bsnGlobalDot11bConfig OBJECT IDENTIFIER ::= { bsnGlobalDot11b 1 }
bsnGlobalDot11bConfig OBJECT IDENTIFIER ::= { bsnGlobalDot11b 1 }
Vendor: Airespace, Inc (formerly Black Storm Networks)
Module: AIRESPACE-WIRELESS-MIB
[Automatically extracted from oidview.com]
bsnGlobalDot11bConfig OBJECT IDENTIFIER ::= { bsnGlobalDot11b 1 }
bsnGlobalDot11bConfig OBJECT IDENTIFIER ::= { bsnGlobalDot11b 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.14179.2.3.2.1.1 | bsnGlobalDot11bNetworkStatus | 1 | 1 | 802.11b Network Admin Status. |
| 1.3.6.1.4.1.14179.2.3.2.1.2 | bsnGlobalDot11bBeaconPeriod | 1 | 1 | This attribute shall specify the number of TU that a AP Radio shall use for scheduling Beacon tranmissions. This value is transmi… |
| 1.3.6.1.4.1.14179.2.3.2.1.3 | bsnGlobalDot11bDynamicChannelAssignment | 1 | 1 | Dynamic channel assignment(DCA) has three modes. When the mode is auto, the channel assignment will be periodically updated for a… |
| 1.3.6.1.4.1.14179.2.3.2.1.4 | bsnGlobalDot11bCurrentChannel | 1 | 1 | The current operating frequency channel of the DSSS PHY. Valid channel numbers are as defined in 15.4.6.2. This attribute will be… |
| 1.3.6.1.4.1.14179.2.3.2.1.5 | bsnGlobalDot11bDynamicChannelUpdateInterval | 1 | 1 | When Channel dynamic alogirthm is running, this interval (in secs) specifies how often Channel assignement updates are attempted … |
| 1.3.6.1.4.1.14179.2.3.2.1.6 | bsnGlobalDot11bInputsForDCA | 1 | 1 | This attribute is a bit mask specifying what to include in DCA optimization.Below is a list of parameters and their corresponding… |
| 1.3.6.1.4.1.14179.2.3.2.1.7 | bsnGlobalDot11bChannelUpdateCmdInvoke | 1 | 1 | When set to activate this starts a DCA calculation regardless of the dynamic update interval. This command should be invoke on Gr… |
| 1.3.6.1.4.1.14179.2.3.2.1.8 | bsnGlobalDot11bChannelUpdateCmdStatus | 1 | 1 | After setting bsnGlobalDot11bChannelUpdateCmdInvoke to activate, the result of action can be monitored from here. It takes 5 minu… |
| 1.3.6.1.4.1.14179.2.3.2.1.9 | bsnGlobalDot11bDynamicTransmitPowerControl | 1 | 1 | Dynamic transmit power (DTP) has three modes. When the mode is auto, the transmit power of each Airespace AP will be periodically… |
| 1.3.6.1.4.1.14179.2.3.2.1.10 | bsnGlobalDot11bDynamicTxPowerControlInterval | 1 | 1 | When Tx PowerControl dynamic alogirthm is running, this interval(in secs) specifies how often TxPower control updates are attempt… |
| 1.3.6.1.4.1.14179.2.3.2.1.11 | bsnGlobalDot11bCurrentTxPowerLevel | 1 | 1 | The TxPowerLevel N currently being used to transmit data. Some PHYs also use this value to determine the receiver sensitivity req… |
| 1.3.6.1.4.1.14179.2.3.2.1.12 | bsnGlobalDot11bInputsForDTP | 1 | 1 | This attribute is a bit mask specifying what to include in DCA optimization.Below is a list of parameters and their corresponding… |
| 1.3.6.1.4.1.14179.2.3.2.1.13 | bsnGlobalDot11bPowerUpdateCmdInvoke | 1 | 1 | When set to activate this starts a DTP calculation regardless of the dynamic update interval. This command should be invoke on Gr… |
| 1.3.6.1.4.1.14179.2.3.2.1.14 | bsnGlobalDot11bPowerUpdateCmdStatus | 1 | 1 | After setting bsnGlobalDot11aChannelUpdateCmdInvoke to activate, the result of action can be monitored from here. It takes 5 minu… |
| 1.3.6.1.4.1.14179.2.3.2.1.15 | bsnGlobalDot11bDataRate1Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
| 1.3.6.1.4.1.14179.2.3.2.1.16 | bsnGlobalDot11bDataRate2Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
| 1.3.6.1.4.1.14179.2.3.2.1.17 | bsnGlobalDot11bDataRate5AndHalfMhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
| 1.3.6.1.4.1.14179.2.3.2.1.18 | bsnGlobalDot11bDataRate11Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
| 1.3.6.1.4.1.14179.2.3.2.1.19 | bsnGlobalDot11bShortPreamble | 1 | 1 | 802.11b Short Preamble. |
| 1.3.6.1.4.1.14179.2.3.2.1.20 | bsnGlobalDot11bDot11gSupport | 1 | 1 | This attribute is enabled to also support 802.11g protocol on the 802.11b network. Enabling 802.11g allows additional data rates:… |
| 1.3.6.1.4.1.14179.2.3.2.1.21 | bsnGlobalDot11bDataRate6Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled. |
| 1.3.6.1.4.1.14179.2.3.2.1.22 | bsnGlobalDot11bDataRate9Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled. |
| 1.3.6.1.4.1.14179.2.3.2.1.23 | bsnGlobalDot11bDataRate12Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled. |
| 1.3.6.1.4.1.14179.2.3.2.1.24 | bsnGlobalDot11bDataRate18Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled. |
| 1.3.6.1.4.1.14179.2.3.2.1.25 | bsnGlobalDot11bDataRate24Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled. |
| 1.3.6.1.4.1.14179.2.3.2.1.26 | bsnGlobalDot11bDataRate36Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled. |
| 1.3.6.1.4.1.14179.2.3.2.1.27 | bsnGlobalDot11bDataRate48Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled. |
| 1.3.6.1.4.1.14179.2.3.2.1.28 | bsnGlobalDot11bDataRate54Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled. |
| 1.3.6.1.4.1.14179.2.3.2.1.29 | bsnGlobalDot11bPicoCellMode | 1 | 1 | Configures the 802.11b pico-cell mode. This cannot be enabled when the Fast Roaming Mode is enabled. |
| 1.3.6.1.4.1.14179.2.3.2.1.30 | bsnGlobalDot11bFastRoamingMode | 1 | 1 | Configures the 802.11b fast-roaming mode. This cannot be enabled when the Pico Cell Mode is enabled. |
| 1.3.6.1.4.1.14179.2.3.2.1.31 | bsnGlobalDot11bFastRoamingVoipMinRate | 1 | 1 | Configures the minimum transmission rate allowed for VoIP on any 802.11b radio. |
| 1.3.6.1.4.1.14179.2.3.2.1.32 | bsnGlobalDot11bFastRoamingVoipPercentage | 1 | 1 | Configures the percentage of effective bandwidth for the minimum rate reserved for VoIP. |
| 1.3.6.1.4.1.14179.2.3.2.1.33 | bsnGlobalDot11b80211eMaxBandwidth | 1 | 1 | This represents the maximum bandwidth allocated to 802.11e clients. It is expressed as percentage of the total bandwidth of 802.… |
| 1.3.6.1.4.1.14179.2.3.2.1.34 | bsnGlobalDot11bDTPCSupport | 1 | 1 | This attribute may be used to enable the DTPC support on all 802.11b/g radios. DTPC or Dynamic Transmit Power Control support mea… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.14179.2.3.2.2 | bsnGlobalDot11bPhy | 19 | 38 | None |