An attribute defining the desired Mask state of an alarm .
no - unmask (this command is not saved in agent's common
database)
noAndSave - unmask ; this command is saved in agent's
common database
yes - mask (this command is not saved in agent's
common database)
yesAndSave - mask ; this command is saved in
agent's common database.
Commands that are not saved, will be lost upon power-up or
selected card removal.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
An attribute defining the desired Mask state of an alarm .
no - unmask (this command is not saved in agent's common
database)
noAndSave - unmask ; this command is saved in agent's
common database
yes - mask (this command is not saved in agent's
common database)
yesAndSave - mask ; this command is saved in
agent's common database.
Commands that are not saved, will be lost upon power-up or
selected card removal.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications Ltd.
Module: DACS-MIB
[Automatically extracted from oidview.com]
agnCnfgAlrMask OBJECT-TYPE SYNTAX INTEGER { no (1), noAndSave (2), yes (3), yesAndSave (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "An attribute defining the desired Mask state of an alarm . no - unmask (this command is not saved in agent's common database) noAndSave - unmask ; this command is saved in agent's common database yes - mask (this command is not saved in agent's common database) yesAndSave - mask ; this command is saved in agent's common database. Commands that are not saved, will be lost upon power-up or selected card removal. " ::= { agnCnfgAlrEntry 4 }
agnCnfgAlrMask OBJECT-TYPE SYNTAX INTEGER { no (1), noAndSave (2), yes (3), yesAndSave (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "An attribute defining the desired Mask state of an alarm . no - unmask (this command is not saved in agent's common database) noAndSave - unmask ; this command is saved in agent's common database yes - mask (this command is not saved in agent's common database) yesAndSave - mask ; this command is saved in agent's common database. Commands that are not saved, will be lost upon power-up or selected card removal. " ::= { agnCnfgAlrEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.1 | agnCnfgAlrCode | 0 | 0 | The alarm code. The following attributes refer this code. |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.2 | agnCnfgAlrSlot | 0 | 0 | The alarm slot. The following attributes apply for the alarm code and slot selected. all = the attributes apply to all slots. notA… |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.3 | agnCnfgAlrPort | 0 | 0 | The alarm port. The following attributes apply for the alarm code,slot and port selected. 200 = all = the attributes apply to all… |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.5 | agnCnfgAlrInvert | 0 | 0 | An attribute defining the desired Invert state of an alarm . no - not inverted. yes - inverted. For MP, it is not applicable for… |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.6 | agnCnfgAlrFilter | 0 | 0 | An attribute defining if Filter is desired for the alarm . no - no filter. yes - filter activate. This filter is activated withi… |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.7 | agnCnfgAlrFilterSet | 0 | 0 | This is a top threshold causing the alarm that passes it, to be declared Set (ON) at the end of the respective window of time. - F… |
| 1.3.6.1.4.1.164.3.1.2.2.8.2.1.8 | agnCnfgAlrFilterReset | 0 | 0 | This is a bottom threshold causing the alarm that does not pass it, to be declared Reset (ON) at the end of the respective window… |