This object contains an appropriate value to
be used for xcIndex when creating
entries in the xcTable. The value
0 indicates that no unassigned entries are
available. To obtain the xcIndex
value for a new entry, the manager issues a
management protocol retrieval operation to obtain
the current value of this object. After each
retrieval, the agent should modify the value to
the next unassigned index.
After a manager retrieves a value the agent will
determine through its local policy when this index
value will be made available for reuse.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
This object contains an appropriate value to
be used for xcIndex when creating
entries in the xcTable. The value
0 indicates that no unassigned entries are
available. To obtain the xcIndex
value for a new entry, the manager issues a
management protocol retrieval operation to obtain
the current value of this object. After each
retrieval, the agent should modify the value to
the next unassigned index.
After a manager retrieves a value the agent will
determine through its local policy when this index
value will be made available for reuse.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
xcIndexNext OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for xcIndex when creating entries in the xcTable. The value 0 indicates that no unassigned entries are available. To obtain the xcIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { agnt 30 }
xcIndexNext OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for xcIndex when creating entries in the xcTable. The value 0 indicates that no unassigned entries are available. To obtain the xcIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { agnt 30 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.164.6.2.30.0 | xcIndexNext | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.164.6.2.1 | agnHwVersion | 1 | 1 | ASCII string for description and display of the agent hardware version, as it is known by the agent software.The user can update… |
1.3.6.1.4.1.164.6.2.2 | agnTrapMask | 1 | 1 | The value of this attribute determines the type of traps the agent should mask and not send to the management console. The value … |
1.3.6.1.4.1.164.6.2.3 | agnTrapValue | 1 | 1 | The value of the trap decoded in internal RAD format. Full description is given in the Trap definition file |
1.3.6.1.4.1.164.6.2.4 | agnChangeCnt | 1 | 1 | The number of changes in system configuration that were reported to the manager since last cold start |
1.3.6.1.4.1.164.6.2.5 | agnSpecific | 1 | 1 | Object identifier of entity containing additional information regarding this instance. |
1.3.6.1.4.1.164.6.2.6 | agnConfigMsg | 1 | 1 | Full configuration message coded in internal RAD application format. This entry describes agent's configuration. For MP-2200 R3,… |
1.3.6.1.4.1.164.6.2.7 | mngTrapIpTable | 1 | 5 | This table indicates the destination address of the traps. Internally it will be limited to ten addresses. |
1.3.6.1.4.1.164.6.2.8 | agnIndication | 1 | 1 | Attribute describing the state of the entity the agent is responsible for. In case of a modular entity, the value of this attrib… |
1.3.6.1.4.1.164.6.2.9 | agnMonitorModeCmd | 1 | 1 | Setting this attribute to ON, will enforce the agent to change its mode of operation to Monitor Mode |
1.3.6.1.4.1.164.6.2.10 | agnLed | 1 | 1 | This entry specifies the LEDs status of the agent module . Each led will be represented by 4 bits where the first 2 bits (left… |
1.3.6.1.4.1.164.6.2.11 | trapTable | 1 | 4 | This table includes the last few traps generated by the agent, for future retrieval. The table has a limited capacity. If traps … |
1.3.6.1.4.1.164.6.2.12 | fileTransfer | 12 | 39 | None |
1.3.6.1.4.1.164.6.2.13 | systemReset | 1 | 1 | Reset action to be performed on the system. |
1.3.6.1.4.1.164.6.2.14 | systemTiming | 2 | 4 | None |
1.3.6.1.4.1.164.6.2.15 | systemPort | 6 | 65 | None |
1.3.6.1.4.1.164.6.2.16 | systemResetAllStatsCmd | 1 | 1 | Reset statistics of all ports and connections of the device. |
1.3.6.1.4.1.164.6.2.17 | systemClearTablesCmd | 1 | 1 | tempCnfgTables - Set *RowStatus = destroy for all entries of some tables having *RowStatus object, for temporary configuration on… |
1.3.6.1.4.1.164.6.2.18 | systemParameter | 1 | 1 | This parameter can be used for different purposes: - TELNET session time-out in seconds. - Ace20: when trying to create row in a … |
1.3.6.1.4.1.164.6.2.19 | agnGlobalAlarmMask | 1 | 1 | The value of this attribute determines the alarm traps the agent should mask and not send to the managers. Each bit from a certai… |
1.3.6.1.4.1.164.6.2.20 | alarmSeverity | 1 | 1 | This object specifies the severity of the alarms. |
1.3.6.1.4.1.164.6.2.21 | alarmState | 1 | 1 | . |
1.3.6.1.4.1.164.6.2.22 | agnTestStatus | 1 | 1 | Indicates the current test status (for all levels: system, card, port). This attribute will be set to: on(3): when there is at lea… |
1.3.6.1.4.1.164.6.2.23 | systemSaveAndResetAllStatsCmd | 1 | 1 | on - a command to Save data of Current Period in Last Period data-set and start a new counting period for Current Period. off - … |
1.3.6.1.4.1.164.6.2.24 | systemDefaultGateway | 1 | 1 | Default Gateway's IP Address. |
1.3.6.1.4.1.164.6.2.25 | systemPsTable | 1 | 6 | This table describes the PS types of a device. Usage of this table is specified in the device's NMS SRS |
1.3.6.1.4.1.164.6.2.26 | agnFans | 1 | 1 | This entry specifies the FANs existence and status. Each fan will be represented by 2 bits, where the first bit (right) will spec… |
1.3.6.1.4.1.164.6.2.27 | agnSendTrapParameter | 1 | 1 | This object specifies if the agent will attach a specific parameter to a trap. For ACE2002 the agent will attach or not the open… |
1.3.6.1.4.1.164.6.2.31 | xcTable | 1 | 10 | Configuration of system cross-connect entries. The table follows the behavior described in RFC 2515, RFC 1604 regarding the creat… |
1.3.6.1.4.1.164.6.2.32 | systemModule | 1 | 7 | None |
1.3.6.1.4.1.164.6.2.33 | agnNearFarConnection | 1 | 1 | This parameter describes the connection between near-end and far-end agents. |
1.3.6.1.4.1.164.6.2.34 | agnAccess | 1 | 2 | None |