Vendor: Avaya
Module: XYLO-MIB-SMI (xylo.smi)
Type: OBJ ID
Access:
Syntax:
Automatically extracted from www.mibdepot.com
anxccpstats OBJECT IDENTIFIER ::= { annex 105 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.15.2.105.1 | anxPktsComp | 1 | 1 | This is the total number of packets that are successfully compressed by the compression card. |
| 1.3.6.1.4.1.15.2.105.2 | anxPktsDecomp | 1 | 1 | This is the total number of packets that are successfully decompressed by the compression card. |
| 1.3.6.1.4.1.15.2.105.3 | anxUncompPkts | 1 | 1 | This is the total number of packets that are received by CCP and are marked as being uncompressed packets (valid for MPPC). |
| 1.3.6.1.4.1.15.2.105.4 | anxPktsCompFails | 1 | 1 | Number of packets that failed to be compress due to data expansion or lack or resources. |
| 1.3.6.1.4.1.15.2.105.5 | anxPktsDataExpansion | 1 | 1 | Number of packets that failed to be compress due to data expansion. |
| 1.3.6.1.4.1.15.2.105.6 | anxPktsDecompFails | 1 | 1 | Number of packets that failed to decompress due to checksum errors, out of sequence errors or lack or resources. |
| 1.3.6.1.4.1.15.2.105.7 | anxLCBCRCMismatches | 1 | 1 | This is the total number of packets that failed to decompress due to LCB/CRC checksum mismatch or out of sequence errors. |
| 1.3.6.1.4.1.15.2.105.8 | anxCompResets | 1 | 1 | This is the total number of explicit compressor resets. |
| 1.3.6.1.4.1.15.2.105.9 | anxDecompResets | 1 | 1 | This is the total number of explicit decompressor resets. |
| 1.3.6.1.4.1.15.2.105.10 | anxHistoryFails | 1 | 1 | This is the total number of times we failed to allocate a history in the compression card CRAM memory for a session. |
| 1.3.6.1.4.1.15.2.105.11 | anxPktsDropFullQ | 1 | 1 | This is the total number of packets that got dropped because the hardware compression / decompression queue was full. |
| 1.3.6.1.4.1.15.2.105.12 | anxCompMbufFails | 1 | 1 | This is the total number of packets that failed to compress / decompress because of a lack of mbufs. |
| 1.3.6.1.4.1.15.2.105.13 | anxCompBefore | 1 | 1 | This is total number of bytes before compression. |
| 1.3.6.1.4.1.15.2.105.14 | anxCompAfter | 1 | 1 | This is total number of bytes after compression. |
| 1.3.6.1.4.1.15.2.105.15 | anxDecompBefore | 1 | 1 | This is total number of bytes before decompression. |
| 1.3.6.1.4.1.15.2.105.16 | anxDecompAfter | 1 | 1 | This is total number of bytes after decompression. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.15.2.1 | hw | 11 | 22 | None |
| 1.3.6.1.4.1.15.2.2 | sw | 29 | 58 | None |
| 1.3.6.1.4.1.15.2.3 | ports | 8 | 125 | None |
| 1.3.6.1.4.1.15.2.4 | parallelport | 2 | 12 | None |
| 1.3.6.1.4.1.15.2.5 | annexconfig | 105 | 215 | None |
| 1.3.6.1.4.1.15.2.6 | annexcmds | 11 | 22 | None |
| 1.3.6.1.4.1.15.2.7 | annexlatstats | 22 | 44 | None |
| 1.3.6.1.4.1.15.2.8 | interfacerip | 1 | 13 | None |
| 1.3.6.1.4.1.15.2.9 | anxsyncports | 7 | 33 | None |
| 1.3.6.1.4.1.15.2.10 | anxTrapHostInfo | 16 | 40 | None |
| 1.3.6.1.4.1.15.2.11 | anxt1 | 10 | 111 | None |
| 1.3.6.1.4.1.15.2.12 | anxpri | 2 | 350 | None |
| 1.3.6.1.4.1.15.2.13 | anxinterface | 2 | 56 | None |
| 1.3.6.1.4.1.15.2.14 | anxtunnelport | 1 | 10 | None |
| 1.3.6.1.4.1.15.2.15 | anxgrestats | 7 | 14 | None |
| 1.3.6.1.4.1.15.2.16 | callmgmt | 4 | 263 | None |
| 1.3.6.1.4.1.15.2.17 | ipsec | 2 | 15 | None |
| 1.3.6.1.4.1.15.2.100 | anxModem | 5 | 55 | None |
| 1.3.6.1.4.1.15.2.101 | anxchascommon | 3 | 6 | None |
| 1.3.6.1.4.1.15.2.102 | anxchas | 7 | 14 | None |
| 1.3.6.1.4.1.15.2.103 | radiusClient | 4 | 108 | None |
| 1.3.6.1.4.1.15.2.104 | anxgsystats | 7 | 14 | None |
| 1.3.6.1.4.1.15.2.106 | igmp | 1 | 25 | None |
| 1.3.6.1.4.1.15.2.107 | l2tp | 1 | 19 | None |
| 1.3.6.1.4.1.15.2.108 | anxPPPStats | 1 | 4 | None |
| 1.3.6.1.4.1.15.2.109 | ss7 | 9 | 22 | None |
| 1.3.6.1.4.1.15.2.110 | ntp | 10 | 37 | None |
| 1.3.6.1.4.1.15.2.111 | nfas | 9 | 23 | None |
| 1.3.6.1.4.1.15.2.112 | ippool | 14 | 37 | None |