IOS Version of IOS Cisco AP. Zero length string will be
returned for other APs
Parsed from file AIRESPACE-WIRELESS-MIB.mib
Module: AIRESPACE-WIRELESS-MIB
IOS Version of IOS Cisco AP. Zero length string will be
returned for other APs
IOS Version of IOS Cisco AP. Zero length string will be
returned for other APs
Parsed from file AIRESPACE-WIRELESS-MIB.my.txt
Company: None
Module: AIRESPACE-WIRELESS-MIB
IOS Version of IOS Cisco AP. Zero length string will be
returned for other APs
bsnAPIOSVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "IOS Version of IOS Cisco AP. Zero length string will be returned for other APs" ::= { bsnAPEntry 31 }
bsnAPIOSVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "IOS Version of IOS Cisco AP. Zero length string will be returned for other APs" ::= { bsnAPEntry 31 }
Vendor: Airespace, Inc (formerly Black Storm Networks)
Module: AIRESPACE-WIRELESS-MIB
[Automatically extracted from oidview.com]
bsnAPIOSVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "IOS Version of IOS Cisco AP. Zero length string will be returned for other APs" ::= { bsnAPEntry 31 }
bsnAPIOSVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "IOS Version of IOS Cisco AP. Zero length string will be returned for other APs" ::= { bsnAPEntry 31 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.14179.2.2.1.1.1 | bsnAPDot3MacAddress | 0 | 0 | The MAC address of an AP. |
| 1.3.6.1.4.1.14179.2.2.1.1.2 | bsnAPNumOfSlots | 0 | 0 | Number of Radio Interfaces on the Airespace AP. Currently maximum two interfaces are supported. One would be of type 802.11a and … |
| 1.3.6.1.4.1.14179.2.2.1.1.3 | bsnAPName | 0 | 0 | Name assigned to this AP. If an AP is not configured its factory default name will be ap: |
| 1.3.6.1.4.1.14179.2.2.1.1.4 | bsnAPLocation | 0 | 0 | User specified location of this AP. While configuring AP, user should specify a location for the AP so that its easy to figure ou… |
| 1.3.6.1.4.1.14179.2.2.1.1.5 | bsnAPMonitorOnlyMode | 0 | 0 | Monitor Only Mode Setting. |
| 1.3.6.1.4.1.14179.2.2.1.1.6 | bsnAPOperationStatus | 0 | 0 | Operation State of the AP. When AP associates with the Airespace Switch its state will be associated. When Airespace AP is disass… |
| 1.3.6.1.4.1.14179.2.2.1.1.8 | bsnAPSoftwareVersion | 0 | 0 | Major Minor Software Version of AP |
| 1.3.6.1.4.1.14179.2.2.1.1.9 | bsnAPBootVersion | 0 | 0 | Major Minor Boot Version of AP |
| 1.3.6.1.4.1.14179.2.2.1.1.10 | bsnAPPrimaryMwarName | 0 | 0 | sysName of the Airespace Switch which is suppose to be the Primary MWAR(switch) of the AP with which AP should associate. This wo… |
| 1.3.6.1.4.1.14179.2.2.1.1.11 | bsnAPReset | 0 | 0 | Set this attribute to reset the AP. When it comes up it will try to associate with the Primary Switch if that is set, else it wil… |
| 1.3.6.1.4.1.14179.2.2.1.1.12 | bsnAPStatsTimer | 0 | 0 | Configures the time interval in secs after which bsnAPDot11Counters Stats is sent from AP to Switch. If not configured this value… |
| 1.3.6.1.4.1.14179.2.2.1.1.13 | bsnAPPortNumber | 0 | 0 | Port on the Switch on which this APs traffic is coming through. |
| 1.3.6.1.4.1.14179.2.2.1.1.16 | bsnAPModel | 0 | 0 | AP Model |
| 1.3.6.1.4.1.14179.2.2.1.1.17 | bsnAPSerialNumber | 0 | 0 | AP Serial Number. |
| 1.3.6.1.4.1.14179.2.2.1.1.18 | bsnAPClearConfig | 0 | 0 | Set this attribute to clear AP configuration and reset it to factory defaults. Reading this attribute will always return 0 |
| 1.3.6.1.4.1.14179.2.2.1.1.19 | bsnApIpAddress | 0 | 0 | IP address of the AP. This will not be available when the switch is operating in the Layer2 mode. In this case, the attribute wil… |
| 1.3.6.1.4.1.14179.2.2.1.1.20 | bsnAPMirrorMode | 0 | 0 | If enabled, then this AP's Client's Data is mirrored and this AP's clients are dynamically added to the switch's mirrored MAC lis… |
| 1.3.6.1.4.1.14179.2.2.1.1.21 | bsnAPRemoteModeSupport | 0 | 0 | This specifies if the the Remote Mode is supported on this AP or not. If supported user can set bsnAPMonitorOnlyMode to remote. O… |
| 1.3.6.1.4.1.14179.2.2.1.1.22 | bsnAPType | 0 | 0 | This is the model of the AP in enumeration. |
| 1.3.6.1.4.1.14179.2.2.1.1.23 | bsnAPSecondaryMwarName | 0 | 0 | sysName of the Airespace Switch which is suppose to be the Secondary MWAR(switch) of the AP with which AP should associate if Pri… |
| 1.3.6.1.4.1.14179.2.2.1.1.24 | bsnAPTertiaryMwarName | 0 | 0 | sysName of the Airespace Switch which is suppose to be the Tertiary MWAR(switch) of the AP with which AP should associate. If pri… |
| 1.3.6.1.4.1.14179.2.2.1.1.25 | bsnAPIsStaticIP | 0 | 0 | This flag when disabled implies that AP will use DHCP to get the IP address. However, if it is enabled, then user should enter … |
| 1.3.6.1.4.1.14179.2.2.1.1.26 | bsnAPNetmask | 0 | 0 | The Netmask of the IP address of the AP. |
| 1.3.6.1.4.1.14179.2.2.1.1.27 | bsnAPGateway | 0 | 0 | The Gateway for the AP. |
| 1.3.6.1.4.1.14179.2.2.1.1.28 | bsnAPStaticIPAddress | 0 | 0 | The Static IP-Address configuration for the AP. This can only be changed when the LWAPP mode is in Layer-3. |
| 1.3.6.1.4.1.14179.2.2.1.1.29 | bsnAPBridgingSupport | 0 | 0 | This specifies if this AP is a Bridging AP. Bridging APs can be used in Bridging or Mesh network configurations. |
| 1.3.6.1.4.1.14179.2.2.1.1.30 | bsnAPGroupVlanName | 0 | 0 | The AP Group to which this AP has been associated with. If it is empty, then no AP Group overriding has been set. |
| 1.3.6.1.4.1.14179.2.2.1.1.32 | bsnAPCertificateType | 0 | 0 | Enum values denoting AP Certificate Type. 1 : manufactureinstalled : Manufacture Installed Certificate type (MIC). 2 : selfsigned … |
| 1.3.6.1.4.1.14179.2.2.1.1.33 | bsnAPEthernetMacAddress | 0 | 0 | The Ethernet MAC address of the AP. |
| 1.3.6.1.4.1.14179.2.2.1.1.37 | bsnAPAdminStatus | 0 | 0 | Admin State of the AP |