AP Model
Parsed from file AIRESPACE-WIRELESS-MIB.mib
Module: AIRESPACE-WIRELESS-MIB
AP Model
AP Model
Parsed from file AIRESPACE-WIRELESS-MIB.my.txt
Company: None
Module: AIRESPACE-WIRELESS-MIB
AP Model
bsnAPModel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "AP Model" ::= { bsnAPEntry 16 }
bsnAPModel OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "AP Model" ::= { bsnAPEntry 16 }
Vendor: Airespace, Inc (formerly Black Storm Networks)
Module: AIRESPACE-WIRELESS-MIB
[Automatically extracted from oidview.com]
bsnAPModel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "AP Model" ::= { bsnAPEntry 16 }
bsnAPModel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "AP Model" ::= { bsnAPEntry 16 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.14179.2.2.1.1.1 | bsnAPDot3MacAddress | 0 | 0 | The MAC address of an AP. |
| 1.3.6.1.4.1.14179.2.2.1.1.2 | bsnAPNumOfSlots | 0 | 0 | Number of Radio Interfaces on the Airespace AP. Currently maximum two interfaces are supported. One would be of type 802.11a and … |
| 1.3.6.1.4.1.14179.2.2.1.1.3 | bsnAPName | 0 | 0 | Name assigned to this AP. If an AP is not configured its factory default name will be ap: |
| 1.3.6.1.4.1.14179.2.2.1.1.4 | bsnAPLocation | 0 | 0 | User specified location of this AP. While configuring AP, user should specify a location for the AP so that its easy to figure ou… |
| 1.3.6.1.4.1.14179.2.2.1.1.5 | bsnAPMonitorOnlyMode | 0 | 0 | Monitor Only Mode Setting. |
| 1.3.6.1.4.1.14179.2.2.1.1.6 | bsnAPOperationStatus | 0 | 0 | Operation State of the AP. When AP associates with the Airespace Switch its state will be associated. When Airespace AP is disass… |
| 1.3.6.1.4.1.14179.2.2.1.1.8 | bsnAPSoftwareVersion | 0 | 0 | Major Minor Software Version of AP |
| 1.3.6.1.4.1.14179.2.2.1.1.9 | bsnAPBootVersion | 0 | 0 | Major Minor Boot Version of AP |
| 1.3.6.1.4.1.14179.2.2.1.1.10 | bsnAPPrimaryMwarName | 0 | 0 | sysName of the Airespace Switch which is suppose to be the Primary MWAR(switch) of the AP with which AP should associate. This wo… |
| 1.3.6.1.4.1.14179.2.2.1.1.11 | bsnAPReset | 0 | 0 | Set this attribute to reset the AP. When it comes up it will try to associate with the Primary Switch if that is set, else it wil… |
| 1.3.6.1.4.1.14179.2.2.1.1.12 | bsnAPStatsTimer | 0 | 0 | Configures the time interval in secs after which bsnAPDot11Counters Stats is sent from AP to Switch. If not configured this value… |
| 1.3.6.1.4.1.14179.2.2.1.1.13 | bsnAPPortNumber | 0 | 0 | Port on the Switch on which this APs traffic is coming through. |
| 1.3.6.1.4.1.14179.2.2.1.1.17 | bsnAPSerialNumber | 0 | 0 | AP Serial Number. |
| 1.3.6.1.4.1.14179.2.2.1.1.18 | bsnAPClearConfig | 0 | 0 | Set this attribute to clear AP configuration and reset it to factory defaults. Reading this attribute will always return 0 |
| 1.3.6.1.4.1.14179.2.2.1.1.19 | bsnApIpAddress | 0 | 0 | IP address of the AP. This will not be available when the switch is operating in the Layer2 mode. In this case, the attribute wil… |
| 1.3.6.1.4.1.14179.2.2.1.1.20 | bsnAPMirrorMode | 0 | 0 | If enabled, then this AP's Client's Data is mirrored and this AP's clients are dynamically added to the switch's mirrored MAC lis… |
| 1.3.6.1.4.1.14179.2.2.1.1.21 | bsnAPRemoteModeSupport | 0 | 0 | This specifies if the the Remote Mode is supported on this AP or not. If supported user can set bsnAPMonitorOnlyMode to remote. O… |
| 1.3.6.1.4.1.14179.2.2.1.1.22 | bsnAPType | 0 | 0 | This is the model of the AP in enumeration. |
| 1.3.6.1.4.1.14179.2.2.1.1.23 | bsnAPSecondaryMwarName | 0 | 0 | sysName of the Airespace Switch which is suppose to be the Secondary MWAR(switch) of the AP with which AP should associate if Pri… |
| 1.3.6.1.4.1.14179.2.2.1.1.24 | bsnAPTertiaryMwarName | 0 | 0 | sysName of the Airespace Switch which is suppose to be the Tertiary MWAR(switch) of the AP with which AP should associate. If pri… |
| 1.3.6.1.4.1.14179.2.2.1.1.25 | bsnAPIsStaticIP | 0 | 0 | This flag when disabled implies that AP will use DHCP to get the IP address. However, if it is enabled, then user should enter … |
| 1.3.6.1.4.1.14179.2.2.1.1.26 | bsnAPNetmask | 0 | 0 | The Netmask of the IP address of the AP. |
| 1.3.6.1.4.1.14179.2.2.1.1.27 | bsnAPGateway | 0 | 0 | The Gateway for the AP. |
| 1.3.6.1.4.1.14179.2.2.1.1.28 | bsnAPStaticIPAddress | 0 | 0 | The Static IP-Address configuration for the AP. This can only be changed when the LWAPP mode is in Layer-3. |
| 1.3.6.1.4.1.14179.2.2.1.1.29 | bsnAPBridgingSupport | 0 | 0 | This specifies if this AP is a Bridging AP. Bridging APs can be used in Bridging or Mesh network configurations. |
| 1.3.6.1.4.1.14179.2.2.1.1.30 | bsnAPGroupVlanName | 0 | 0 | The AP Group to which this AP has been associated with. If it is empty, then no AP Group overriding has been set. |
| 1.3.6.1.4.1.14179.2.2.1.1.31 | bsnAPIOSVersion | 0 | 0 | IOS Version of IOS Cisco AP. Zero length string will be returned for other APs |
| 1.3.6.1.4.1.14179.2.2.1.1.32 | bsnAPCertificateType | 0 | 0 | Enum values denoting AP Certificate Type. 1 : manufactureinstalled : Manufacture Installed Certificate type (MIC). 2 : selfsigned … |
| 1.3.6.1.4.1.14179.2.2.1.1.33 | bsnAPEthernetMacAddress | 0 | 0 | The Ethernet MAC address of the AP. |
| 1.3.6.1.4.1.14179.2.2.1.1.37 | bsnAPAdminStatus | 0 | 0 | Admin State of the AP |