This parameter can be used for different purposes:
- TELNET session time-out in seconds.
- Ace20: when trying to create row in a table that already
has row with the same values, if set of values has to be unique
in table, this attribute is set to the index of the existing row.
- Optimux-T3: when CH interfaces are RJ-45, user can select via this
object, the interface type for each Group of channels: T1 or E1:
The selection will be a sum of the following Bits.
'0' = T1
'1' = E1
Bit Group Value for each Bit having '1'
1 1 (CH-1..CH-8) 1
2 2 (CH-9..CH-12) 2
3 3 (CH-13..CH-20) 4
4 4 (CH-21..CH-28) 8
Examples:
15 = all Groups are selected to be E1
6 = Group 2 and Group 3 are selected to be E1
(Group 1 and Group 4 are T1).
- FCD-A, FCD-M: user can select via this object the configuration
used for Get values of MSDSL parameters that don't have
configuration index.
1 =active configuration
255=temporary configuration.
Set of this object should be done before Getting the MSDSL
RW parameters.
- Ace2002: This parameter indicates the number of intervals that
were successfully uploaded upon statistics collection session.
- FCD-IP, WR, FCD-IPD, LA-240:
This parameter indicates whether Telnet Access is enabled/disabled:
Values:
2 - Telnet Access is Disabled.
3 - Telnet Access is Enabled.
- Vmux-110: This parameter value equals maximum number of bundles.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
This parameter can be used for different purposes:
- TELNET session time-out in seconds.
- Ace20: when trying to create row in a table that already
has row with the same values, if set of values has to be unique
in table, this attribute is set to the index of the existing row.
- Optimux-T3: when CH interfaces are RJ-45, user can select via this
object, the interface type for each Group of channels: T1 or E1:
The selection will be a sum of the following Bits.
'0' = T1
'1' = E1
Bit Group Value for each Bit having '1'
1 1 (CH-1..CH-8) 1
2 2 (CH-9..CH-12) 2
3 3 (CH-13..CH-20) 4
4 4 (CH-21..CH-28) 8
Examples:
15 = all Groups are selected to be E1
6 = Group 2 and Group 3 are selected to be E1
(Group 1 and Group 4 are T1).
- FCD-A, FCD-M: user can select via this object the configuration
used for Get values of MSDSL parameters that don't have
configuration index.
1 =active configuration
255=temporary configuration.
Set of this object should be done before Getting the MSDSL
RW parameters.
- Ace2002: This parameter indicates the number of intervals that
were successfully uploaded upon statistics collection session.
- FCD-IP, WR, FCD-IPD, LA-240:
This parameter indicates whether Telnet Access is enabled/disabled:
Values:
2 - Telnet Access is Disabled.
3 - Telnet Access is Enabled.
- Vmux-110: This parameter value equals maximum number of bundles.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications Ltd.
Module: DACS-MIB
[Automatically extracted from oidview.com]
systemParameter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter can be used for different purposes: - TELNET session time-out in seconds. - Ace20: when trying to create row in a table that already has row with the same values, if set of values has to be unique in table, this attribute is set to the index of the existing row. - Optimux-T3: when CH interfaces are RJ-45, user can select via this object, the interface type for each Group of channels: T1 or E1: The selection will be a sum of the following Bits. '0' = T1 '1' = E1 Bit Group Value for each Bit having '1' 1 1 (CH-1..CH-8) 1 2 2 (CH-9..CH-12) 2 3 3 (CH-13..CH-20) 4 4 4 (CH-21..CH-28) 8 Examples: 15 = all Groups are selected to be E1 6 = Group 2 and Group 3 are selected to be E1 (Group 1 and Group 4 are T1). - FCD-A, FCD-M: user can select via this object the configuration used for Get values of MSDSL parameters that don't have configuration index. 1 =active configuration 255=temporary configuration. Set of this object should be done before Getting the MSDSL RW parameters. - Ace2002: This parameter indicates the number of intervals that were successfully uploaded upon statistics collection session. - FCD-IP, WR, FCD-IPD, LA-240: This parameter indicates whether Telnet Access is enabled/disabled: Values: 2 - Telnet Access is Disabled. 3 - Telnet Access is Enabled. - Vmux-110: This parameter value equals maximum number of bundles." ::= { agnt 18 }
systemParameter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter can be used for different purposes: - TELNET session time-out in seconds. - Ace20: when trying to create row in a table that already has row with the same values, if set of values has to be unique in table, this attribute is set to the index of the existing row. - Optimux-T3: when CH interfaces are RJ-45, user can select via this object, the interface type for each Group of channels: T1 or E1: The selection will be a sum of the following Bits. '0' = T1 '1' = E1 Bit Group Value for each Bit having '1' 1 1 (CH-1..CH-8) 1 2 2 (CH-9..CH-12) 2 3 3 (CH-13..CH-20) 4 4 4 (CH-21..CH-28) 8 Examples: 15 = all Groups are selected to be E1 6 = Group 2 and Group 3 are selected to be E1 (Group 1 and Group 4 are T1). - FCD-A, FCD-M: user can select via this object the configuration used for Get values of MSDSL parameters that don't have configuration index. 1 =active configuration 255=temporary configuration. Set of this object should be done before Getting the MSDSL RW parameters. - Ace2002: This parameter indicates the number of intervals that were successfully uploaded upon statistics collection session. - FCD-IP, WR, FCD-IPD, LA-240: This parameter indicates whether Telnet Access is enabled/disabled: Values: 2 - Telnet Access is Disabled. 3 - Telnet Access is Enabled. - Vmux-110: This parameter value equals maximum number of bundles." ::= { agnt 18 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.6.2.18.0 | systemParameter | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.6.2.1 | agnHwVersion | 1 | 1 | ASCII string for description and display of the agent hardware version, as it is known by the agent software.The user can update… |
| 1.3.6.1.4.1.164.6.2.2 | agnTrapMask | 1 | 1 | The value of this attribute determines the type of traps the agent should mask and not send to the management console. The value … |
| 1.3.6.1.4.1.164.6.2.3 | agnTrapValue | 1 | 1 | The value of the trap decoded in internal RAD format. Full description is given in the Trap definition file |
| 1.3.6.1.4.1.164.6.2.4 | agnChangeCnt | 1 | 1 | The number of changes in system configuration that were reported to the manager since last cold start |
| 1.3.6.1.4.1.164.6.2.5 | agnSpecific | 1 | 1 | Object identifier of entity containing additional information regarding this instance. |
| 1.3.6.1.4.1.164.6.2.6 | agnConfigMsg | 1 | 1 | Full configuration message coded in internal RAD application format. This entry describes agent's configuration. For MP-2200 R3,… |
| 1.3.6.1.4.1.164.6.2.7 | mngTrapIpTable | 1 | 5 | This table indicates the destination address of the traps. Internally it will be limited to ten addresses. |
| 1.3.6.1.4.1.164.6.2.8 | agnIndication | 1 | 1 | Attribute describing the state of the entity the agent is responsible for. In case of a modular entity, the value of this attrib… |
| 1.3.6.1.4.1.164.6.2.9 | agnMonitorModeCmd | 1 | 1 | Setting this attribute to ON, will enforce the agent to change its mode of operation to Monitor Mode |
| 1.3.6.1.4.1.164.6.2.10 | agnLed | 1 | 1 | This entry specifies the LEDs status of the agent module . Each led will be represented by 4 bits where the first 2 bits (left… |
| 1.3.6.1.4.1.164.6.2.11 | trapTable | 1 | 4 | This table includes the last few traps generated by the agent, for future retrieval. The table has a limited capacity. If traps … |
| 1.3.6.1.4.1.164.6.2.12 | fileTransfer | 12 | 39 | None |
| 1.3.6.1.4.1.164.6.2.13 | systemReset | 1 | 1 | Reset action to be performed on the system. |
| 1.3.6.1.4.1.164.6.2.14 | systemTiming | 2 | 4 | None |
| 1.3.6.1.4.1.164.6.2.15 | systemPort | 6 | 65 | None |
| 1.3.6.1.4.1.164.6.2.16 | systemResetAllStatsCmd | 1 | 1 | Reset statistics of all ports and connections of the device. |
| 1.3.6.1.4.1.164.6.2.17 | systemClearTablesCmd | 1 | 1 | tempCnfgTables - Set *RowStatus = destroy for all entries of some tables having *RowStatus object, for temporary configuration on… |
| 1.3.6.1.4.1.164.6.2.19 | agnGlobalAlarmMask | 1 | 1 | The value of this attribute determines the alarm traps the agent should mask and not send to the managers. Each bit from a certai… |
| 1.3.6.1.4.1.164.6.2.20 | alarmSeverity | 1 | 1 | This object specifies the severity of the alarms. |
| 1.3.6.1.4.1.164.6.2.21 | alarmState | 1 | 1 | . |
| 1.3.6.1.4.1.164.6.2.22 | agnTestStatus | 1 | 1 | Indicates the current test status (for all levels: system, card, port). This attribute will be set to: on(3): when there is at lea… |
| 1.3.6.1.4.1.164.6.2.23 | systemSaveAndResetAllStatsCmd | 1 | 1 | on - a command to Save data of Current Period in Last Period data-set and start a new counting period for Current Period. off - … |
| 1.3.6.1.4.1.164.6.2.24 | systemDefaultGateway | 1 | 1 | Default Gateway's IP Address. |
| 1.3.6.1.4.1.164.6.2.25 | systemPsTable | 1 | 6 | This table describes the PS types of a device. Usage of this table is specified in the device's NMS SRS |
| 1.3.6.1.4.1.164.6.2.26 | agnFans | 1 | 1 | This entry specifies the FANs existence and status. Each fan will be represented by 2 bits, where the first bit (right) will spec… |
| 1.3.6.1.4.1.164.6.2.27 | agnSendTrapParameter | 1 | 1 | This object specifies if the agent will attach a specific parameter to a trap. For ACE2002 the agent will attach or not the open… |
| 1.3.6.1.4.1.164.6.2.30 | xcIndexNext | 1 | 1 | This object contains an appropriate value to be used for xcIndex when creating entries in the xcTable. The value 0 indicates that… |
| 1.3.6.1.4.1.164.6.2.31 | xcTable | 1 | 10 | Configuration of system cross-connect entries. The table follows the behavior described in RFC 2515, RFC 1604 regarding the creat… |
| 1.3.6.1.4.1.164.6.2.32 | systemModule | 1 | 7 | None |
| 1.3.6.1.4.1.164.6.2.33 | agnNearFarConnection | 1 | 1 | This parameter describes the connection between near-end and far-end agents. |
| 1.3.6.1.4.1.164.6.2.34 | agnAccess | 1 | 2 | None |