Indicates that this private MIB is fully compatible
with RFC 1155. For compatibility with previous
builds, the manager should consider that an error
of NOSUCHNAME on this object means that the 'old'
value applies, (meaning the enumeration of INTEGERs
are mostly zero-based instead of one-based).
Parsed from file flowpoint2.mib.txt
Company: None
Module: FLOWPOINT-MIB
Indicates that this private MIB is fully compatible
with RFC 1155. For compatibility with previous
builds, the manager should consider that an error
of NOSUCHNAME on this object means that the 'old'
value applies, (meaning the enumeration of INTEGERs
are mostly zero-based instead of one-based).
Parsed from file FLOWPOINT-MIB.mib
Module: FLOWPOINT-MIB
Vendor: FlowPoint Corporation
Module: FLOWPOINT-MIB
[Automatically extracted from oidview.com]
fpMIBCompatibility OBJECT-TYPE SYNTAX INTEGER { old(1), new(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates that this private MIB is fully compatible with RFC 1155. For compatibility with previous builds, the manager should consider that an error of NOSUCHNAME on this object means that the 'old' value applies, (meaning the enumeration of INTEGERs are mostly zero-based instead of one-based)." ::= { fpsys 16 }
fpMIBCompatibility OBJECT-TYPE SYNTAX INTEGER { old(1), new(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates that this private MIB is fully compatible with RFC 1155. For compatibility with previous builds, the manager should consider that an error of NOSUCHNAME on this object means that the 'old' value applies, (meaning the enumeration of INTEGERs are mostly zero-based instead of one-based)." ::= { fpsys 16 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1548.4.16.0 | fpMIBCompatibility | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1548.4.1 | fpSysName | 1 | 1 | An administratively-assigned name for this managed node. It will be the same name as the one defined in MIB2. |
1.3.6.1.4.1.1548.4.2 | fpSysMessage | 1 | 1 | An administratively-assigned message for this managed node. |
1.3.6.1.4.1.1548.4.3 | fpSysPassword | 1 | 1 | An administratively-assigned password for this managed node. The password will be used in the authentication phase of PPP. GENE… |
1.3.6.1.4.1.1548.4.4 | fpSysAuthen | 1 | 1 | An administratively-assigned authentication override type for this managed node. This is normally set to NONE, which means the no… |
1.3.6.1.4.1.1548.4.5 | fpSysOperation | 1 | 1 | Use this object to save/load the system configuration (only what is defined in this group) to/from FLASH memory, or perform other… |
1.3.6.1.4.1.1548.4.6 | fpSysSoftwareVer | 1 | 1 | Displays the software version run by the system. |
1.3.6.1.4.1.1548.4.7 | fpSysHardwareVer | 1 | 1 | Displays the system model number, revision and serial number. |
1.3.6.1.4.1.1548.4.8 | fpLoginPassword | 1 | 1 | Assign or change the administrator's password for login. Writing objects can only be performed when logged-in, using this passwo… |
1.3.6.1.4.1.1548.4.9 | fpWriteTimeout | 1 | 1 | None |
1.3.6.1.4.1.1548.4.10 | fpWriteTimer | 1 | 1 | This object retrieves the current security timer value. It returns how many minutes are left (if any) before a new login must be … |
1.3.6.1.4.1.1548.4.11 | fpCommunityName | 1 | 1 | To change or retrieve the SNMP community name. The default name is 'public'. |
1.3.6.1.4.1.1548.4.12 | fpInternetFireWall | 1 | 1 | To enable or disable the internet firewall filter. The filter discards any IP packet arriving from the WAN with a source IP addre… |
1.3.6.1.4.1.1548.4.13 | fpSysLogout | 1 | 1 | Writing to this object prevents any change from any SNMP manager (until logged in again). Changes from telnet and the console ar… |
1.3.6.1.4.1.1548.4.14 | fpIpxSupported | 1 | 1 | Indicates whether or not IPX is supported in the router software. For compatibility with previous non-IPX-capable builds, the ma… |
1.3.6.1.4.1.1548.4.15 | fpSysCallerIdTable | 1 | 2 | This table defines the types of connections for which CallerID information should be verified. |
1.3.6.1.4.1.1548.4.17 | fpPOTSInstalled | 1 | 1 | Indicates whether or not POTS hardware is installed AND is software supported. For compatibility with previous builds, the manag… |
1.3.6.1.4.1.1548.4.18 | fpSysLastLogEvent | 1 | 1 | The last system event reported to the console. This includes the timestamp, the subsystem and the actual text message of the even… |
1.3.6.1.4.1.1548.4.19 | fpSysSingleUser | 1 | 1 | This IP address used to define the single address to which IP translation was to occur (one client system at a time), or cancelli… |
1.3.6.1.4.1.1548.4.20 | fpSysYear | 1 | 1 | Set this object to specify the year for the real time clock, protected by a battery when the power is off. When all the related p… |
1.3.6.1.4.1.1548.4.21 | fpSysMonth | 1 | 1 | Set this object to specify the month for the real time clock, protected by a battery when the power is off. When all the related … |
1.3.6.1.4.1.1548.4.22 | fpSysDay | 1 | 1 | Set this object to specify the day for the real time clock, protected by a battery when the power is off. When all the related pa… |
1.3.6.1.4.1.1548.4.23 | fpSysHour | 1 | 1 | Set this object to specify the hour for the real time clock, protected by a battery when the power is off. When all the related p… |
1.3.6.1.4.1.1548.4.24 | fpSysMinute | 1 | 1 | Set this object to specify the minutes for the real time clock, protected by a battery when the power is off. When all the relate… |
1.3.6.1.4.1.1548.4.25 | fpSysSecond | 1 | 1 | Set this object to specify the seconds for the real time clock, protected by a battery when the power is off. When all the relate… |
1.3.6.1.4.1.1548.4.26 | fpSysDefaultSingleUser | 1 | 1 | Network Address Translation (NAT) and its ability to define server mappings (with sysIPTranslationServerTable) has rendered this … |
1.3.6.1.4.1.1548.4.27 | fpSysBootpRelay | 1 | 1 | This object allows to get or set the IP address of the DHCP/BOOTP Server when this router is acting as a Bootp relay agent. When… |
1.3.6.1.4.1.1548.4.28 | fpSysKernelRevision | 1 | 1 | This object represents the number of times that the source code got changed, possibly resulting in the support of new features. … |
1.3.6.1.4.1.1548.4.29 | fpSysTelnetPort | 1 | 1 | The TCP port for reception of telnet connections to the router. Setting this value to zero disables telnetting to the router. T… |
1.3.6.1.4.1.1548.4.30 | fpSysSNMPPort | 1 | 1 | The TCP port for reception of SNMP requests to the router. Setting this value to zero disables SNMP management of the router. T… |
1.3.6.1.4.1.1548.4.31 | fpWAN2WANForwarding | 1 | 1 | To enable or disable the forwarding of data traffic from one wan link to another wan link. |
1.3.6.1.4.1.1548.4.32 | fpUdpRelayTable | 1 | 5 | This table defines UDP ports for which relaying should should be performed when this UDP traffic is broadcast. |
1.3.6.1.4.1.1548.4.33 | fpOneWANConnection | 1 | 1 | To enable or disable the bringing up of more than one wan link at a time to different destinations. |
1.3.6.1.4.1.1548.4.34 | fpSysHTTPPort | 1 | 1 | The TCP port for reception of HTTP requests to the router. Setting this value to zero disables HTTP management of the router. T… |
1.3.6.1.4.1.1548.4.35 | fpDirectedBroadcasts | 1 | 1 | Enable/disable directed broadcasts to a directly connected interface. |
1.3.6.1.4.1.1548.4.36 | fpBlockNetBIOSDefault | 1 | 1 | To set the default when a new remote is created that controls if the remote will block NetBIOS traffic. |
1.3.6.1.4.1.1548.4.37 | fpSysFlashAvailable | 1 | 1 | This object represents the number of bytes of flash available in the flash file system. |
1.3.6.1.4.1.1548.4.38 | fpVoiceTable | 1 | 3 | This table defines voice ports for voice routers. |
1.3.6.1.4.1.1548.4.39 | fpEchoTable | 1 | 3 | This table defines echo ports. |
1.3.6.1.4.1.1548.4.40 | fpOptionTable | 1 | 4 | This table defines Kernel Options. |