This parameter is not applicable for PU with Local XID handling.
Legal values:
1 - Do not initiate an XID message.
2 - Initiate an XID message to LLC2.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
This parameter is not applicable for PU with Local XID handling.
Legal values:
1 - Do not initiate an XID message.
2 - Initiate an XID message to LLC2.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications
Module: RAD-MIB (rad-mib.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
pktSwchSnaPULlc2FrXIDInitiationA OBJECT-TYPE SYNTAX INTEGER{ notInitiate(1), initiate(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is not applicable for PU with Local XID handling. Legal values: 1 - Do not initiate an XID message. 2 - Initiate an XID message to LLC2." ::= { pktSwchSnaPULlc2FrEntryA 13}
pktSwchSnaPULlc2FrXIDInitiationA OBJECT-TYPE SYNTAX INTEGER{ notInitiate(1), initiate(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is not applicable for PU with Local XID handling. Legal values: 1 - Do not initiate an XID message. 2 - Initiate an XID message to LLC2." ::= { pktSwchSnaPULlc2FrEntryA 13}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.164.8.11.12.1.1 | pktSwchSnaPULlc2FrNumberA | 0 | 0 | Unique Identifier for this PU. The value in this field is used as a common Key in both this table and the Main PU table. |
1.3.6.1.4.1.164.8.11.12.1.2 | pktSwchSnaPULlc2FrSideA | 0 | 0 | Indicates for each side (SIDE-A and SIDE-B) if the Protocol Interface for that side has been defined or not. |
1.3.6.1.4.1.164.8.11.12.1.3 | pktSwchSnaPULlc2FrEncapsTypeA | 0 | 0 | Indicates if the LLC2/RFC1490 Protocol Interface uses the BNN, BAN or TREN method of Frame Encapsulation. |
1.3.6.1.4.1.164.8.11.12.1.4 | pktSwchSnaPULlc2FrDestMACA | 0 | 0 | The LLC2 Destination MAC Address. |
1.3.6.1.4.1.164.8.11.12.1.5 | pktSwchSnaPULlc2FrSrcSAPA | 0 | 0 | The LLC2 Source SAP Address. |
1.3.6.1.4.1.164.8.11.12.1.6 | pktSwchSnaPULlc2FrDestSAPA | 0 | 0 | The LLC2 Destination SAP. |
1.3.6.1.4.1.164.8.11.12.1.7 | pktSwchSnaPULlc2FrXIDIdBlkA | 0 | 0 | Part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The IDBLK is required for PU with Local XID handl… |
1.3.6.1.4.1.164.8.11.12.1.8 | pktSwchSnaPULlc2FrXIDIdNumA | 0 | 0 | Second part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The IDNUM is required for PU with Local XI… |
1.3.6.1.4.1.164.8.11.12.1.9 | pktSwchSnaPULlc2FrMaxPiuSizeA | 0 | 0 | Maximum Path Information Size |
1.3.6.1.4.1.164.8.11.12.1.10 | pktSwchSnaPULlc2FrTxWindowA | 0 | 0 | The LLC2 Link Window Size. |
1.3.6.1.4.1.164.8.11.12.1.11 | pktSwchSnaPULlc2FrLinkA | 0 | 0 | The SPS Frame Relay Link Number which this LLC2 Protocol Interface is associated with. |
1.3.6.1.4.1.164.8.11.12.1.12 | pktSwchSnaPULlc2FrDLCIA | 0 | 0 | The SPS Frame Relay DLCI Number which this LLC2 Protocol Interface is associated with. |
1.3.6.1.4.1.164.8.11.12.1.14 | pktSwchSnaPULlc2FrN2CountA | 0 | 0 | N2 Count |
1.3.6.1.4.1.164.8.11.12.1.15 | pktSwchSnaPULlc2FrT1TimerA | 0 | 0 | T1 Timer in 1/10 of a second. |
1.3.6.1.4.1.164.8.11.12.1.16 | pktSwchSnaPULlc2FrTiTimerA | 0 | 0 | TI Timer in seconds |