Vendor: Timeplex
Module: STMIB
[Automatically extracted from oidview.com]
recfBundleEntry OBJECT-TYPE SYNTAX RecfBundleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { recfBundleAddr } ::= { recfBundleTable 1 }
recfBundleEntry OBJECT-TYPE SYNTAX RecfBundleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { recfBundleAddr } ::= { recfBundleTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.16.101.1.2.1.7.1.1 | recfBundleAddr | 0 | 0 | Parameter Type = Internal. |
1.3.6.1.4.1.16.101.1.2.1.7.1.2 | recfBundleStartMode | 0 | 0 | Parameter Type = Intrusive. Setting to erase will fail if the bundle has an unremoved INL or a channel that is not disconnected. O… |
1.3.6.1.4.1.16.101.1.2.1.7.1.3 | recfBundleUpdate | 0 | 0 | Parameter Type = Internal. |
1.3.6.1.4.1.16.101.1.2.1.7.1.4 | recfBundleSignaling | 0 | 0 | Parameter Type = Intrusive. |
1.3.6.1.4.1.16.101.1.2.1.7.1.5 | recfBundleOOSBitPattern | 0 | 0 | Parameter Type = Intrusive. |
1.3.6.1.4.1.16.101.1.2.1.7.1.6 | recfBundleOOSASignaling | 0 | 0 | Parameter Type = Intrusive. |
1.3.6.1.4.1.16.101.1.2.1.7.1.7 | recfBundleOOSBSignaling | 0 | 0 | Parameter Type = Intrusive. |
1.3.6.1.4.1.16.101.1.2.1.7.1.8 | recfBundleOOSCDSignaling | 0 | 0 | Parameter Type = Intrusive. |
1.3.6.1.4.1.16.101.1.2.1.7.1.9 | recfBundleNullIdlePattern | 0 | 0 | Parameter Type = Intrusive. |
1.3.6.1.4.1.16.101.1.2.1.7.1.10 | recfBundleBwCntIdlePattern | 0 | 0 | Parameter Type = Intrusive. Bit pattern output to equipment indicating bundle availability. T1M bundles will have a default patter… |
1.3.6.1.4.1.16.101.1.2.1.7.1.11 | recfBundleBusyOutTimer | 0 | 0 | Parameter Type = Intrusive. |
1.3.6.1.4.1.16.101.1.2.1.7.1.12 | recfBundleSeizureTime | 0 | 0 | Parameter Type = Non-intrusive. For bandwidth contention channel. |
1.3.6.1.4.1.16.101.1.2.1.7.1.13 | recfBundlePreemptionTime | 0 | 0 | Parameter Type = Non-intrusive. For bandwidth contention channel. |
1.3.6.1.4.1.16.101.1.2.1.7.1.14 | recfBundleOrgDisconnectTime | 0 | 0 | Parameter Type = Non-intrusive. For bandwidth contention channel. Units that start with 's' are in units of 1/10 seconds (i.e., s1… |
1.3.6.1.4.1.16.101.1.2.1.7.1.15 | recfBundleAttenuationRx | 0 | 0 | Parameter Type = Intrusive. For voice channel. |
1.3.6.1.4.1.16.101.1.2.1.7.1.16 | recfBundleAttenuationTx | 0 | 0 | Parameter Type = Intrusive. For voice channel. |
1.3.6.1.4.1.16.101.1.2.1.7.1.17 | recfBundleType | 0 | 0 | Parameter Type = Intrusive. |
1.3.6.1.4.1.16.101.1.2.1.7.1.18 | recfBundleINLNumber | 0 | 0 | Parameter Type = Internal. Applicable only if recfBundleType is set to inl. |
1.3.6.1.4.1.16.101.1.2.1.7.1.19 | recfBundleDeviceType | 0 | 0 | Parameter Type = Non-intrusive. This field indicates the type of device connected to the port. Values 1-10 and 255 are reserved by… |
1.3.6.1.4.1.16.101.1.2.1.7.1.20 | recfBundleContentionSet | 0 | 0 | Parameter Type = Intrusive. If bundle type is not bandwidth contention, this field is ignored. This field defines the type of cont… |
1.3.6.1.4.1.16.101.1.2.1.7.1.21 | recfBundlePartitionID | 0 | 0 | Parameter Type = Intrusive. |
1.3.6.1.4.1.16.101.1.2.1.7.1.22 | recfBundleBwCntBusyPattern | 0 | 0 | Parameter Type = Intrusive. Bit pattern output to equipment indicating bundle busy. If the value is oos, then the busy pattern will… |
1.3.6.1.4.1.16.101.1.2.1.7.1.23 | recfBundleSigInversion | 0 | 0 | Parameter Type = Intrusive. INTRODUCED 2.0.0 For an E1M bundle, the meanings of these values are reversed. That is, if this paramet… |
1.3.6.1.4.1.16.101.1.2.1.7.1.24 | recfBundleDataPolarity | 0 | 0 | Parameter Type = Intrusive. INTRODUCED 2.0.0 The default value must be used unless specific user equipment explicitly requires data… |
1.3.6.1.4.1.16.101.1.2.1.7.1.25 | recfBundlePCMLaw | 0 | 0 | Parameter Type = Intrusive. INTRODUCED 2.0.0 The values specify the following setup: E1M - a_Law E1M … |