bsnGlobalDot11Config OBJECT IDENTIFIER ::= {bsnGlobalDot11 1}
bsnGlobalDot11Config OBJECT IDENTIFIER ::= { bsnGlobalDot11 1 }
Vendor: Airespace, Inc (formerly Black Storm Networks)
Module: AIRESPACE-WIRELESS-MIB
[Automatically extracted from oidview.com]
bsnGlobalDot11Config OBJECT IDENTIFIER ::= { bsnGlobalDot11 1 }
bsnGlobalDot11Config OBJECT IDENTIFIER ::= { bsnGlobalDot11 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.14179.2.3.1.1 | bsnGlobalDot11PrivacyOptionImplemented | 1 | 1 | This attribute, when true, shall indicate that the IEEE 802.11 WEP option is implemented. The default value of this attribute sh… |
1.3.6.1.4.1.14179.2.3.1.2 | bsnGlobalDot11AuthenticationResponseTimeOut | 1 | 1 | This attribute shall specify the number of TU that a responding STA should wait for the next frame in the authentication sequence. |
1.3.6.1.4.1.14179.2.3.1.3 | bsnGlobalDot11MultiDomainCapabilityImplemented | 1 | 1 | This attribute, when TRUE, indicates that the station implementation is capable of supporting multiple regulatory domains. The c… |
1.3.6.1.4.1.14179.2.3.1.4 | bsnGlobalDot11MultiDomainCapabilityEnabled | 1 | 1 | This attribute, when TRUE, indicates that the capability of the station to operate in multiple regulatory domains is enabled. Th… |
1.3.6.1.4.1.14179.2.3.1.5 | bsnGlobalDot11CountryIndex | 1 | 1 | This attribute identifies the country in which the station is operating. |
1.3.6.1.4.1.14179.2.3.1.6 | bsnGlobalDot11LoadBalancing | 1 | 1 | This attribute specifies if load balancing of clients is enabled on disabled. |
1.3.6.1.4.1.14179.2.3.1.7 | bsnGlobalDot11RogueTimer | 1 | 1 | This attribute specifies in seconds, the time interval after which a Rogue Entry in Rogue Table will expire if no beacon is heard… |
1.3.6.1.4.1.14179.2.3.1.8 | bsnPrimaryMwarForAPs | 1 | 1 | This attribute specifies if this Switch acts a Master Switch for the Airespace APs. So if an Airespace AP doesn't find its Primar… |
1.3.6.1.4.1.14179.2.3.1.9 | bsnRtpProtocolPriority | 1 | 1 | Real Time Protocol Priority. |
1.3.6.1.4.1.14179.2.3.1.10 | bsnSystemCurrentTime | 1 | 1 | This attribute will display the Current System time on the Switch. |
1.3.6.1.4.1.14179.2.3.1.11 | bsnUpdateSystemTime | 1 | 1 | Use this attribute to change the System time on the Switch. Specify the new time in this Format MM/DD/YYYY HH:MM:SS |
1.3.6.1.4.1.14179.2.3.1.12 | bsnOperatingTemperatureEnvironment | 1 | 1 | Operating Environment of the Airespace Switch. commercial is Commercial (0 to 40 C) and industrial is Industrial (-10 to 70 C) |
1.3.6.1.4.1.14179.2.3.1.13 | bsnSensorTemperature | 1 | 1 | Current Internal Temperature of the unit in Centigrade |
1.3.6.1.4.1.14179.2.3.1.14 | bsnTemperatureAlarmLowLimit | 1 | 1 | Internal Temperature Alarm Low Limit in Centigrade. If the bsnSensorTemperature goes below this limit bsnSensedTemperatureTooLow … |
1.3.6.1.4.1.14179.2.3.1.15 | bsnTemperatureAlarmHighLimit | 1 | 1 | Internal Temperature Alarm High Limit in Centigrade. If the bsnSensorTemperature goes above this limit bsnSensedTemperatureTooHig… |
1.3.6.1.4.1.14179.2.3.1.16 | bsnVirtualGatewayAddress | 1 | 1 | Virtual Gateway Address of the Switch. This is used by web auth and Ipsec. If the virtual IP Address is changed, the Switch has t… |
1.3.6.1.4.1.14179.2.3.1.17 | bsnRFMobilityDomainName | 1 | 1 | RF Mobility Group Name to which this Airespace Switch belongs. Airespace Switches on a network form a RF Group as well as a Mobil… |
1.3.6.1.4.1.14179.2.3.1.18 | bsnClientWatchListFeature | 1 | 1 | This flag should be turned on for the client watch lists to be enabled on the switch. When enabled, the switch generates Client A… |
1.3.6.1.4.1.14179.2.3.1.19 | bsnRogueLocationDiscoveryProtocol | 1 | 1 | This flag should be turned on to enable the Rogue Location Discovery Protocol feature on the switch. |
1.3.6.1.4.1.14179.2.3.1.20 | bsnRogueAutoContainFeature | 1 | 1 | This flag should be turned on to allow the switch to contain the rogues automatically if detected on the wired network. |
1.3.6.1.4.1.14179.2.3.1.21 | bsnOverAirProvisionApMode | 1 | 1 | Over the Air Provisioning Mode for APs |
1.3.6.1.4.1.14179.2.3.1.22 | bsnMaximumNumberOfConcurrentLogins | 1 | 1 | This attribute specifies the maximum number of concurrent logins that the switch will allow for a single user. A value 0 implies … |
1.3.6.1.4.1.14179.2.3.1.23 | bsnAutoContainRoguesAdvertisingSsid | 1 | 1 | This flag should be set to 1 to allow the switch to contain automatically those rogues that are advertising our SSID. If value is… |
1.3.6.1.4.1.14179.2.3.1.24 | bsnAutoContainAdhocNetworks | 1 | 1 | This flag should be set to 1 to allow the switch to contain automatically the adhoc networks detected by the switch. If value is … |
1.3.6.1.4.1.14179.2.3.1.25 | bsnAutoContainTrustedClientsOnRogueAps | 1 | 1 | This flag should be set to 1 to allow the switch to contain automatically those trusted clients that are associated to rogue APs.… |
1.3.6.1.4.1.14179.2.3.1.26 | bsnValidateRogueClientsAgainstAAA | 1 | 1 | This flag should be turned on to allow the switch to validate 'valid' mobiles associating with rogue APs. For example, if a clien… |
1.3.6.1.4.1.14179.2.3.1.27 | bsnSystemTimezoneDelta | 1 | 1 | The delta (difference) between the local time and the Universal Coordinated Time in hours. For example, it is -8 for the PST and … |
1.3.6.1.4.1.14179.2.3.1.28 | bsnSystemTimezoneDaylightSavings | 1 | 1 | This flag specifies if daylight savings are enabled for the current timezone. |
1.3.6.1.4.1.14179.2.3.1.29 | bsnAllowAuthorizeApAgainstAAA | 1 | 1 | This flag specifies if LWAPP is allowed to get authorization via RADIUS or local database for an AP. |
1.3.6.1.4.1.14179.2.3.1.30 | bsnSystemTimezoneDeltaMinutes | 1 | 1 | The minutes component of delta (difference) between the local time and the Universal Coordinated Time. |
1.3.6.1.4.1.14179.2.3.1.31 | bsnApFallbackEnabled | 1 | 1 | This flag specifies if the APs should continue LWAPP discoveries to fallback to the primary switch in case they are not already a… |
1.3.6.1.4.1.14179.2.3.1.32 | bsnAppleTalkEnabled | 1 | 1 | This flag turns on the appletalk bridging in the switch such that the packets from Apple clients that use appletalk format can be… |
1.3.6.1.4.1.14179.2.3.1.40 | bsnTrustedApPolicyConfig | 8 | 16 | None |
1.3.6.1.4.1.14179.2.3.1.41 | bsnClientExclusionPolicyConfig | 6 | 12 | None |
1.3.6.1.4.1.14179.2.3.1.42 | bsnSignatureConfig | 5 | 52 | None |
1.3.6.1.4.1.14179.2.3.1.43 | bsnRfIdTagConfig | 3 | 6 | None |
1.3.6.1.4.1.14179.2.3.1.44 | bsnAPNeighborAuthConfig | 2 | 4 | None |
1.3.6.1.4.1.14179.2.3.1.45 | bsnRFNetworkName | 1 | 1 | RF Network Group Name to which this Airespace Switch belongs. Airespace Switches on a network form a RF Network Group as well as … |
1.3.6.1.4.1.14179.2.3.1.46 | bsnFastSSIDChangeFeature | 1 | 1 | Configures Fast SSID changing feature for mobile-stations. When enabled, permits mobile-stations to change SSIDs without having t… |
1.3.6.1.4.1.14179.2.3.1.47 | bsnBridgingPolicyConfig | 2 | 4 | None |
1.3.6.1.4.1.14179.2.3.1.48 | bsnAcceptSelfSignedCertificate | 1 | 1 | This flag specifies if controller will accept Self Signed Certificate from AP as part of authorization. |
1.3.6.1.4.1.14179.2.3.1.49 | bsnSystemClockTime | 1 | 1 | This object represents the current clock time of the controller and expressed as the number of seconds elapsed since 00:00:00 on J… |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.14179.2.3.2 | bsnGlobalDot11b | 2 | 108 | None |
1.3.6.1.4.1.14179.2.3.3 | bsnGlobalDot11a | 2 | 98 | None |
1.3.6.1.4.1.14179.2.3.4 | bsnGlobalDot11h | 1 | 7 | None |