This object selects the size of the user data channel buffer
FIFO used in the DTE2 mode. In the other modes, buffer
size is automatically set by the DACS agent.
Buffer FIFO size in bits, corresponds to FIFO lengths of
+/-16, +/-30, +/-52, +/-72 bits.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
This object selects the size of the user data channel buffer
FIFO used in the DTE2 mode. In the other modes, buffer
size is automatically set by the DACS agent.
Buffer FIFO size in bits, corresponds to FIFO lengths of
+/-16, +/-30, +/-52, +/-72 bits.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications Ltd.
Module: DACS-MIB
[Automatically extracted from oidview.com]
prtHSFifoSize OBJECT-TYPE SYNTAX INTEGER { auto (1), b32bit (2), b60bit (3), b104bit (4), b144bit (5), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object selects the size of the user data channel buffer FIFO used in the DTE2 mode. In the other modes, buffer size is automatically set by the DACS agent. Buffer FIFO size in bits, corresponds to FIFO lengths of +/-16, +/-30, +/-52, +/-72 bits." ::= { prtHSParamEntry 5}
prtHSFifoSize OBJECT-TYPE SYNTAX INTEGER { auto (1), b32bit (2), b60bit (3), b104bit (4), b144bit (5), notApplicable (255) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object selects the size of the user data channel buffer FIFO used in the DTE2 mode. In the other modes, buffer size is automatically set by the DACS agent. Buffer FIFO size in bits, corresponds to FIFO lengths of +/-16, +/-30, +/-52, +/-72 bits." ::= { prtHSParamEntry 5}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.3.3.3.3.1.1.1 | prtHSCnfgIdx | 0 | 0 | This attribute indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.2 | prtHSPrtIdx | 0 | 0 | This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed car… |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.3 | prtHSSlt | 0 | 0 | This attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this o… |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.4 | prtHSRate | 0 | 0 | This object indicates the port rate (speed). auto - rate is selected automatically by system. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.6 | prtHSClkMode | 0 | 0 | Clock Mode of the user data channel. dce - DACS operates as a DCE and provides transmit and receive clocks to the synchronous use… |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.7 | prtHSCTS | 0 | 0 | Selection of CTS line state in the user data channel. on - CTS continuously ON. rts - CTS line follows the RTS line. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.8 | prtHSRtsState | 0 | 0 | RTS state of the port. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.9 | prtHSInbandLoopback | 0 | 0 | This object indicates if Inband Loopback from the Network should be enabled or disabled. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.10 | prtHSInbandLoopPatternCfg | 0 | 0 | This object indicates if Inband Loop polynomial pattern will be according to RDL Loop (the standard) or User Configurated accordi… |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.11 | prtHSInbandLoopActPattern | 0 | 0 | This object is a binary string of up to 8 bits. Though the syntax allows for any ASCII characters, for this object only '0' or '1… |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.12 | prtHSInbandLoopDeactPattern | 0 | 0 | This object is a binary string of up to 8 bits. Though the syntax allows for any ASCII characters, for this object only '0' or '1… |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.13 | prtHSDCD | 0 | 0 | Selection of DCD line state in the user data channel. linkOK - DCD line is ON only when active link is OK. on - DCD continuously… |