eqlGroupEnableLegacyCryptos OBJECT-TYPE
SYNTAX INTEGER {
enabled (0),
disabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This field specifies whether legacy crypto protocols should be enabled or not. This affects what protocols should be supported by applications such as SSH server, HTTPS server, LDAP client, SNMPv3 agent, etc."
DEFVAL { enabled }
View at oid-info.com
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.12740.1.1.1.1.1 | eqlGroupId | 0 | 0 | This index uniquely identifies the group. This index should always be 1. |
1.3.6.1.4.1.12740.1.1.1.1.2 | eqlGroupIsSingleSubnet | 0 | 0 | This field is used to indicate whether or not all the arrays within a group are located in the same subset. The default is singl… |
1.3.6.1.4.1.12740.1.1.1.1.3 | eqlGroupDefaultGatewayIpAddress | 0 | 0 | This field is used to indicate the default gatewayfor the group. This value can be overriden on a per array basis. This field con… |
1.3.6.1.4.1.12740.1.1.1.1.4 | eqlGroupDefaultMask | 0 | 0 | This field is used to indicate the default netmaskfor the group. This value can be overriden on a per array basis. This field ide… |
1.3.6.1.4.1.12740.1.1.1.1.5 | eqlGroupDefaultRoutingProtocol | 0 | 0 | This field is used to indicate the routing protocol use when a group spans multiple subnets. The support protocols are RIP and O… |
1.3.6.1.4.1.12740.1.1.1.1.6 | eqlGroupIsStorageOptimization | 0 | 0 | This field is used to indicate whether the Storage Pool is optimized for capacity (RAID 5/50) or performance (RAID 10). The defa… |
1.3.6.1.4.1.12740.1.1.1.1.7 | eqlGroupDiskAddWaitTime | 0 | 0 | This field is used to indicated how long to wait in minutes before including newly inserted drives into the RAID set. The delay … |
1.3.6.1.4.1.12740.1.1.1.1.8 | eqlGroupDefaultLanguage | 0 | 0 | This field is used to define the Locale the group will be running in. The default is ISO Latin 1. Need to create the enumerated … |
1.3.6.1.4.1.12740.1.1.1.1.9 | eqlGroupDefaultSnapshotSize | 0 | 0 | This field is used to specify by default what percentage of a volume is reserved for SnapShots. The default is 100%. It can be o… |
1.3.6.1.4.1.12740.1.1.1.1.10 | eqlGroupDefaultSnapshotWarningLevel | 0 | 0 | This field is used to specify by default when the administrator is warned that the space used for SnapShots close to being exhau… |
1.3.6.1.4.1.12740.1.1.1.1.11 | eqlGroupDefaultSnapshotDeletePolicy | 0 | 0 | This field specifies what should happen when the space reserved for SnapShots is exhuasted. The default is delete-oldest SnapSho… |
1.3.6.1.4.1.12740.1.1.1.1.13 | eqlGroupTimeZone | 0 | 0 | The field specifies the default timezone for the group HST (GMT-10:00) Hawaiian Standard Time: US/Hawaii, AST (GMT-09:00) Alaskan… |
1.3.6.1.4.1.12740.1.1.1.1.14 | eqlGroupLogLevel | 0 | 0 | This field specifies the loglevel for the group. The following levels are supported. The value of this object will be an OR of th… |
1.3.6.1.4.1.12740.1.1.1.1.15 | eqlGroupDescription | 0 | 0 | This field contains a use supplied description for the group. There is no default. |
1.3.6.1.4.1.12740.1.1.1.1.16 | eqlGroupIscsiNamePrefix | 0 | 0 | This field specifies the prefix for the iSCSI target names. The default is iqn.2001-04.com.equallogic. This can be overriden on … |
1.3.6.1.4.1.12740.1.1.1.1.17 | eqlGroupDefaultAliasToVolumeName | 0 | 0 | This field specifies whether or not to default the iSCSI alias to the name of the volume. This can be overriden on a per volume … |
1.3.6.1.4.1.12740.1.1.1.1.18 | eqlGroupEmailSrcDomain | 0 | 0 | This field specifies the SNMP domain name used in the FROM email address in generated email. e.g., everything after @ in foo@equ… |
1.3.6.1.4.1.12740.1.1.1.1.19 | eqlGroupName | 0 | 0 | This field specifies the Well Known Name for the group. It must be a name which is resolvable by DNS. There is no default for Gr… |
1.3.6.1.4.1.12740.1.1.1.1.20 | eqlGroupIpAddr | 0 | 0 | This field specifies the Well Known Address for the group. This is the IP address iSCSI Initiators will used to connect to the g… |
1.3.6.1.4.1.12740.1.1.1.1.21 | eqlGroupEnableWebAccessSSL | 0 | 0 | This field specifies whether or not allow web access to the group using https. The default is TRUE. |
1.3.6.1.4.1.12740.1.1.1.1.22 | eqlGroupEnableWebAccessUnsecure | 0 | 0 | This field specifies whether or not allow web access to the group using http. The default is TRUE. |
1.3.6.1.4.1.12740.1.1.1.1.23 | eqlGroupEnableCliAccessSSH | 0 | 0 | This field specifies whether or not allow ssh access to the group. The default is TRUE. |
1.3.6.1.4.1.12740.1.1.1.1.24 | eqlGroupEnableCliAccessUnsecure | 0 | 0 | This field specifies whether or not allow telnet access to the group. The default is FALSE. |
1.3.6.1.4.1.12740.1.1.1.1.25 | eqlGroupEnableEmailNotifications | 0 | 0 | This field is used to specify whether to notify administrators on alarms via email. The default is FALSE. |
1.3.6.1.4.1.12740.1.1.1.1.26 | eqlGroupEnableSNMPTraps | 0 | 0 | This field is used to specify whether to notify administrators on alarms via SNMP TRAPS. The default is FALSE. |
1.3.6.1.4.1.12740.1.1.1.1.27 | eqlGroupEnableSyslog | 0 | 0 | This field is used to specify whether to notify administrators on alarms via syslog. The default is FALSE. |
1.3.6.1.4.1.12740.1.1.1.1.28 | eqlGroupEmailPriorityMask | 0 | 0 | This field is used to configure the type of events to be sent in email notifications. The following type of events are supported… |
1.3.6.1.4.1.12740.1.1.1.1.29 | eqlGroupSNMPPriorityMask | 0 | 0 | This field is currently not being used. |
1.3.6.1.4.1.12740.1.1.1.1.30 | eqlGroupSysLogPriorityMask | 0 | 0 | This field is used to configure the type of events to be sent in syslog notifications. The following type of events are supporte… |
1.3.6.1.4.1.12740.1.1.1.1.31 | eqlGroupDefaultSite | 0 | 0 | This field specifies the site where the volume resides. Sites are defined on a per array basis. Sites are used to define where pr… |
1.3.6.1.4.1.12740.1.1.1.1.32 | eqlGroupPasswd1 | 0 | 0 | An octet string containing the password to authenticate members joining the group. If written, it changes the password for the acc… |
1.3.6.1.4.1.12740.1.1.1.1.33 | eqlGroupPasswd2 | 0 | 0 | Shouldn't be documented. or even here?JPMFIX |
1.3.6.1.4.1.12740.1.1.1.1.34 | eqlGroupRowStatus | 0 | 0 | Rowstatus |
1.3.6.1.4.1.12740.1.1.1.1.35 | eqlGroupObjectReuseScrub | 0 | 0 | If enabled, an object is zeroed out before reuse so that the new entity using the object will not be aware of the old contents … |
1.3.6.1.4.1.12740.1.1.1.1.36 | eqlGroupEnableSSH | 0 | 0 | This field specifies whether or not allow SSH access to the group. The default is TRUE. |
1.3.6.1.4.1.12740.1.1.1.1.37 | eqlGroupEnableTelnet | 0 | 0 | This field specifies whether or not allow telnet access to the group. The default is TRUE. |
1.3.6.1.4.1.12740.1.1.1.1.38 | eqlGroupEnableFTP | 0 | 0 | This field specifies whether or not allow ftp access to the group. The default is TRUE. |
1.3.6.1.4.1.12740.1.1.1.1.39 | eqlGroupEmailSrcUserName | 0 | 0 | This field specifies user portion of the FROM email address used in generated email. e.g., everything before @ in foo@equallogic… |
1.3.6.1.4.1.12740.1.1.1.1.40 | eqlGroupSyslogFacility | 0 | 0 | This field specifies the facility code which you would like applied to all eqllog messages that are targeted at syslog. |
1.3.6.1.4.1.12740.1.1.1.1.41 | eqlGroupEnableCLB | 0 | 0 | This field specifies whether or not turn on Connection Loand balancer. The default is TRUE. |
1.3.6.1.4.1.12740.1.1.1.1.42 | eqlGroupEnableVolBal | 0 | 0 | This field specifies whether or not turn on volume balancing. The default is TRUE. |
1.3.6.1.4.1.12740.1.1.1.1.43 | eqlGroupDiscoveryFilter | 0 | 0 | If set to true, the list of volumes returned during discovery is filtered based on chap configuration in volume ACLs. The default… |
1.3.6.1.4.1.12740.1.1.1.1.44 | eqlGroupEmailSupportContact | 0 | 0 | This field specifies the customer email address for support to contact in the event of a system failure. Configuring this field … |
1.3.6.1.4.1.12740.1.1.1.1.45 | eqlGroupReplicationWindowSize | 0 | 0 | This field specifies the receiving window size of the tcp connection established to secondary site during replication data trans… |
1.3.6.1.4.1.12740.1.1.1.1.46 | eqlGroupConfigurationFlags | 0 | 0 | This field defines the common place holder for group wide configuration flag. The flags must be of type enable(1) or disable(0).… |
1.3.6.1.4.1.12740.1.1.1.1.47 | eqlGroupISCSIPortalGrpTag | 0 | 0 | A flag used internally by the iSCSI subsystem to determine the upgrade history of this storage group and infer the default iSCSI… |
1.3.6.1.4.1.12740.1.1.1.1.48 | eqlGroupMaxConcurrentReplicas | 0 | 0 | This field specifies the maximum number of replications that are transferring data at one time. The minimum value is 1, the max… |
1.3.6.1.4.1.12740.1.1.1.1.49 | eqlGroupDefaultThinWarn | 0 | 0 | The default eqliscsiVolumeThinWarnPercentage value used when creating thin provisoned volumes. |
1.3.6.1.4.1.12740.1.1.1.1.50 | eqlGroupDefaultThinMaxGrow | 0 | 0 | The default eqliscsiVolumeThinMaxGrowPercentage value used when creating thin provisoned volumes. |
1.3.6.1.4.1.12740.1.1.1.1.51 | eqlGroupDefaultMgmtGatewayIpAddressType | 0 | 0 | eqlGroupDefaultMgmtGatewayIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Th… |
1.3.6.1.4.1.12740.1.1.1.1.52 | eqlGroupDefaultMgmtGatewayIpAddress | 0 | 0 | eqlGroupDefaultMgmtGatewayIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This field… |
1.3.6.1.4.1.12740.1.1.1.1.53 | eqlGroupInet6AddrType | 0 | 0 | eqlGroupInet6AddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifies… |
1.3.6.1.4.1.12740.1.1.1.1.54 | eqlGroupInet6Addr | 0 | 0 | eqlGroupInet6Addr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifies the IPv… |
1.3.6.1.4.1.12740.1.1.1.1.55 | eqlGroupInetAddrType | 0 | 0 | eqlGroupInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifies … |
1.3.6.1.4.1.12740.1.1.1.1.56 | eqlGroupInetAddr | 0 | 0 | eqlGroupInetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifies the IPv4… |
1.3.6.1.4.1.12740.1.1.1.1.57 | eqlGroupSupportSlowSwitch | 0 | 0 | eqlGroupSupportSlowSwitch OBJECT-TYPE SYNTAX INTEGER { off (0), automatic (1), on (2) } MAX-ACCESS read-write STATUS current DE… |
1.3.6.1.4.1.12740.1.1.1.1.58 | eqlGroupProfileIndex | 0 | 0 | eqlGroupProfileIndex OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This field r… |
1.3.6.1.4.1.12740.1.1.1.1.59 | eqlGroupEnableSSHProtocolV1 | 0 | 0 | eqlGroupEnableSSHProtocolV1 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifie… |
1.3.6.1.4.1.12740.1.1.1.1.60 | eqlGroupEnableStandbyButton | 0 | 0 | eqlGroupEnableStandbyButton OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifie… |
1.3.6.1.4.1.12740.1.1.1.1.61 | eqlGroupLDAPLoginAuthEnable | 0 | 0 | eqlGroupLDAPLoginAuthEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This field enables … |
1.3.6.1.4.1.12740.1.1.1.1.62 | eqlGroupApplianceDiscovery | 0 | 0 | eqlGroupApplianceDiscovery OBJECT-TYPE SYNTAX INTEGER { discover (0) } MAX-ACCESS read-write STATUS current DESCRIPTION "" DEFV… |
1.3.6.1.4.1.12740.1.1.1.1.63 | eqlGroupDefaultDcbVlanId | 0 | 0 | eqlGroupDefaultDcbVlanId OBJECT-TYPE SYNTAX Unsigned32(0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "Default VLAN … |
1.3.6.1.4.1.12740.1.1.1.1.64 | eqlGroupThermalShutdownOverride | 0 | 0 | eqlGroupThermalShutdownOverride OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current D… |
1.3.6.1.4.1.12740.1.1.1.1.66 | eqlGroupMaxReplSegments | 0 | 0 | eqlGroupMaxReplSegments OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifies the… |
1.3.6.1.4.1.12740.1.1.1.1.67 | eqlGroupEnableVolumeRecovery | 0 | 0 | eqlGroupEnableVolumeRecovery OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifi… |
1.3.6.1.4.1.12740.1.1.1.1.68 | eqlGroupSessionIdleTimeout | 0 | 0 | eqlGroupSessionIdleTimeout OBJECT-TYPE SYNTAX Integer32(1..1440) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTI… |
1.3.6.1.4.1.12740.1.1.1.1.69 | eqlGroupSessionIdleTimeoutEnable | 0 | 0 | eqlGroupSessionIdleTimeoutEnable OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current … |
1.3.6.1.4.1.12740.1.1.1.1.70 | eqlGroupSessionBannerEnable | 0 | 0 | eqlGroupSessionBannerEnable OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current DESCR… |
1.3.6.1.4.1.12740.1.1.1.1.71 | eqlGroupDefaultVolSnapshotBorrowEnabled | 0 | 0 | eqlGroupDefaultVolSnapshotBorrowEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This fi… |
1.3.6.1.4.1.12740.1.1.1.1.72 | eqlGroupRecoveryLifeTimeEnable | 0 | 0 | eqlGroupRecoveryLifeTimeEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This field enabl… |
1.3.6.1.4.1.12740.1.1.1.1.73 | eqlGroupRecoveryLifeTime | 0 | 0 | eqlGroupRecoveryLifeTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field defines the … |
1.3.6.1.4.1.12740.1.1.1.1.74 | eqlGroupTimeProtocol | 0 | 0 | eqlGroupTimeProtocol OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifies the acti… |
1.3.6.1.4.1.12740.1.1.1.1.75 | eqlGroupRecoveryTrimmerFreq | 0 | 0 | eqlGroupRecoveryTrimmerFreq OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field defines t… |
1.3.6.1.4.1.12740.1.1.1.1.76 | eqlGroupUpdateEnable | 0 | 0 | eqlGroupUpdateEnable OBJECT-TYPE SYNTAX INTEGER { enabled (0), disabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION … |
1.3.6.1.4.1.12740.1.1.1.1.77 | eqlGroupUpdateLast | 0 | 0 | eqlGroupUpdateLast OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The time of last update perf… |
1.3.6.1.4.1.12740.1.1.1.1.78 | eqlGroupDefaultSectorSize | 0 | 0 | eqlGroupDefaultSectorSize OBJECT-TYPE SYNTAX INTEGER { sector-size-512-bytes(0), sector-size-4096-bytes(1) } MAX-ACCESS read-cr… |
1.3.6.1.4.1.12740.1.1.1.1.80 | eqlGroupCompressionScanFreq | 0 | 0 | eqlGroupCompressionScanFreq OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This index is the la… |
1.3.6.1.4.1.12740.1.1.1.1.81 | eqlGroupRunCompressionScan | 0 | 0 | eqlGroupRunCompressionScan OBJECT-TYPE SYNTAX INTEGER { enabled (0), disabled(1) } MAX-ACCESS read-write STATUS current DESCRIP… |
1.3.6.1.4.1.12740.1.1.1.1.82 | eqlGroupMonitorReminderTimestamp | 0 | 0 | eqlGroupMonitorReminderTimestamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "UTC timestamp … |