Second part of the IBM device ID (the full ID is defined by the IDBLK and
the IDNUM). The IDNUM is required for PU with Local XID handling
or PU with End-to-End XID handling, NO Support for NON-Activation XID.
Up to 5 Hexadecimal digits, format: 0X XX XX.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
Second part of the IBM device ID (the full ID is defined by the IDBLK and
the IDNUM). The IDNUM is required for PU with Local XID handling
or PU with End-to-End XID handling, NO Support for NON-Activation XID.
Up to 5 Hexadecimal digits, format: 0X XX XX.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications
Module: RAD-MIB (rad-mib.mib)
Type: TABULAR
Access: read-only
Syntax: OCTET STRING
( SIZE (
1..3 ) )
Automatically extracted from www.mibdepot.com
pktSwchSnaPULlc2FrXIDIdNumA OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..3)) MAX-ACCESS read-only STATUS current DESCRIPTION "Second part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The IDNUM is required for PU with Local XID handling or PU with End-to-End XID handling, NO Support for NON-Activation XID. Up to 5 Hexadecimal digits, format: 0X XX XX." ::= {pktSwchSnaPULlc2FrEntryA 8}
pktSwchSnaPULlc2FrXIDIdNumA OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..3)) MAX-ACCESS read-only STATUS current DESCRIPTION "Second part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The IDNUM is required for PU with Local XID handling or PU with End-to-End XID handling, NO Support for NON-Activation XID. Up to 5 Hexadecimal digits, format: 0X XX XX." ::= {pktSwchSnaPULlc2FrEntryA 8}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.164.8.11.12.1.1 | pktSwchSnaPULlc2FrNumberA | 0 | 0 | Unique Identifier for this PU. The value in this field is used as a common Key in both this table and the Main PU table. |
1.3.6.1.4.1.164.8.11.12.1.2 | pktSwchSnaPULlc2FrSideA | 0 | 0 | Indicates for each side (SIDE-A and SIDE-B) if the Protocol Interface for that side has been defined or not. |
1.3.6.1.4.1.164.8.11.12.1.3 | pktSwchSnaPULlc2FrEncapsTypeA | 0 | 0 | Indicates if the LLC2/RFC1490 Protocol Interface uses the BNN, BAN or TREN method of Frame Encapsulation. |
1.3.6.1.4.1.164.8.11.12.1.4 | pktSwchSnaPULlc2FrDestMACA | 0 | 0 | The LLC2 Destination MAC Address. |
1.3.6.1.4.1.164.8.11.12.1.5 | pktSwchSnaPULlc2FrSrcSAPA | 0 | 0 | The LLC2 Source SAP Address. |
1.3.6.1.4.1.164.8.11.12.1.6 | pktSwchSnaPULlc2FrDestSAPA | 0 | 0 | The LLC2 Destination SAP. |
1.3.6.1.4.1.164.8.11.12.1.7 | pktSwchSnaPULlc2FrXIDIdBlkA | 0 | 0 | Part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The IDBLK is required for PU with Local XID handl… |
1.3.6.1.4.1.164.8.11.12.1.9 | pktSwchSnaPULlc2FrMaxPiuSizeA | 0 | 0 | Maximum Path Information Size |
1.3.6.1.4.1.164.8.11.12.1.10 | pktSwchSnaPULlc2FrTxWindowA | 0 | 0 | The LLC2 Link Window Size. |
1.3.6.1.4.1.164.8.11.12.1.11 | pktSwchSnaPULlc2FrLinkA | 0 | 0 | The SPS Frame Relay Link Number which this LLC2 Protocol Interface is associated with. |
1.3.6.1.4.1.164.8.11.12.1.12 | pktSwchSnaPULlc2FrDLCIA | 0 | 0 | The SPS Frame Relay DLCI Number which this LLC2 Protocol Interface is associated with. |
1.3.6.1.4.1.164.8.11.12.1.13 | pktSwchSnaPULlc2FrXIDInitiationA | 0 | 0 | This parameter is not applicable for PU with Local XID handling. Legal values: 1 - Do not initiate an XID message. 2 - Initiate an… |
1.3.6.1.4.1.164.8.11.12.1.14 | pktSwchSnaPULlc2FrN2CountA | 0 | 0 | N2 Count |
1.3.6.1.4.1.164.8.11.12.1.15 | pktSwchSnaPULlc2FrT1TimerA | 0 | 0 | T1 Timer in 1/10 of a second. |
1.3.6.1.4.1.164.8.11.12.1.16 | pktSwchSnaPULlc2FrTiTimerA | 0 | 0 | TI Timer in seconds |