This represents the maximum bandwidth allocated to 802.11e
clients. It is expressed as percentage of the total bandwidth
of 802.11a network. The value of this attribute can vary from
0 to 100.
Parsed from file AIRESPACE-WIRELESS-MIB.mib
Module: AIRESPACE-WIRELESS-MIB
This represents the maximum bandwidth allocated to 802.11e
clients. It is expressed as percentage of the total bandwidth
of 802.11a network. The value of this attribute can vary from
0 to 100.
This represents the maximum bandwidth allocated to 802.11e
clients. It is expressed as percentage of the total bandwidth
of 802.11a network. The value of this attribute can vary from
0 to 100.
Parsed from file AIRESPACE-WIRELESS-MIB.my.txt
Company: None
Module: AIRESPACE-WIRELESS-MIB
This represents the maximum bandwidth allocated to 802.11e
clients. It is expressed as percentage of the total bandwidth
of 802.11a network. The value of this attribute can vary from
0 to 100.
bsnGlobalDot11a80211eMaxBandwidth OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "This represents the maximum bandwidth allocated to 802.11e clients. It is expressed as percentage of the total bandwidth of 802.11a network. The value of this attribute can vary from 0 to 100." ::= {bsnGlobalDot11aConfig 31}
bsnGlobalDot11a80211eMaxBandwidth OBJECT-TYPE SYNTAX INTEGER(0..100) ACCESS read-write STATUS mandatory DESCRIPTION "This represents the maximum bandwidth allocated to 802.11e clients. It is expressed as percentage of the total bandwidth of 802.11a network. The value of this attribute can vary from 0 to 100." ::= { bsnGlobalDot11aConfig 31 }
Vendor: Airespace, Inc (formerly Black Storm Networks)
Module: AIRESPACE-WIRELESS-MIB
[Automatically extracted from oidview.com]
bsnGlobalDot11a80211eMaxBandwidth OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "This represents the maximum bandwidth allocated to 802.11e clients. It is expressed as percentage of the total bandwidth of 802.11a network. The value of this attribute can vary from 0 to 100." ::= { bsnGlobalDot11aConfig 31 }
bsnGlobalDot11a80211eMaxBandwidth OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "This represents the maximum bandwidth allocated to 802.11e clients. It is expressed as percentage of the total bandwidth of 802.11a network. The value of this attribute can vary from 0 to 100." ::= { bsnGlobalDot11aConfig 31 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.14179.2.3.3.1.31.0 | bsnGlobalDot11a80211eMaxBandwidth | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.14179.2.3.3.1.1 | bsnGlobalDot11aNetworkStatus | 1 | 1 | Dot11a Network Status |
1.3.6.1.4.1.14179.2.3.3.1.2 | bsnGlobalDot11aLowBandNetwork | 1 | 1 | Dot11a Low Band Network Status |
1.3.6.1.4.1.14179.2.3.3.1.3 | bsnGlobalDot11aMediumBandNetwork | 1 | 1 | Dot11a Mid Band Network Status |
1.3.6.1.4.1.14179.2.3.3.1.4 | bsnGlobalDot11aHighBandNetwork | 1 | 1 | Dot11a High Band Network Status |
1.3.6.1.4.1.14179.2.3.3.1.5 | bsnGlobalDot11aBeaconPeriod | 1 | 1 | This attribute shall specify the number of TU that a AP Radio shall use for scheduling Beacon tranmissions. This value is transmi… |
1.3.6.1.4.1.14179.2.3.3.1.6 | bsnGlobalDot11aDynamicChannelAssignment | 1 | 1 | Dynamic channel assignment(DCA) has three modes. When the mode is auto, the channel assignment will be periodically updated for a… |
1.3.6.1.4.1.14179.2.3.3.1.7 | bsnGlobalDot11aCurrentChannel | 1 | 1 | The number of the current operating frequency channel of the OFDM PHY. |
1.3.6.1.4.1.14179.2.3.3.1.8 | bsnGlobalDot11aDynamicChannelUpdateInterval | 1 | 1 | When Channel dynamic alogirthm is running, this interval(in secs) specifies how often Channel assignement updates are attempted o… |
1.3.6.1.4.1.14179.2.3.3.1.9 | bsnGlobalDot11aInputsForDCA | 1 | 1 | This attribute is a bit mask specifying what to include in DCA optimization.Below is a list of parameters and their corresponding… |
1.3.6.1.4.1.14179.2.3.3.1.10 | bsnGlobalDot11aChannelUpdateCmdInvoke | 1 | 1 | When set to activate this starts a DCA calculation regardless of the dynamic update interval. This command should be invoke on Gr… |
1.3.6.1.4.1.14179.2.3.3.1.11 | bsnGlobalDot11aChannelUpdateCmdStatus | 1 | 1 | After setting bsnGlobalDot11aChannelUpdateCmdInvoke to activate, the result of action can be monitored from here. It takes 5 minu… |
1.3.6.1.4.1.14179.2.3.3.1.12 | bsnGlobalDot11aDynamicTransmitPowerControl | 1 | 1 | Dynamic transmit power (DTP) has three modes. When the mode is auto, the transmit power of each Airespace AP will be periodically… |
1.3.6.1.4.1.14179.2.3.3.1.13 | bsnGlobalDot11aCurrentTxPowerLevel | 1 | 1 | The TxPowerLevel N currently being used to transmit data. Some PHYs also use this value to determine the receiver sensitivity req… |
1.3.6.1.4.1.14179.2.3.3.1.14 | bsnGlobalDot11aDynamicTxPowerControlInterval | 1 | 1 | When Tx PowerControl dynamic alogirthm is running, this interval(in secs) specifies how often TxPower control updates are attempt… |
1.3.6.1.4.1.14179.2.3.3.1.15 | bsnGlobalDot11aInputsForDTP | 1 | 1 | This attribute is a bit mask specifying what to include in DCA optimization.Below is a list of parameters and their corresponding… |
1.3.6.1.4.1.14179.2.3.3.1.16 | bsnGlobalDot11aPowerUpdateCmdInvoke | 1 | 1 | When set to activate this starts a DTP calculation regardless of the dynamic update interval. This command should be invoke on Gr… |
1.3.6.1.4.1.14179.2.3.3.1.17 | bsnGlobalDot11aPowerUpdateCmdStatus | 1 | 1 | After setting bsnGlobalDot11aChannelUpdateCmdInvoke to activate, the result of action can be monitored from here. It takes 5 minu… |
1.3.6.1.4.1.14179.2.3.3.1.19 | bsnGlobalDot11aDataRate6Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
1.3.6.1.4.1.14179.2.3.3.1.20 | bsnGlobalDot11aDataRate9Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
1.3.6.1.4.1.14179.2.3.3.1.21 | bsnGlobalDot11aDataRate12Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
1.3.6.1.4.1.14179.2.3.3.1.22 | bsnGlobalDot11aDataRate18Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
1.3.6.1.4.1.14179.2.3.3.1.23 | bsnGlobalDot11aDataRate24Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
1.3.6.1.4.1.14179.2.3.3.1.24 | bsnGlobalDot11aDataRate36Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
1.3.6.1.4.1.14179.2.3.3.1.25 | bsnGlobalDot11aDataRate48Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
1.3.6.1.4.1.14179.2.3.3.1.26 | bsnGlobalDot11aDataRate54Mhz | 1 | 1 | Specify if this rate is supported or mandatory or disabled |
1.3.6.1.4.1.14179.2.3.3.1.27 | bsnGlobalDot11aPicoCellMode | 1 | 1 | Configures the 802.11a pico-cell mode. This cannot be enabled when the Fast Roaming Mode is enabled. |
1.3.6.1.4.1.14179.2.3.3.1.28 | bsnGlobalDot11aFastRoamingMode | 1 | 1 | Configures the 802.11a fast-roaming mode. This cannot be enabled when the Pico Cell Mode is enabled. |
1.3.6.1.4.1.14179.2.3.3.1.29 | bsnGlobalDot11aFastRoamingVoipMinRate | 1 | 1 | Configures the minimum transmission rate allowed for VoIP on any 802.11a radio. |
1.3.6.1.4.1.14179.2.3.3.1.30 | bsnGlobalDot11aFastRoamingVoipPercentage | 1 | 1 | Configures the percentage of effective bandwidth for the minimum rate reserved for VoIP. |
1.3.6.1.4.1.14179.2.3.3.1.32 | bsnGlobalDot11aDTPCSupport | 1 | 1 | This attribute may be used to enable the DTPC support on all 802.11a radios. DTPC or Dynamic Transmit Power Control support means… |