This object specifies the algorithm(s) used to detect the
alarm. They could include Time Over Threshold,
Deviation From Normal, Dynamic Threshold, Availability < 100%
and Reachability < 100%.
Parsed from file concord-diagmon.mib.txt
Company: None
Module: DiagnosticsMonitor
This object specifies the algorithm(s) used to detect the
alarm. They could include Time Over Threshold,
Deviation From Normal, Dynamic Threshold, Availability < 100%
and Reachability < 100%.
Parsed from file DiagnosticsMonitor.mib
Module: DiagnosticsMonitor
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
nhExceptionType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies the algorithm(s) used to detect the alarm. They could include Time Over Threshold, Deviation From Normal, Dynamic Threshold, Availability < 100% and Reachability < 100%." ::= { nhArgs 5 }
nhExceptionType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies the algorithm(s) used to detect the alarm. They could include Time Over Threshold, Deviation From Normal, Dynamic Threshold, Availability < 100% and Reachability < 100%." ::= { nhArgs 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.149.2.3.5.0 | nhExceptionType | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.149.2.3.1 | nhElementIp | 1 | 1 | This object specifies the IP address of a Network Health element. |
1.3.6.1.4.1.149.2.3.2 | nhElementName | 1 | 1 | This object specifies the name of a Network Health element. |
1.3.6.1.4.1.149.2.3.3 | nhElementId | 1 | 1 | This object specifies the database identifier of a Network Health element. |
1.3.6.1.4.1.149.2.3.4 | nhStartTime | 1 | 1 | This object is the UTC time that the exception or alarm was detected by LiveExceptions. |
1.3.6.1.4.1.149.2.3.6 | nhVariable | 1 | 1 | This object defines the variable(s) used in the rule that created the alarm. |
1.3.6.1.4.1.149.2.3.7 | nhSeverity | 1 | 1 | This object is the severity level of the alarm. The user can view/modify the severity of a rule in the LiveExceptions Rule Editor. |
1.3.6.1.4.1.149.2.3.8 | nhGroup | 1 | 1 | This object defines the group that LiveExceptions is monitoring and that contains the element that has an alarm or exception. Th… |
1.3.6.1.4.1.149.2.3.9 | nhGroupList | 1 | 1 | This object defines the group list that LiveExceptions is monitoring and that contains the element that has an alarm or exceptio… |
1.3.6.1.4.1.149.2.3.10 | nhDisplayStr | 1 | 1 | This object describes the rule which triggered the alarm. This field is blank for exceptions. The Rule Message can be viewed/mod… |
1.3.6.1.4.1.149.2.3.11 | nhExceptionId | 1 | 1 | This object defines a unique ID for the exception (Profile ID) or the alarm (Alarm ID). It is used to run Network Health reports. |
1.3.6.1.4.1.149.2.3.12 | nhTechType | 1 | 1 | nhtechtype |
1.3.6.1.4.1.149.2.3.13 | nhResetTime | 1 | 1 | This object is the UTC time that the LiveExceptions server started. |
1.3.6.1.4.1.149.2.3.14 | nhProfile | 1 | 1 | This object is the name of the profile for this alarm or exception. |
1.3.6.1.4.1.149.2.3.15 | nhProblemStartTime | 1 | 1 | This object is the UTC time when the threshold was first crossed and that later resulted in an alarm or exception for that eleme… |
1.3.6.1.4.1.149.2.3.16 | nhProblemDuration | 1 | 1 | This object is the amount of time (in seconds) spent over the threshold since the problem start time (the time the threshold was… |