTmCdv | 0 | 0 | This value is to set the cell delay variation (CDV) between two endpoints to support the rt-VBR service category. Range: 250-1000… |
| 1.3.6.1.4.1.123.3.82.1.3.1.37 | nncCrSpvccBwdTmClr | 0 | 0 | The object is to set the cell loss ratio (CLR) between two SPVC endpoints when using the nrt-VBR service category. Value set as 1… |
| 1.3.6.1.4.1.123.3.82.1.3.1.38 | nncCrSpvccBwdTmFrameDiscard | 0 | 0 | The Frame (AAL protocol data unit) Discard option. When enabled, cells are discarded at the frame level by examining the SDU-ty… |
| 1.3.6.1.4.1.123.3.82.1.3.1.39 | nncCrSpvccFrBwdTmAr | 0 | 0 | This object is used to specify the Access Rate, in Kb/s. |
| 1.3.6.1.4.1.123.3.82.1.3.1.40 | nncCrSpvccFrBwdTmCir | 0 | 0 | The committed Information Rate, in Kb/s. |
| 1.3.6.1.4.1.123.3.82.1.3.1.41 | nncCrSpvccFrBwdTmBc | 0 | 0 | The Committed Burst Size, in Kb. |
| 1.3.6.1.4.1.123.3.82.1.3.1.42 | nncCrSpvccFrBwdTmBe | 0 | 0 | The Excess Burst Size, in Kb. |
| 1.3.6.1.4.1.123.3.82.1.3.1.43 | nncCrSpvccFrBwdTmIwf | 0 | 0 | Interworking Function. Values: none (None (FR Switching) = 0) networkInterworking (Network Interworking = 2)… |
| 1.3.6.1.4.1.123.3.82.1.3.1.44 | nncCrSpvccFrBwdTmPo | 0 | 0 | Policing |
| 1.3.6.1.4.1.123.3.82.1.3.1.45 | nncCrSpvccFrBwdTmPacing | 0 | 0 | Pacing |
| 1.3.6.1.4.1.123.3.82.1.3.1.46 | nncCrSpvccFrBwdTmPtclMapping | 0 | 0 | Protocol Mapping for Service Interworking SPVCs. If Translated Service Interworking is selected, the a profile must be set using … |
| 1.3.6.1.4.1.123.3.82.1.3.1.47 | nncCrSpvccFrBwdTmClpMapping | 0 | 0 | Cell Loss Priority Mapping. Values: cLPEqualsDE (CLP = DE, 0) cLPEquals0 (CLP = 0, 1 ) cLPEquals1 (CLP = 1, 2 ) |
| 1.3.6.1.4.1.123.3.82.1.3.1.48 | nncCrSpvccFrBwdTmDeMapping | 0 | 0 | Discard Eligibility Mapping Values: dEEqualsCLP (DE = CLP, 0) dESSCSor0 (Network Interworking: DE=FR_SSCS Service Interworking… |
| 1.3.6.1.4.1.123.3.82.1.3.1.49 | nncCrSpvccFrBwdTmEfciMapping | 0 | 0 | Explicit Forward Congestion Indication Mapping (Applies only to Service Interworking (IWF3), FR to ATM) Values: eFCIEqualsFECN (EF… |
| 1.3.6.1.4.1.123.3.82.1.3.1.50 | nncCrSpvccFrBwdTmPvcMgntProfile | 0 | 0 | Enables or disables the PVC Management Profile. When enabled, LMI is enabled on the network-side of the connection. Used only with… |
| 1.3.6.1.4.1.123.3.82.1.3.1.51 | nncCrSpvccFrBwdTmSIWProfile | 0 | 0 | The FR-CR profile index for service interworking connections. This attribute is used to define the translation profile to use whe… |
| 1.3.6.1.4.1.123.3.82.1.3.1.52 | nncCrSpvccCreator | 0 | 0 | The object retrieves the creator of a SPVC connection. |
| 1.3.6.1.4.1.123.3.82.1.3.1.53 | nncCrSpvccRowStatus | 0 | 0 | This object is used to control the status of a PDU and to query the status of an SPVC. When the RowStatus value is 'createAndWa… |