Dot11a Low Band Network Status
Parsed from file AIRESPACE-WIRELESS-MIB.mib
Module: AIRESPACE-WIRELESS-MIB
Dot11a Low Band Network Status
Dot11a Low Band Network Status
Parsed from file AIRESPACE-WIRELESS-MIB.my.txt
Company: None
Module: AIRESPACE-WIRELESS-MIB
Dot11a Low Band Network Status
bsnGlobalDot11aLowBandNetwork OBJECT-TYPE SYNTAX INTEGER {disable(0),enable(1)} MAX-ACCESS read-only STATUS current DESCRIPTION "Dot11a Low Band Network Status" ::= {bsnGlobalDot11aConfig 2}
bsnGlobalDot11aLowBandNetwork OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Dot11a Low Band Network Status" ::= { bsnGlobalDot11aConfig 2 }
Vendor: Airespace, Inc (formerly Black Storm Networks)
Module: AIRESPACE-WIRELESS-MIB
[Automatically extracted from oidview.com]
bsnGlobalDot11aLowBandNetwork OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Dot11a Low Band Network Status" ::= { bsnGlobalDot11aConfig 2 }
bsnGlobalDot11aLowBandNetwork OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Dot11a Low Band Network Status" ::= { bsnGlobalDot11aConfig 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.14179.2.3.3.1.2.0 | bsnGlobalDot11aLowBandNetwork | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.14179.2.3.3.1.1 | bsnGlobalDot11aNetworkStatus | 1 | 1 | Dot11a Network Status |
| 1.3.6.1.4.1.14179.2.3.3.1.3 | bsnGlobalDot11aMediumBandNetwork | 1 | 1 | Dot11a Mid Band Network Status |
| 1.3.6.1.4.1.14179.2.3.3.1.4 | bsnGlobalDot11aHighBandNetwork | 1 | 1 | Dot11a High Band Network Status |
| 1.3.6.1.4.1.14179.2.3.3.1.5 | bsnGlobalDot11aBeaconPeriod | 1 | 1 | This attribute shall specify the number of TU that a AP Radio shall use for scheduling Beacon tranmissions. This value is transmi… |
| 1.3.6.1.4.1.14179.2.3.3.1.6 | bsnGlobalDot11aDynamicChannelAssignment | 1 | 1 | Dynamic channel assignment(DCA) has three modes. When the mode is auto, the channel assignment will be periodically updated for a… |
| 1.3.6.1.4.1.14179.2.3.3.1.7 | bsnGlobalDot11aCurrentChannel | 1 | 1 | The number of the current operating frequency channel of the OFDM PHY. |
| 1.3.6.1.4.1.14179.2.3.3.1.8 | bsnGlobalDot11aDynamicChannelUpdateInterval | 1 | 1 | When Channel dynamic alogirthm is running, this interval(in secs) specifies how often Channel assignement updates are attempted o… |
| 1.3.6.1.4.1.14179.2.3.3.1.9 | bsnGlobalDot11aInputsForDCA | 1 | 1 | This attribute is a bit mask specifying what to include in DCA optimization.Below is a list of parameters and their corresponding… |
| 1.3.6.1.4.1.14179.2.3.3.1.10 | bsnGlobalDot11aChannelUpdateCmdInvoke | 1 | 1 | When set to activate this starts a DCA calculation regardless of the dynamic update interval. This command should be invoke on Gr… |
| 1.3.6.1.4.1.14179.2.3.3.1.11 | bsnGlobalDot11aChannelUpdateCmdStatus | 1 | 1 | After setting bsnGlobalDot11aChannelUpdateCmdInvoke to activate, the result of action can be monitored from here. It takes 5 minu… |
| 1.3.6.1.4.1.14179.2.3.3.1.12 | bsnGlobalDot11aDynamicTransmitPowerControl | 1 | 1 | Dynamic transmit power (DTP) has three modes. When the mode is auto, the transmit power of each Airespace AP will be periodically… |
| 1.3.6.1.4.1.14179.2.3.3.1.13 | bsnGlobalDot11aCurrentTxPowerLevel | 1 | 1 | The TxPowerLevel N currently being used to transmit data. Some PHYs also use this value to determine the receiver sensitivity req… |
| 1.3.6.1.4.1.14179.2.3.3.1.14 | bsnGlobalDot11aDynamicTxPowerControlInterval | 1 | 1 | When Tx PowerControl dynamic alogirthm is running, this interval(in secs) specifies how often TxPower control updates are attempt… |
| 1.3.6.1.4.1.14179.2.3.3.1.15 | bsnGlobalDot11aInputsForDTP | 1 | 1 | This attribute is a bit mask specifying what to include in DCA optimization.Below is a list of parameters and their corresponding… |
| 1.3.6.1.4.1.14179.2.3.3.1.16 | bsnGlobalDot11aPowerUpdateCmdInvoke | 1 | 1 | When set to activate this starts a DTP calculation regardless of the dynamic update interval. This command should be invoke on Gr… |
| 1.3.6.1.4.1.14179.2.3.3.1.17 | bsnGlobalDot11aPowerUpdateCmdStatus | 1 | 1 | After setting bsnGlobalDot11aChannelUpdateCmdInvoke to activate, the result of action can be monitored from here. It takes 5 minu… |
| 1.3.6.1.4.1.14179.2.3.3.1.19 | bsnGlobalDot11aDataRate6Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
| 1.3.6.1.4.1.14179.2.3.3.1.20 | bsnGlobalDot11aDataRate9Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
| 1.3.6.1.4.1.14179.2.3.3.1.21 | bsnGlobalDot11aDataRate12Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
| 1.3.6.1.4.1.14179.2.3.3.1.22 | bsnGlobalDot11aDataRate18Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
| 1.3.6.1.4.1.14179.2.3.3.1.23 | bsnGlobalDot11aDataRate24Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
| 1.3.6.1.4.1.14179.2.3.3.1.24 | bsnGlobalDot11aDataRate36Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
| 1.3.6.1.4.1.14179.2.3.3.1.25 | bsnGlobalDot11aDataRate48Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
| 1.3.6.1.4.1.14179.2.3.3.1.26 | bsnGlobalDot11aDataRate54Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
| 1.3.6.1.4.1.14179.2.3.3.1.27 | bsnGlobalDot11aPicoCellMode | 1 | 1 | Configures the 802.11a pico-cell mode. This cannot be enabled when the Fast Roaming Mode is enabled. |
| 1.3.6.1.4.1.14179.2.3.3.1.28 | bsnGlobalDot11aFastRoamingMode | 1 | 1 | Configures the 802.11a fast-roaming mode. This cannot be enabled when the Pico Cell Mode is enabled. |
| 1.3.6.1.4.1.14179.2.3.3.1.29 | bsnGlobalDot11aFastRoamingVoipMinRate | 1 | 1 | Configures the minimum transmission rate allowed for VoIP on any 802.11a radio. |
| 1.3.6.1.4.1.14179.2.3.3.1.30 | bsnGlobalDot11aFastRoamingVoipPercentage | 1 | 1 | Configures the percentage of effective bandwidth for the minimum rate reserved for VoIP. |
| 1.3.6.1.4.1.14179.2.3.3.1.31 | bsnGlobalDot11a80211eMaxBandwidth | 1 | 1 | This represents the maximum bandwidth allocated to 802.11e clients. It is expressed as percentage of the total bandwidth of 802.… |
| 1.3.6.1.4.1.14179.2.3.3.1.32 | bsnGlobalDot11aDTPCSupport | 1 | 1 | This attribute may be used to enable the DTPC support on all 802.11a radios. DTPC or Dynamic Transmit Power Control support means… |