Reference record for OID 1.3.6.1.4.1.164.3.1.6.7.1.1



parent
1.3.6.1.4.1.164.3.1.6.7.1 (ip2IfTable)
node code
1
node name
ip2IfEntry
dot oid
1.3.6.1.4.1.164.3.1.6.7.1.1
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radWan(3) wanGen(1) diverseIfWanGen(6) ip2If(7) ip2IfTable(1) ip2IfEntry(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radWan(3) wanGen(1) diverseIfWanGen(6) ip2If(7) ip2IfTable(1) ip2IfEntry(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radWan(3) wanGen(1) diverseIfWanGen(6) ip2If(7) ip2IfTable(1) ip2IfEntry(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radWan(3) wanGen(1) diverseIfWanGen(6) ip2If(7) ip2IfTable(1) ip2IfEntry(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radWan(3) wanGen(1) diverseIfWanGen(6) ip2If(7) ip2IfTable(1) ip2IfEntry(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radWan(3) wanGen(1) diverseIfWanGen(6) ip2If(7) ip2IfTable(1) ip2IfEntry(1)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/rad/radWan/wanGen/diverseIfWanGen/ip2If/ip2IfTable/ip2IfEntry
  • /iso/identified-organization/dod/internet/private/enterprises/rad/radWan/wanGen/diverseIfWanGen/ip2If/ip2IfTable/ip2IfEntry
  • /iso/org/dod/internet/private/enterprise/rad/radWan/wanGen/diverseIfWanGen/ip2If/ip2IfTable/ip2IfEntry
  • /iso/org/dod/internet/private/enterprises/rad/radWan/wanGen/diverseIfWanGen/ip2If/ip2IfTable/ip2IfEntry
  • /iso/iso-identified-organization/dod/internet/private/enterprise/rad/radWan/wanGen/diverseIfWanGen/ip2If/ip2IfTable/ip2IfEntry
  • /iso/iso-identified-organization/dod/internet/private/enterprises/rad/radWan/wanGen/diverseIfWanGen/ip2If/ip2IfTable/ip2IfEntry

    • Description by mibdepot

    Application layer configuration per link

    Parsed from file Rad0485.MIB.txt
    Company: None
    Module: OPTIMUX-MIB

    Description by circitor

    Application layer configuration per link

    Parsed from file OPTIMUX-MIB.mib
    Module: OPTIMUX-MIB

    Information by mibdepot

    ip2IfEntry OBJECT-TYPE
       SYNTAX Ip2IfEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
          "Application layer configuration per link"
       INDEX   { ip2IfChannelIndex }
       ::= { ip2IfTable 1 }

    Information by circitor

    ip2IfEntry OBJECT-TYPE
       SYNTAX Ip2IfEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
          "Application layer configuration per link"
       INDEX   { ip2IfChannelIndex }
       ::= { ip2IfTable 1 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.164)

    Brighitte Shalom

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.164)

    Smadar Tauber

    Children (48)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.164.3.1.6.7.1.1.1 ip2IfChannelIndex 0 0 The channel index, which is actualy the bundle ID.
    1.3.6.1.4.1.164.3.1.6.7.1.1.2 ip2IfRowStatus 0 0 This parameter allows NMS to create/delete entries of this table.
    1.3.6.1.4.1.164.3.1.6.7.1.1.3 ip2IfOperStatus 0 0 The actual link status.
    remoteFail - No Rx.
    localFail - No Tx.
    unavailable - No echo replay or replay with invalid code or when c…
    1.3.6.1.4.1.164.3.1.6.7.1.1.4 ip2IfAdminStatus 0 0 The desired state of the link.
    1.3.6.1.4.1.164.3.1.6.7.1.1.5 ip2IfDestAddr 0 0 The destination IP address.
    1.3.6.1.4.1.164.3.1.6.7.1.1.6 ip2IfNextHop 0 0 The next hop to which the frame should be sent.
    Default value - 0.0.0.0.
    Upon setting the default value the frame is sent
    to the d…
    1.3.6.1.4.1.164.3.1.6.7.1.1.7 ip2IfDestPort 0 0 The destination Bundle at the far-end device.
    1.3.6.1.4.1.164.3.1.6.7.1.1.8 ip2IfMacAddr 0 0 The Destination MAC address of the next hop or
    destination station.
    1.3.6.1.4.1.164.3.1.6.7.1.1.9 ip2IfJitterBuffer 0 0 The maximum cell arrival jitter in 10 usec that the
    reassembly process will tolerate in the cell stream,
    without producing errors…
    1.3.6.1.4.1.164.3.1.6.7.1.1.10 ip2IfTos 0 0 The TOS (Type of Service) value: 0..255.
    1.3.6.1.4.1.164.3.1.6.7.1.1.11 ip2IfTDMBytesInFrame 0 0 The number of TDM bytes to be placed in a single IP
    frame payload.
    1.3.6.1.4.1.164.3.1.6.7.1.1.12 ip2IfVlanSupport 0 0 VLAN support (Tagging).
    no - No support to VLAN.
    yes - 4 VLAN bytes will be added to the frame.
    1.3.6.1.4.1.164.3.1.6.7.1.1.13 ip2IfVlanIdentifier 0 0 VLAN ID.
    1.3.6.1.4.1.164.3.1.6.7.1.1.14 ip2IfVlanFramePriority 0 0 VLAN Frame priority.
    1.3.6.1.4.1.164.3.1.6.7.1.1.15 ip2IfExitPort 0 0 This object determines to which external port the traffic
    will be sent.
    auto - the device will decide automatically the exit port.
    1.3.6.1.4.1.164.3.1.6.7.1.1.16 ip2IfVoiceOos 0 0 Voice Out-Of-Service code. Valid range: (0 - FF HEX).
    For agents that do not support this feature, the value will
    always be 0.
    1.3.6.1.4.1.164.3.1.6.7.1.1.17 ip2IfDataOos 0 0 Data Out-Of-Service code. Valid range: (0 - FF HEX).
    For agents that do not support this feature, the value will
    always be 0.
    1.3.6.1.4.1.164.3.1.6.7.1.1.18 ip2IfBundleUsage 0 0 The Bundle Resource usage in Kbps.
    1.3.6.1.4.1.164.3.1.6.7.1.1.19 ip2IfOAM 0 0 This parameter determine the OAM configuration.
    The LSB (Bit 0 the most right one) is used for OAM connectivity.
    Values: 0 = disa…
    1.3.6.1.4.1.164.3.1.6.7.1.1.20 ip2IfTDMoIpMode 0 0 The TDMoIP Mode configuration. Static- means TS can Tx any time.
    dynamicLES - means TS can Tx only when line is enabled accordin…
    1.3.6.1.4.1.164.3.1.6.7.1.1.21 ip2IfTimeElapsed 0 0 The number of seconds that have elapsed since
    the beginning of the current error-measurement period.
    If, for some reason, such a…
    1.3.6.1.4.1.164.3.1.6.7.1.1.22 ip2IfValidIntervals 0 0 The number of previous intervals for which data was collected.
    The value will be 96 unless the interface was brought online with…
    1.3.6.1.4.1.164.3.1.6.7.1.1.23 ip2IfFarEndType 0 0 This object defines the type of the Far-End device.
    This data is important for signaling.
    1.3.6.1.4.1.164.3.1.6.7.1.1.24 ip2IfRdnState 0 0 This object defines the role this bundle plays in the redundancy scheme:
    none(2) - means this bundle is not part of redundancy p…
    1.3.6.1.4.1.164.3.1.6.7.1.1.25 ip2IfSourceAddr 0 0 Source IP Address of the bundle.
    1.3.6.1.4.1.164.3.1.6.7.1.1.26 ip2IfBandWidth 0 0 Number of Time Slots in The Bundle.
    For T1 the value will be: 1..24
    For E1 the value will be: 1..31
    For T3 the value will be: 1..…
    1.3.6.1.4.1.164.3.1.6.7.1.1.27 ip2IfMeasuredSilence 0 0 This object shows the percentage of Silence that was measured by the device
    for the current bundle.
    Relevant values: 0..100, 255.…
    1.3.6.1.4.1.164.3.1.6.7.1.1.28 ip2IfPayloadType 0 0 This object defines the TDMoIP payload type.
    1.3.6.1.4.1.164.3.1.6.7.1.1.29 ip2IfProtocolVersion 0 0 This object defines the TDMoIP protocol Version.
    1.3.6.1.4.1.164.3.1.6.7.1.1.30 ip2IfTdmBackUpNextHop 0 0 Defines the TDM bundle default router in case there was a switch from the Primary Link
    (for example an ETH port) to a TDM backup…
    1.3.6.1.4.1.164.3.1.6.7.1.1.31 ip2IfOosTxEnable 0 0 This object defines whether OOS will be Transmitted.
    Note that for IPmux1000 the Lbit is always sent,
    but the OOS will be sent ac…
    1.3.6.1.4.1.164.3.1.6.7.1.1.32 ip2IfConnCheckPktFrequency 0 0 Time in sec. between 2 Bundle Connectivity Check packets.
    Valid values: 0..60. 0 = Not Applicable.
    1.3.6.1.4.1.164.3.1.6.7.1.1.33 ip2IfConnPktTimeOutCycles 0 0 No. of cycles the agent will send Bundle Connectivity packets without receiving
    a response from the remote device before declari…
    1.3.6.1.4.1.164.3.1.6.7.1.1.34 ip2IfMfRelay 0 0 Multi Frequency Signaling Detection.
    1.3.6.1.4.1.164.3.1.6.7.1.1.35 ip2IfTxGain 0 0 Transmit gain in dBm.
    1.3.6.1.4.1.164.3.1.6.7.1.1.36 ip2IfSuperTandem 0 0 The Super Tandem feature provides end to end compression over multiple hops,
    solving the double compression problem detected in …
    1.3.6.1.4.1.164.3.1.6.7.1.1.37 ip2IfSrcPort 0 0 The source Bundle at the local device,
    this parameter used for cases where there is no match
    between ip2IfChannelIndex and the So…
    1.3.6.1.4.1.164.3.1.6.7.1.1.38 ip2IfModemCalls 0 0 This MIB object shows whether Modem Calls are enabled via the bundle.
    relay option (3) means that the bundle will send to the ne…
    1.3.6.1.4.1.164.3.1.6.7.1.1.39 ip2IfMinPulseWidth 0 0 Indicates the minimum width in milliseconds of the MF (Multi Frequency)
    tone transmitted by the switch.
    Valid values: 45-300 msec…
    1.3.6.1.4.1.164.3.1.6.7.1.1.40 ip2IfMinPowerLevel 0 0 Indicates the minimum power level in dBm of the MF (Multi Frequency)
    tone transmitted by the switch.
    Valid values: -1...-35 dBm.
    1.3.6.1.4.1.164.3.1.6.7.1.1.41 ip2IfEchoCanceler 0 0 Echo canceler activation.
    1.3.6.1.4.1.164.3.1.6.7.1.1.42 ip2IfCodingLaw 0 0 This attribute indicates the Method/Law for decoding/encoding the voice
    information.
    aLaw(1) is the standard Law for E1 links.
    uLa…
    1.3.6.1.4.1.164.3.1.6.7.1.1.43 ip2IfCustomToneDetect 0 0 Custom Tone Detection (COT) is a Control operation of a 2Khz tone detector.
    This tone is sent between PBX devices in order to ch…
    1.3.6.1.4.1.164.3.1.6.7.1.1.44 ip2IfCallerIdDelay 0 0 Time in msec between CLID (Caller ID) signal detection on the line and CLID
    signal transmission. The CLID must be sent between r…
    1.3.6.1.4.1.164.3.1.6.7.1.1.45 ip2IfConnectivityMode 0 0 This MIB object shows whether to send Pings or OAM frames over the bundle.
    1.3.6.1.4.1.164.3.1.6.7.1.1.53 ip2IfMfcSpoofing 0 0 This MIB object defines whether the MFC (Multi Frequency Compelled) protocol
    spoofing will exist in the bundle. When the MFC Spo…
    1.3.6.1.4.1.164.3.1.6.7.1.1.54 ip2IfToneAckInterval 0 0 Time Interval in milli seconds from the time a Vmux sends tone/s to a local PBX until
    it receives an acknowledgement from this P…
    1.3.6.1.4.1.164.3.1.6.7.1.1.56 ip2IfNoiseLevelForVAD 0 0 This object defines the Level of Noise on the line,
    the Voice Activation Detector (VAD) will have to handle.