Vendor: Xylogics, Inc.
Module: ANNEX-MIB
[Automatically extracted from oidview.com]
annexcmds OBJECT IDENTIFIER ::= { annex 6 }
annexcmds OBJECT IDENTIFIER ::= { annex 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.15.2.6.1 | anxcBoot | 1 | 1 | The type of boot to be performed. To initiate a dump, this parameter needs to be set by the management station. The values stored… |
| 1.3.6.1.4.1.15.2.6.2 | anxcBootImage | 1 | 1 | The name of the image file to be used with the boot command. |
| 1.3.6.1.4.1.15.2.6.3 | anxcBootTime | 1 | 1 | The time at which the next boot is scheduled in HH:MM format. |
| 1.3.6.1.4.1.15.2.6.4 | anxcBootMsg | 1 | 1 | The broadcast message to be displayed when the next boot is performed. |
| 1.3.6.1.4.1.15.2.6.5 | anxcReset | 1 | 1 | Writing a value to this object causes the annex to reset the appropriate subsystem. |
| 1.3.6.1.4.1.15.2.6.6 | anxcBcast | 1 | 1 | Writing a value to this object causes the annex to send the message in anxcBcastMsg to the specified port set. |
| 1.3.6.1.4.1.15.2.6.7 | anxcBcastMsg | 1 | 1 | The message to be broadcast to the Annex ports. |
| 1.3.6.1.4.1.15.2.6.8 | anxcResetSession | 1 | 1 | This command resets PRI session parameters blocks. The RA6300 will re-read the Session Parameter blocks from config.annex. Existi… |
| 1.3.6.1.4.1.15.2.6.9 | anxcResetDialout | 1 | 1 | Reset specific dialout routes using a range string. example: 1,3-5,8 will reset dialout routes 1,3,4,5,8. While 1,3-5,g,8 (g is b… |
| 1.3.6.1.4.1.15.2.6.10 | anxcResetWan1Chan | 1 | 1 | Resetting a particular channel on WAN 1. |
| 1.3.6.1.4.1.15.2.6.11 | anxcResetWan2Chan | 1 | 1 | Resetting a particular channel on WAN 2. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.15.2.1 | hw | 11 | 22 | None |
| 1.3.6.1.4.1.15.2.2 | sw | 29 | 58 | None |
| 1.3.6.1.4.1.15.2.3 | ports | 8 | 125 | None |
| 1.3.6.1.4.1.15.2.4 | parallelport | 2 | 12 | None |
| 1.3.6.1.4.1.15.2.5 | annexconfig | 105 | 215 | None |
| 1.3.6.1.4.1.15.2.7 | annexlatstats | 22 | 44 | None |
| 1.3.6.1.4.1.15.2.8 | interfacerip | 1 | 13 | None |
| 1.3.6.1.4.1.15.2.9 | anxsyncports | 7 | 33 | None |
| 1.3.6.1.4.1.15.2.10 | anxTrapHostInfo | 16 | 40 | None |
| 1.3.6.1.4.1.15.2.11 | anxt1 | 10 | 111 | None |
| 1.3.6.1.4.1.15.2.12 | anxpri | 2 | 350 | None |
| 1.3.6.1.4.1.15.2.13 | anxinterface | 2 | 56 | None |
| 1.3.6.1.4.1.15.2.14 | anxtunnelport | 1 | 10 | None |
| 1.3.6.1.4.1.15.2.15 | anxgrestats | 7 | 14 | None |
| 1.3.6.1.4.1.15.2.16 | callmgmt | 4 | 263 | None |
| 1.3.6.1.4.1.15.2.17 | ipsec | 2 | 15 | None |
| 1.3.6.1.4.1.15.2.100 | anxModem | 5 | 55 | None |
| 1.3.6.1.4.1.15.2.101 | anxchascommon | 3 | 6 | None |
| 1.3.6.1.4.1.15.2.102 | anxchas | 7 | 14 | None |
| 1.3.6.1.4.1.15.2.103 | radiusClient | 4 | 108 | None |
| 1.3.6.1.4.1.15.2.104 | anxgsystats | 7 | 14 | None |
| 1.3.6.1.4.1.15.2.105 | anxccpstats | 16 | 32 | None |
| 1.3.6.1.4.1.15.2.106 | igmp | 1 | 25 | None |
| 1.3.6.1.4.1.15.2.107 | l2tp | 1 | 19 | None |
| 1.3.6.1.4.1.15.2.108 | anxPPPStats | 1 | 4 | None |
| 1.3.6.1.4.1.15.2.109 | ss7 | 9 | 22 | None |
| 1.3.6.1.4.1.15.2.110 | ntp | 10 | 37 | None |
| 1.3.6.1.4.1.15.2.111 | nfas | 9 | 23 | None |
| 1.3.6.1.4.1.15.2.112 | ippool | 14 | 37 | None |