Internal Temperature Alarm High Limit in Centigrade. If the
bsnSensorTemperature goes above this limit
bsnSensedTemperatureTooHigh Alarm will be sent out
Parsed from file AIRESPACE-WIRELESS-MIB.mib
Module: AIRESPACE-WIRELESS-MIB
Internal Temperature Alarm High Limit in Centigrade. If the
bsnSensorTemperature goes above this limit
bsnSensedTemperatureTooHigh Alarm will be sent out
Internal Temperature Alarm High Limit in Centigrade. If the
bsnSensorTemperature goes above this limit
bsnSensedTemperatureTooHigh Alarm will be sent out
Parsed from file AIRESPACE-WIRELESS-MIB.my.txt
Company: None
Module: AIRESPACE-WIRELESS-MIB
Internal Temperature Alarm High Limit in Centigrade. If the
bsnSensorTemperature goes above this limit
bsnSensedTemperatureTooHigh Alarm will be sent out
bsnTemperatureAlarmHighLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Internal Temperature Alarm High Limit in Centigrade. If the bsnSensorTemperature goes above this limit bsnSensedTemperatureTooHigh Alarm will be sent out" ::= { bsnGlobalDot11Config 15 }
bsnTemperatureAlarmHighLimit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Internal Temperature Alarm High Limit in Centigrade. If the bsnSensorTemperature goes above this limit bsnSensedTemperatureTooHigh Alarm will be sent out" ::= { bsnGlobalDot11Config 15 }
Vendor: Airespace, Inc (formerly Black Storm Networks)
Module: AIRESPACE-WIRELESS-MIB
[Automatically extracted from oidview.com]
bsnTemperatureAlarmHighLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Internal Temperature Alarm High Limit in Centigrade. If the bsnSensorTemperature goes above this limit bsnSensedTemperatureTooHigh Alarm will be sent out" ::= { bsnGlobalDot11Config 15 }
bsnTemperatureAlarmHighLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Internal Temperature Alarm High Limit in Centigrade. If the bsnSensorTemperature goes above this limit bsnSensedTemperatureTooHigh Alarm will be sent out" ::= { bsnGlobalDot11Config 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.14179.2.3.1.15.0 | bsnTemperatureAlarmHighLimit | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.14179.2.3.1.1 | bsnGlobalDot11PrivacyOptionImplemented | 1 | 1 | This attribute, when true, shall indicate that the IEEE 802.11 WEP option is implemented. The default value of this attribute sh… |
| 1.3.6.1.4.1.14179.2.3.1.2 | bsnGlobalDot11AuthenticationResponseTimeOut | 1 | 1 | This attribute shall specify the number of TU that a responding STA should wait for the next frame in the authentication sequence. |
| 1.3.6.1.4.1.14179.2.3.1.3 | bsnGlobalDot11MultiDomainCapabilityImplemented | 1 | 1 | This attribute, when TRUE, indicates that the station implementation is capable of supporting multiple regulatory domains. The c… |
| 1.3.6.1.4.1.14179.2.3.1.4 | bsnGlobalDot11MultiDomainCapabilityEnabled | 1 | 1 | This attribute, when TRUE, indicates that the capability of the station to operate in multiple regulatory domains is enabled. Th… |
| 1.3.6.1.4.1.14179.2.3.1.5 | bsnGlobalDot11CountryIndex | 1 | 1 | This attribute identifies the country in which the station is operating. |
| 1.3.6.1.4.1.14179.2.3.1.6 | bsnGlobalDot11LoadBalancing | 1 | 1 | This attribute specifies if load balancing of clients is enabled on disabled. |
| 1.3.6.1.4.1.14179.2.3.1.7 | bsnGlobalDot11RogueTimer | 1 | 1 | This attribute specifies in seconds, the time interval after which a Rogue Entry in Rogue Table will expire if no beacon is heard… |
| 1.3.6.1.4.1.14179.2.3.1.8 | bsnPrimaryMwarForAPs | 1 | 1 | This attribute specifies if this Switch acts a Master Switch for the Airespace APs. So if an Airespace AP doesn't find its Primar… |
| 1.3.6.1.4.1.14179.2.3.1.9 | bsnRtpProtocolPriority | 1 | 1 | Real Time Protocol Priority. |
| 1.3.6.1.4.1.14179.2.3.1.10 | bsnSystemCurrentTime | 1 | 1 | This attribute will display the Current System time on the Switch. |
| 1.3.6.1.4.1.14179.2.3.1.11 | bsnUpdateSystemTime | 1 | 1 | Use this attribute to change the System time on the Switch. Specify the new time in this Format MM/DD/YYYY HH:MM:SS |
| 1.3.6.1.4.1.14179.2.3.1.12 | bsnOperatingTemperatureEnvironment | 1 | 1 | Operating Environment of the Airespace Switch. commercial is Commercial (0 to 40 C) and industrial is Industrial (-10 to 70 C) |
| 1.3.6.1.4.1.14179.2.3.1.13 | bsnSensorTemperature | 1 | 1 | Current Internal Temperature of the unit in Centigrade |
| 1.3.6.1.4.1.14179.2.3.1.14 | bsnTemperatureAlarmLowLimit | 1 | 1 | Internal Temperature Alarm Low Limit in Centigrade. If the bsnSensorTemperature goes below this limit bsnSensedTemperatureTooLow … |
| 1.3.6.1.4.1.14179.2.3.1.16 | bsnVirtualGatewayAddress | 1 | 1 | Virtual Gateway Address of the Switch. This is used by web auth and Ipsec. If the virtual IP Address is changed, the Switch has t… |
| 1.3.6.1.4.1.14179.2.3.1.17 | bsnRFMobilityDomainName | 1 | 1 | RF Mobility Group Name to which this Airespace Switch belongs. Airespace Switches on a network form a RF Group as well as a Mobil… |
| 1.3.6.1.4.1.14179.2.3.1.18 | bsnClientWatchListFeature | 1 | 1 | This flag should be turned on for the client watch lists to be enabled on the switch. When enabled, the switch generates Client A… |
| 1.3.6.1.4.1.14179.2.3.1.19 | bsnRogueLocationDiscoveryProtocol | 1 | 1 | This flag should be turned on to enable the Rogue Location Discovery Protocol feature on the switch. |
| 1.3.6.1.4.1.14179.2.3.1.20 | bsnRogueAutoContainFeature | 1 | 1 | This flag should be turned on to allow the switch to contain the rogues automatically if detected on the wired network. |
| 1.3.6.1.4.1.14179.2.3.1.21 | bsnOverAirProvisionApMode | 1 | 1 | Over the Air Provisioning Mode for APs |
| 1.3.6.1.4.1.14179.2.3.1.22 | bsnMaximumNumberOfConcurrentLogins | 1 | 1 | This attribute specifies the maximum number of concurrent logins that the switch will allow for a single user. A value 0 implies … |
| 1.3.6.1.4.1.14179.2.3.1.23 | bsnAutoContainRoguesAdvertisingSsid | 1 | 1 | This flag should be set to 1 to allow the switch to contain automatically those rogues that are advertising our SSID. If value is… |
| 1.3.6.1.4.1.14179.2.3.1.24 | bsnAutoContainAdhocNetworks | 1 | 1 | This flag should be set to 1 to allow the switch to contain automatically the adhoc networks detected by the switch. If value is … |
| 1.3.6.1.4.1.14179.2.3.1.25 | bsnAutoContainTrustedClientsOnRogueAps | 1 | 1 | This flag should be set to 1 to allow the switch to contain automatically those trusted clients that are associated to rogue APs.… |
| 1.3.6.1.4.1.14179.2.3.1.26 | bsnValidateRogueClientsAgainstAAA | 1 | 1 | This flag should be turned on to allow the switch to validate 'valid' mobiles associating with rogue APs. For example, if a clien… |
| 1.3.6.1.4.1.14179.2.3.1.27 | bsnSystemTimezoneDelta | 1 | 1 | The delta (difference) between the local time and the Universal Coordinated Time in hours. For example, it is -8 for the PST and … |
| 1.3.6.1.4.1.14179.2.3.1.28 | bsnSystemTimezoneDaylightSavings | 1 | 1 | This flag specifies if daylight savings are enabled for the current timezone. |
| 1.3.6.1.4.1.14179.2.3.1.29 | bsnAllowAuthorizeApAgainstAAA | 1 | 1 | This flag specifies if LWAPP is allowed to get authorization via RADIUS or local database for an AP. |
| 1.3.6.1.4.1.14179.2.3.1.30 | bsnSystemTimezoneDeltaMinutes | 1 | 1 | The minutes component of delta (difference) between the local time and the Universal Coordinated Time. |
| 1.3.6.1.4.1.14179.2.3.1.31 | bsnApFallbackEnabled | 1 | 1 | This flag specifies if the APs should continue LWAPP discoveries to fallback to the primary switch in case they are not already a… |
| 1.3.6.1.4.1.14179.2.3.1.32 | bsnAppleTalkEnabled | 1 | 1 | This flag turns on the appletalk bridging in the switch such that the packets from Apple clients that use appletalk format can be… |
| 1.3.6.1.4.1.14179.2.3.1.40 | bsnTrustedApPolicyConfig | 8 | 16 | None |
| 1.3.6.1.4.1.14179.2.3.1.41 | bsnClientExclusionPolicyConfig | 6 | 12 | None |
| 1.3.6.1.4.1.14179.2.3.1.42 | bsnSignatureConfig | 5 | 52 | None |
| 1.3.6.1.4.1.14179.2.3.1.43 | bsnRfIdTagConfig | 3 | 6 | None |
| 1.3.6.1.4.1.14179.2.3.1.44 | bsnAPNeighborAuthConfig | 2 | 4 | None |
| 1.3.6.1.4.1.14179.2.3.1.45 | bsnRFNetworkName | 1 | 1 | RF Network Group Name to which this Airespace Switch belongs. Airespace Switches on a network form a RF Network Group as well as … |
| 1.3.6.1.4.1.14179.2.3.1.46 | bsnFastSSIDChangeFeature | 1 | 1 | Configures Fast SSID changing feature for mobile-stations. When enabled, permits mobile-stations to change SSIDs without having t… |
| 1.3.6.1.4.1.14179.2.3.1.47 | bsnBridgingPolicyConfig | 2 | 4 | None |
| 1.3.6.1.4.1.14179.2.3.1.48 | bsnAcceptSelfSignedCertificate | 1 | 1 | This flag specifies if controller will accept Self Signed Certificate from AP as part of authorization. |
| 1.3.6.1.4.1.14179.2.3.1.49 | bsnSystemClockTime | 1 | 1 | This object represents the current clock time of the controller and expressed as the number of seconds elapsed since 00:00:00 on J… |