When Channel dynamic alogirthm is running, this interval (in
secs) specifies how often Channel assignement updates are
attempted on an Airespace AP. NOTE: hysteresis is built into
the algorithms so we will not have uproductive changes
occuring. Default value is 600 secs
Parsed from file AIRESPACE-WIRELESS-MIB.mib
Module: AIRESPACE-WIRELESS-MIB
When Channel dynamic alogirthm is running, this interval (in
secs) specifies how often Channel assignement updates are
attempted on an Airespace AP. NOTE: hysteresis is built into
the algorithms so we will not have uproductive changes
occuring. Default value is 600 secs
When Channel dynamic alogirthm is running, this interval (in
secs) specifies how often Channel assignement updates are
attempted on an Airespace AP. NOTE: hysteresis is built into
the algorithms so we will not have uproductive changes
occuring. Default value is 600 secs
Parsed from file AIRESPACE-WIRELESS-MIB.my.txt
Company: None
Module: AIRESPACE-WIRELESS-MIB
When Channel dynamic alogirthm is running, this interval (in
secs) specifies how often Channel assignement updates are
attempted on an Airespace AP. NOTE: hysteresis is built into
the algorithms so we will not have uproductive changes
occuring. Default value is 600 secs
bsnGlobalDot11bDynamicChannelUpdateInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "When Channel dynamic alogirthm is running, this interval (in secs) specifies how often Channel assignement updates are attempted on an Airespace AP. NOTE: hysteresis is built into the algorithms so we will not have uproductive changes occuring. Default value is 600 secs" DEFVAL { 600 } ::= {bsnGlobalDot11bConfig 5}
bsnGlobalDot11bDynamicChannelUpdateInterval OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "When Channel dynamic alogirthm is running, this interval (in secs) specifies how often Channel assignement updates are attempted on an Airespace AP. NOTE: hysteresis is built into the algorithms so we will not have uproductive changes occuring. Default value is 600 secs" DEFVAL { 600 } ::= { bsnGlobalDot11bConfig 5 }
Vendor: Airespace, Inc (formerly Black Storm Networks)
Module: AIRESPACE-WIRELESS-MIB
[Automatically extracted from oidview.com]
bsnGlobalDot11bDynamicChannelUpdateInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "When Channel dynamic alogirthm is running, this interval (in secs) specifies how often Channel assignement updates are attempted on an Airespace AP. NOTE: hysteresis is built into the algorithms so we will not have uproductive changes occuring. Default value is 600 secs" DEFVAL { 600 } ::= { bsnGlobalDot11bConfig 5 }
bsnGlobalDot11bDynamicChannelUpdateInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "When Channel dynamic alogirthm is running, this interval (in secs) specifies how often Channel assignement updates are attempted on an Airespace AP. NOTE: hysteresis is built into the algorithms so we will not have uproductive changes occuring. Default value is 600 secs" DEFVAL { 600 } ::= { bsnGlobalDot11bConfig 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.14179.2.3.2.1.5.0 | bsnGlobalDot11bDynamicChannelUpdateInterval | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.14179.2.3.2.1.1 | bsnGlobalDot11bNetworkStatus | 1 | 1 | 802.11b Network Admin Status. |
1.3.6.1.4.1.14179.2.3.2.1.2 | bsnGlobalDot11bBeaconPeriod | 1 | 1 | This attribute shall specify the number of TU that a AP Radio shall use for scheduling Beacon tranmissions. This value is transmi… |
1.3.6.1.4.1.14179.2.3.2.1.3 | bsnGlobalDot11bDynamicChannelAssignment | 1 | 1 | Dynamic channel assignment(DCA) has three modes. When the mode is auto, the channel assignment will be periodically updated for a… |
1.3.6.1.4.1.14179.2.3.2.1.4 | bsnGlobalDot11bCurrentChannel | 1 | 1 | The current operating frequency channel of the DSSS PHY. Valid channel numbers are as defined in 15.4.6.2. This attribute will be… |
1.3.6.1.4.1.14179.2.3.2.1.6 | bsnGlobalDot11bInputsForDCA | 1 | 1 | This attribute is a bit mask specifying what to include in DCA optimization.Below is a list of parameters and their corresponding… |
1.3.6.1.4.1.14179.2.3.2.1.7 | bsnGlobalDot11bChannelUpdateCmdInvoke | 1 | 1 | When set to activate this starts a DCA calculation regardless of the dynamic update interval. This command should be invoke on Gr… |
1.3.6.1.4.1.14179.2.3.2.1.8 | bsnGlobalDot11bChannelUpdateCmdStatus | 1 | 1 | After setting bsnGlobalDot11bChannelUpdateCmdInvoke to activate, the result of action can be monitored from here. It takes 5 minu… |
1.3.6.1.4.1.14179.2.3.2.1.9 | bsnGlobalDot11bDynamicTransmitPowerControl | 1 | 1 | Dynamic transmit power (DTP) has three modes. When the mode is auto, the transmit power of each Airespace AP will be periodically… |
1.3.6.1.4.1.14179.2.3.2.1.10 | bsnGlobalDot11bDynamicTxPowerControlInterval | 1 | 1 | When Tx PowerControl dynamic alogirthm is running, this interval(in secs) specifies how often TxPower control updates are attempt… |
1.3.6.1.4.1.14179.2.3.2.1.11 | bsnGlobalDot11bCurrentTxPowerLevel | 1 | 1 | The TxPowerLevel N currently being used to transmit data. Some PHYs also use this value to determine the receiver sensitivity req… |
1.3.6.1.4.1.14179.2.3.2.1.12 | bsnGlobalDot11bInputsForDTP | 1 | 1 | This attribute is a bit mask specifying what to include in DCA optimization.Below is a list of parameters and their corresponding… |
1.3.6.1.4.1.14179.2.3.2.1.13 | bsnGlobalDot11bPowerUpdateCmdInvoke | 1 | 1 | When set to activate this starts a DTP calculation regardless of the dynamic update interval. This command should be invoke on Gr… |
1.3.6.1.4.1.14179.2.3.2.1.14 | bsnGlobalDot11bPowerUpdateCmdStatus | 1 | 1 | After setting bsnGlobalDot11aChannelUpdateCmdInvoke to activate, the result of action can be monitored from here. It takes 5 minu… |
1.3.6.1.4.1.14179.2.3.2.1.15 | bsnGlobalDot11bDataRate1Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
1.3.6.1.4.1.14179.2.3.2.1.16 | bsnGlobalDot11bDataRate2Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
1.3.6.1.4.1.14179.2.3.2.1.17 | bsnGlobalDot11bDataRate5AndHalfMhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
1.3.6.1.4.1.14179.2.3.2.1.18 | bsnGlobalDot11bDataRate11Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
1.3.6.1.4.1.14179.2.3.2.1.19 | bsnGlobalDot11bShortPreamble | 1 | 1 | 802.11b Short Preamble. |
1.3.6.1.4.1.14179.2.3.2.1.20 | bsnGlobalDot11bDot11gSupport | 1 | 1 | This attribute is enabled to also support 802.11g protocol on the 802.11b network. Enabling 802.11g allows additional data rates:… |
1.3.6.1.4.1.14179.2.3.2.1.21 | bsnGlobalDot11bDataRate6Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled. |
1.3.6.1.4.1.14179.2.3.2.1.22 | bsnGlobalDot11bDataRate9Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled. |
1.3.6.1.4.1.14179.2.3.2.1.23 | bsnGlobalDot11bDataRate12Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled. |
1.3.6.1.4.1.14179.2.3.2.1.24 | bsnGlobalDot11bDataRate18Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled. |
1.3.6.1.4.1.14179.2.3.2.1.25 | bsnGlobalDot11bDataRate24Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled. |
1.3.6.1.4.1.14179.2.3.2.1.26 | bsnGlobalDot11bDataRate36Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled. |
1.3.6.1.4.1.14179.2.3.2.1.27 | bsnGlobalDot11bDataRate48Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled. |
1.3.6.1.4.1.14179.2.3.2.1.28 | bsnGlobalDot11bDataRate54Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled. |
1.3.6.1.4.1.14179.2.3.2.1.29 | bsnGlobalDot11bPicoCellMode | 1 | 1 | Configures the 802.11b pico-cell mode. This cannot be enabled when the Fast Roaming Mode is enabled. |
1.3.6.1.4.1.14179.2.3.2.1.30 | bsnGlobalDot11bFastRoamingMode | 1 | 1 | Configures the 802.11b fast-roaming mode. This cannot be enabled when the Pico Cell Mode is enabled. |
1.3.6.1.4.1.14179.2.3.2.1.31 | bsnGlobalDot11bFastRoamingVoipMinRate | 1 | 1 | Configures the minimum transmission rate allowed for VoIP on any 802.11b radio. |
1.3.6.1.4.1.14179.2.3.2.1.32 | bsnGlobalDot11bFastRoamingVoipPercentage | 1 | 1 | Configures the percentage of effective bandwidth for the minimum rate reserved for VoIP. |
1.3.6.1.4.1.14179.2.3.2.1.33 | bsnGlobalDot11b80211eMaxBandwidth | 1 | 1 | This represents the maximum bandwidth allocated to 802.11e clients. It is expressed as percentage of the total bandwidth of 802.… |
1.3.6.1.4.1.14179.2.3.2.1.34 | bsnGlobalDot11bDTPCSupport | 1 | 1 | This attribute may be used to enable the DTPC support on all 802.11b/g radios. DTPC or Dynamic Transmit Power Control support mea… |