Reference record for OID 1.3.6.1.4.1.16.101.1.2.1.7.1.23



parent
1.3.6.1.4.1.16.101.1.2.1.7.1 (recfBundleEntry)
node code
23
node name
recfBundleSigInversion
dot oid
1.3.6.1.4.1.16.101.1.2.1.7.1.23
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) unisys-timeplex(16) synchrony(101) st50(1) resource(2) reConfig(1) recfBundleTable(7) recfBundleEntry(1) recfBundleSigInversion(23)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) unisys(16) synchrony(101) st50(1) resource(2) reConfig(1) recfBundleTable(7) recfBundleEntry(1) recfBundleSigInversion(23)}
  • ...skipped...
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) perc(16) synchrony(101) st50(1) resource(2) reConfig(1) recfBundleTable(7) recfBundleEntry(1) recfBundleSigInversion(23)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) ami(16) synchrony(101) st50(1) resource(2) reConfig(1) recfBundleTable(7) recfBundleEntry(1) recfBundleSigInversion(23)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) unisys-timeplex(16) synchrony(101) st50(1) resource(2) reConfig(1) recfBundleTable(7) recfBundleEntry(1) recfBundleSigInversion(23)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) unisys(16) synchrony(101) st50(1) resource(2) reConfig(1) recfBundleTable(7) recfBundleEntry(1) recfBundleSigInversion(23)}
  • ...skipped...
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) perc(16) synchrony(101) st50(1) resource(2) reConfig(1) recfBundleTable(7) recfBundleEntry(1) recfBundleSigInversion(23)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) ami(16) synchrony(101) st50(1) resource(2) reConfig(1) recfBundleTable(7) recfBundleEntry(1) recfBundleSigInversion(23)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/unisys-timeplex/synchrony/st50/resource/reConfig/recfBundleTable/recfBundleEntry/recfBundleSigInversion
  • /iso/identified-organization/dod/internet/private/enterprise/unisys/synchrony/st50/resource/reConfig/recfBundleTable/recfBundleEntry/recfBundleSigInversion
  • ...skipped...
  • /iso/org/dod/internet/private/enterprise/perc/synchrony/st50/resource/reConfig/recfBundleTable/recfBundleEntry/recfBundleSigInversion
  • /iso/org/dod/internet/private/enterprise/ami/synchrony/st50/resource/reConfig/recfBundleTable/recfBundleEntry/recfBundleSigInversion
  • /iso/org/dod/internet/private/enterprises/unisys-timeplex/synchrony/st50/resource/reConfig/recfBundleTable/recfBundleEntry/recfBundleSigInversion
  • /iso/org/dod/internet/private/enterprises/unisys/synchrony/st50/resource/reConfig/recfBundleTable/recfBundleEntry/recfBundleSigInversion
  • ...skipped...
  • /iso/iso-identified-organization/dod/internet/private/enterprises/perc/synchrony/st50/resource/reConfig/recfBundleTable/recfBundleEntry/recfBundleSigInversion
  • /iso/iso-identified-organization/dod/internet/private/enterprises/ami/synchrony/st50/resource/reConfig/recfBundleTable/recfBundleEntry/recfBundleSigInversion
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/16/101/1/2/1/7/1/23

    Description by mibdepot

    Parameter Type = Intrusive.

    INTRODUCED 2.0.0

    For an E1M bundle, the meanings of these
    values are reversed. That is, if this
    parameter is set as normal, the ABCD signal
    polarity will be inverted on the ST bus.
    If it is set as inverted, the ABCD signal
    polarity will NOT be inverted on the ST bus.

    Contention channel connect/disconnect will
    be affected by this filed:

    a) For a T1M bundle set as normal or
    an E1M bundle set as inverted:

    If recfBundleContentionSet is set as E&M:
    Connections are initiated when the incoming
    A bit is set to 1.
    Disconnections are triggered when the incoming
    A bit is set to 0.

    If recfBundleContentionSet is set as FXS:
    Connections are initiated when the incoming
    A bit is set to 1.
    Disconnections are triggered when the incoming
    A bit is set to 0.

    If recfBundleContentionSet is set as FXO:
    Connections are initiated when the incoming
    B bit is set to 0.
    Before FXS answers the call, disconnections
    will be triggered when the B bit is set to 1.

    If recfBundleContentionSet is set as FXS-ARD:
    Connections are initiated when the incoming
    A bit is set to 0.
    Disconnections are triggered when the incoming
    A bit is a 1.

    b) For a T1M bundle set as inverted or
    an E1M bundle set as normal:

    If recfBundleContentionSet is set as E&M:
    Connections are initiated when the incoming
    A bit is set to 0.
    Disconnections are triggered when the incoming
    A bit is set to 1.

    If recfBundleContentionSet is set as FXS:
    Connections are initiated when the incoming
    A bit is set to 0.
    Disconnections are triggered when the incoming
    A bit is set to 1.

    If recfBundleContentionSet is set as FXO:
    Connections are initiated when the incoming
    B bit is set to 1.
    Before FXS answers the call, disconnections
    will be triggered when the B bit is set to 0.

    If recfBundleContentionSet is set as FXS-ARD:
    Connections are initiated when the incoming
    A bit is set to 1.
    Disconnections are triggered when the incoming
    A bit is set to 0.

    Parsed from file STMIB.mib.txt
    Company: None
    Module: STMIB

    Description by circitor

    Parameter Type = Intrusive.

    INTRODUCED 2.0.0

    For an E1M bundle, the meanings of these
    values are reversed. That is, if this
    parameter is set as normal, the ABCD signal
    polarity will be inverted on the ST bus.
    If it is set as inverted, the ABCD signal
    polarity will NOT be inverted on the ST bus.

    Contention channel connect/disconnect will
    be affected by this filed:

    a) For a T1M bundle set as normal or
    an E1M bundle set as inverted:

    If recfBundleContentionSet is set as E&M:
    Connections are initiated when the incoming
    A bit is set to 1.
    Disconnections are triggered when the incoming
    A bit is set to 0.

    If recfBundleContentionSet is set as FXS:
    Connections are initiated when the incoming
    A bit is set to 1.
    Disconnections are triggered when the incoming
    A bit is set to 0.

    If recfBundleContentionSet is set as FXO:
    Connections are initiated when the incoming
    B bit is set to 0.
    Before FXS answers the call, disconnections
    will be triggered when the B bit is set to 1.

    If recfBundleContentionSet is set as FXS-ARD:
    Connections are initiated when the incoming
    A bit is set to 0.
    Disconnections are triggered when the incoming
    A bit is a 1.

    b) For a T1M bundle set as inverted or
    an E1M bundle set as normal:

    If recfBundleContentionSet is set as E&M:
    Connections are initiated when the incoming
    A bit is set to 0.
    Disconnections are triggered when the incoming
    A bit is set to 1.

    If recfBundleContentionSet is set as FXS:
    Connections are initiated when the incoming
    A bit is set to 0.
    Disconnections are triggered when the incoming
    A bit is set to 1.

    If recfBundleContentionSet is set as FXO:
    Connections are initiated when the incoming
    B bit is set to 1.
    Before FXS answers the call, disconnections
    will be triggered when the B bit is set to 0.

    If recfBundleContentionSet is set as FXS-ARD:
    Connections are initiated when the incoming
    A bit is set to 1.
    Disconnections are triggered when the incoming
    A bit is set to 0.

    Parsed from file STMIB.mib
    Module: STMIB

    Information by oid_info

    Vendor: Timeplex
    Module: STMIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    recfBundleSigInversion 	OBJECT-TYPE
		SYNTAX    INTEGER {
			  normal(1),
			  inverted(2)
			  }
		ACCESS    read-write
		STATUS    mandatory
		DESCRIPTION "Parameter Type = Intrusive.

			INTRODUCED 2.0.0

   			For an E1M bundle, the meanings of these
			values are reversed. That is, if this
			parameter is  set as normal, the ABCD signal
			polarity will be inverted on the ST bus.
	 		If it is set as inverted, the ABCD signal
			polarity will NOT be inverted on the ST bus.

   			Contention channel connect/disconnect will
			be affected by this filed:

	  		a) For a T1M bundle set as normal or
			   an E1M bundle set as inverted:

			If recfBundleContentionSet is set as E&M:
		       	Connections are initiated when the incoming
			A bit is set to 1.
		       	Disconnections are triggered when the incoming
		       	A bit is set to 0.

		   	If recfBundleContentionSet is set as FXS:
		       	Connections are initiated when the incoming
			A bit is set to 1.
		       	Disconnections are triggered when the incoming
		       	A bit is set to 0.

		   	If recfBundleContentionSet is set as FXO:
		       	Connections are initiated when the incoming
			B bit is set to 0.
			Before FXS answers the call, disconnections
		       	will be triggered when the B bit is set to 1.

		   	If recfBundleContentionSet is set as FXS-ARD:
		       	Connections are initiated when the incoming
			A bit is set to 0.
			Disconnections are triggered when the incoming
 			A bit is a 1.

			b) For a T1M bundle set as inverted or
			   an E1M bundle set as normal:

			If recfBundleContentionSet is set as E&M:
		       	Connections are initiated when the incoming
			A bit is set to 0.
		       	Disconnections are triggered when the incoming
		       	A bit is set to 1.

		   	If recfBundleContentionSet is set as FXS:
		       	Connections are initiated when the incoming
			A bit is set to 0.
		       	Disconnections are triggered when the incoming
		       	A bit is set to 1.

		   	If recfBundleContentionSet is set as FXO:
		       	Connections are initiated when the incoming
			B bit is set to 1.
			Before FXS answers the call, disconnections
		       	will be triggered when the B bit is set to 0.

		   	If recfBundleContentionSet is set as FXS-ARD:
		       	Connections are initiated when the incoming
			A bit is set to 1.
			Disconnections are triggered when the incoming
			A bit is set to 0."
		DEFVAL { normal }
		::= { recfBundleEntry 23 }

    Information by circitor

    recfBundleSigInversion 	OBJECT-TYPE
		SYNTAX    INTEGER {
			  normal(1),
			  inverted(2)
			  }
		ACCESS    read-write
		STATUS    mandatory
		DESCRIPTION "Parameter Type = Intrusive.

			INTRODUCED 2.0.0

   			For an E1M bundle, the meanings of these
			values are reversed. That is, if this
			parameter is  set as normal, the ABCD signal
			polarity will be inverted on the ST bus.
	 		If it is set as inverted, the ABCD signal
			polarity will NOT be inverted on the ST bus.

   			Contention channel connect/disconnect will
			be affected by this filed:

	  		a) For a T1M bundle set as normal or
			   an E1M bundle set as inverted:

			If recfBundleContentionSet is set as E&M:
		       	Connections are initiated when the incoming
			A bit is set to 1.
		       	Disconnections are triggered when the incoming
		       	A bit is set to 0.

		   	If recfBundleContentionSet is set as FXS:
		       	Connections are initiated when the incoming
			A bit is set to 1.
		       	Disconnections are triggered when the incoming
		       	A bit is set to 0.

		   	If recfBundleContentionSet is set as FXO:
		       	Connections are initiated when the incoming
			B bit is set to 0.
			Before FXS answers the call, disconnections
		       	will be triggered when the B bit is set to 1.

		   	If recfBundleContentionSet is set as FXS-ARD:
		       	Connections are initiated when the incoming
			A bit is set to 0.
			Disconnections are triggered when the incoming
 			A bit is a 1.

			b) For a T1M bundle set as inverted or
			   an E1M bundle set as normal:

			If recfBundleContentionSet is set as E&M:
		       	Connections are initiated when the incoming
			A bit is set to 0.
		       	Disconnections are triggered when the incoming
		       	A bit is set to 1.

		   	If recfBundleContentionSet is set as FXS:
		       	Connections are initiated when the incoming
			A bit is set to 0.
		       	Disconnections are triggered when the incoming
		       	A bit is set to 1.

		   	If recfBundleContentionSet is set as FXO:
		       	Connections are initiated when the incoming
			B bit is set to 1.
			Before FXS answers the call, disconnections
		       	will be triggered when the B bit is set to 0.

		   	If recfBundleContentionSet is set as FXS-ARD:
		       	Connections are initiated when the incoming
			A bit is set to 1.
			Disconnections are triggered when the incoming
			A bit is set to 0."
		DEFVAL { normal }
		::= { recfBundleEntry 23 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.16)

    Laura Bridge

    Brothers (24)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.16.101.1.2.1.7.1.1 recfBundleAddr 0 0 Parameter Type = Internal.
    1.3.6.1.4.1.16.101.1.2.1.7.1.2 recfBundleStartMode 0 0 Parameter Type = Intrusive.
    Setting to erase will fail if the bundle
    has an unremoved INL or a channel that
    is not disconnected. O…
    1.3.6.1.4.1.16.101.1.2.1.7.1.3 recfBundleUpdate 0 0 Parameter Type = Internal.
    1.3.6.1.4.1.16.101.1.2.1.7.1.4 recfBundleSignaling 0 0 Parameter Type = Intrusive.
    1.3.6.1.4.1.16.101.1.2.1.7.1.5 recfBundleOOSBitPattern 0 0 Parameter Type = Intrusive.
    1.3.6.1.4.1.16.101.1.2.1.7.1.6 recfBundleOOSASignaling 0 0 Parameter Type = Intrusive.
    1.3.6.1.4.1.16.101.1.2.1.7.1.7 recfBundleOOSBSignaling 0 0 Parameter Type = Intrusive.
    1.3.6.1.4.1.16.101.1.2.1.7.1.8 recfBundleOOSCDSignaling 0 0 Parameter Type = Intrusive.
    1.3.6.1.4.1.16.101.1.2.1.7.1.9 recfBundleNullIdlePattern 0 0 Parameter Type = Intrusive.
    1.3.6.1.4.1.16.101.1.2.1.7.1.10 recfBundleBwCntIdlePattern 0 0 Parameter Type = Intrusive.
    Bit pattern output to equipment
    indicating bundle availability.

    T1M bundles will have a default patter…
    1.3.6.1.4.1.16.101.1.2.1.7.1.11 recfBundleBusyOutTimer 0 0 Parameter Type = Intrusive.
    1.3.6.1.4.1.16.101.1.2.1.7.1.12 recfBundleSeizureTime 0 0 Parameter Type = Non-intrusive.
    For bandwidth contention channel.
    1.3.6.1.4.1.16.101.1.2.1.7.1.13 recfBundlePreemptionTime 0 0 Parameter Type = Non-intrusive.
    For bandwidth contention channel.
    1.3.6.1.4.1.16.101.1.2.1.7.1.14 recfBundleOrgDisconnectTime 0 0 Parameter Type = Non-intrusive.
    For bandwidth contention channel. Units that
    start with 's' are in units of 1/10 seconds
    (i.e., s1…
    1.3.6.1.4.1.16.101.1.2.1.7.1.15 recfBundleAttenuationRx 0 0 Parameter Type = Intrusive.
    For voice channel.
    1.3.6.1.4.1.16.101.1.2.1.7.1.16 recfBundleAttenuationTx 0 0 Parameter Type = Intrusive.
    For voice channel.
    1.3.6.1.4.1.16.101.1.2.1.7.1.17 recfBundleType 0 0 Parameter Type = Intrusive.
    1.3.6.1.4.1.16.101.1.2.1.7.1.18 recfBundleINLNumber 0 0 Parameter Type = Internal.
    Applicable only if recfBundleType is
    set to inl.
    1.3.6.1.4.1.16.101.1.2.1.7.1.19 recfBundleDeviceType 0 0 Parameter Type = Non-intrusive.
    This field indicates the type of device
    connected to the port.

    Values 1-10 and 255 are reserved by…
    1.3.6.1.4.1.16.101.1.2.1.7.1.20 recfBundleContentionSet 0 0 Parameter Type = Intrusive.
    If bundle type is not bandwidth contention,
    this field is ignored.

    This field defines the type of cont…
    1.3.6.1.4.1.16.101.1.2.1.7.1.21 recfBundlePartitionID 0 0 Parameter Type = Intrusive.
    1.3.6.1.4.1.16.101.1.2.1.7.1.22 recfBundleBwCntBusyPattern 0 0 Parameter Type = Intrusive.
    Bit pattern output to equipment
    indicating bundle busy.

    If the value is oos, then the busy
    pattern will…
    1.3.6.1.4.1.16.101.1.2.1.7.1.24 recfBundleDataPolarity 0 0 Parameter Type = Intrusive.

    INTRODUCED 2.0.0

    The default value must be used unless
    specific user equipment explicitly
    requires data…
    1.3.6.1.4.1.16.101.1.2.1.7.1.25 recfBundlePCMLaw 0 0 Parameter Type = Intrusive.

    INTRODUCED 2.0.0

    The values specify the following setup:
    - T1M - u_Law
    E1M - a_Law
    - T1M - a_Law
    E1M …