This object defines the group that LiveExceptions is monitoring and
that contains the element that has an alarm or exception. This object
value will be blank if LiveExceptions is monitoring a group list.
Parsed from file concord-diagmon.mib.txt
Company: None
Module: DiagnosticsMonitor
This object defines the group that LiveExceptions is monitoring and
that contains the element that has an alarm or exception. This object
value will be blank if LiveExceptions is monitoring a group list.
Parsed from file DiagnosticsMonitor.mib
Module: DiagnosticsMonitor
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
nhGroup OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object defines the group that LiveExceptions is monitoring and that contains the element that has an alarm or exception. This object value will be blank if LiveExceptions is monitoring a group list." ::= { nhArgs 8 }
nhGroup OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object defines the group that LiveExceptions is monitoring and that contains the element that has an alarm or exception. This object value will be blank if LiveExceptions is monitoring a group list." ::= { nhArgs 8 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.149.2.3.8.0 | nhGroup | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.149.2.3.1 | nhElementIp | 1 | 1 | This object specifies the IP address of a Network Health element. |
1.3.6.1.4.1.149.2.3.2 | nhElementName | 1 | 1 | This object specifies the name of a Network Health element. |
1.3.6.1.4.1.149.2.3.3 | nhElementId | 1 | 1 | This object specifies the database identifier of a Network Health element. |
1.3.6.1.4.1.149.2.3.4 | nhStartTime | 1 | 1 | This object is the UTC time that the exception or alarm was detected by LiveExceptions. |
1.3.6.1.4.1.149.2.3.5 | nhExceptionType | 1 | 1 | This object specifies the algorithm(s) used to detect the alarm. They could include Time Over Threshold, Deviation From Normal, D… |
1.3.6.1.4.1.149.2.3.6 | nhVariable | 1 | 1 | This object defines the variable(s) used in the rule that created the alarm. |
1.3.6.1.4.1.149.2.3.7 | nhSeverity | 1 | 1 | This object is the severity level of the alarm. The user can view/modify the severity of a rule in the LiveExceptions Rule Editor. |
1.3.6.1.4.1.149.2.3.9 | nhGroupList | 1 | 1 | This object defines the group list that LiveExceptions is monitoring and that contains the element that has an alarm or exceptio… |
1.3.6.1.4.1.149.2.3.10 | nhDisplayStr | 1 | 1 | This object describes the rule which triggered the alarm. This field is blank for exceptions. The Rule Message can be viewed/mod… |
1.3.6.1.4.1.149.2.3.11 | nhExceptionId | 1 | 1 | This object defines a unique ID for the exception (Profile ID) or the alarm (Alarm ID). It is used to run Network Health reports. |
1.3.6.1.4.1.149.2.3.12 | nhTechType | 1 | 1 | nhtechtype |
1.3.6.1.4.1.149.2.3.13 | nhResetTime | 1 | 1 | This object is the UTC time that the LiveExceptions server started. |
1.3.6.1.4.1.149.2.3.14 | nhProfile | 1 | 1 | This object is the name of the profile for this alarm or exception. |
1.3.6.1.4.1.149.2.3.15 | nhProblemStartTime | 1 | 1 | This object is the UTC time when the threshold was first crossed and that later resulted in an alarm or exception for that eleme… |
1.3.6.1.4.1.149.2.3.16 | nhProblemDuration | 1 | 1 | This object is the amount of time (in seconds) spent over the threshold since the problem start time (the time the threshold was… |