The status of this PU Qllc table entry.
In order to save this entry, set status to valid.
An underCreation value is set by the Agent when this entry is updated.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
The status of this PU Qllc table entry.
In order to save this entry, set status to valid.
An underCreation value is set by the Agent when this entry is updated.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications
Module: RAD-MIB (rad-mib.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
pktSwchSnaPUX25QllcEntryStatusS OBJECT-TYPE SYNTAX INTEGER { valid(1), underCreation(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this PU Qllc table entry. In order to save this entry, set status to valid. An underCreation value is set by the Agent when this entry is updated." ::= {pktSwchSnaPUX25QllcEntryS 13}
pktSwchSnaPUX25QllcEntryStatusS OBJECT-TYPE SYNTAX INTEGER { valid(1), underCreation(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this PU Qllc table entry. In order to save this entry, set status to valid. An underCreation value is set by the Agent when this entry is updated." ::= {pktSwchSnaPUX25QllcEntryS 13}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.164.8.11.8.1.1 | pktSwchSnaPUX25QllcNumberS | 0 | 0 | This parameter defines an identifier associated with the PU Entry X25\QLLC side, which is unique within the SPS |
1.3.6.1.4.1.164.8.11.8.1.2 | pktSwchSnaPUX25QllcSideS | 0 | 0 | Is there side A or B of the PU connection |
1.3.6.1.4.1.164.8.11.8.1.3 | pktSwchSnaPUX25QllcIdBlkS | 0 | 0 | Part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The Idblk is required for secondary PU with Local… |
1.3.6.1.4.1.164.8.11.8.1.4 | pktSwchSnaPUX25QllcIdNumS | 0 | 0 | Second part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The Idnum is required for secondary PU wit… |
1.3.6.1.4.1.164.8.11.8.1.5 | pktSwchSnaPUX25QllcXIDInitS | 0 | 0 | This parameter is not applicable for PU with Local XID handling. Legal values: 1 - Do not initiate an XID message. 2 - Initiate an… |
1.3.6.1.4.1.164.8.11.8.1.6 | pktSwchSnaPUX25QllcMaxPiuSizeS | 0 | 0 | Maximum Path Information Size |
1.3.6.1.4.1.164.8.11.8.1.7 | pktSwchSnaPUX25QllcStationAddressS | 0 | 0 | QLLC PU Link Station Address. Range: 0x01-0xFE. This parameter is applicable only for PU with End-to-End XID handling, Support fo… |
1.3.6.1.4.1.164.8.11.8.1.8 | pktSwchSnaPUX25QllcInPasswordS | 0 | 0 | A field matched with the call user data in call request packets for purposes of security and correlation. |
1.3.6.1.4.1.164.8.11.8.1.9 | pktSwchSnaPUX25QllcSubAddressS | 0 | 0 | The X.25 Sub-address associated with the PU Entry for routing incoming call indications. Range: 0-99. |
1.3.6.1.4.1.164.8.11.8.1.10 | pktSwchSnaPUX25QllcAutoCallS | 0 | 0 | This parameter indicates whether the SPS automatically initiates an X.25 call request or not. |
1.3.6.1.4.1.164.8.11.8.1.11 | pktSwchSnaPUX25QllcCalledAddressS | 0 | 0 | The destination x.25 DTE address to which the SPS calls. Used with AutoCall only. |
1.3.6.1.4.1.164.8.11.8.1.12 | pktSwchSnaPUX25QllcCallUserDataFacilitiesS | 0 | 0 | The X.25 facilities and Call User Data which the SPS uses on outgoing calls. AutoCall only. Up to 60 Hexa-Decimal digits. Each pai… |