QLLC PU Link Station Address. Range: 0x01-0xFE.
This parameter is applicable only for PU with End-to-End XID handling,
Support for NON-Activation XID.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
QLLC PU Link Station Address. Range: 0x01-0xFE.
This parameter is applicable only for PU with End-to-End XID handling,
Support for NON-Activation XID.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications
Module: RAD-MIB (rad-mib.mib)
Type: TABULAR
Access: read-write
Syntax: OCTET STRING
( SIZE (
1 ) )
Automatically extracted from www.mibdepot.com
pktSwchSnaPUX25QllcStationAddressS OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-write STATUS current DESCRIPTION "QLLC PU Link Station Address. Range: 0x01-0xFE. This parameter is applicable only for PU with End-to-End XID handling, Support for NON-Activation XID." ::= {pktSwchSnaPUX25QllcEntryS 7}
pktSwchSnaPUX25QllcStationAddressS OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-write STATUS current DESCRIPTION "QLLC PU Link Station Address. Range: 0x01-0xFE. This parameter is applicable only for PU with End-to-End XID handling, Support for NON-Activation XID." ::= {pktSwchSnaPUX25QllcEntryS 7}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.164.8.11.8.1.1 | pktSwchSnaPUX25QllcNumberS | 0 | 0 | This parameter defines an identifier associated with the PU Entry X25\QLLC side, which is unique within the SPS |
1.3.6.1.4.1.164.8.11.8.1.2 | pktSwchSnaPUX25QllcSideS | 0 | 0 | Is there side A or B of the PU connection |
1.3.6.1.4.1.164.8.11.8.1.3 | pktSwchSnaPUX25QllcIdBlkS | 0 | 0 | Part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The Idblk is required for secondary PU with Local… |
1.3.6.1.4.1.164.8.11.8.1.4 | pktSwchSnaPUX25QllcIdNumS | 0 | 0 | Second part of the IBM device ID (the full ID is defined by the IDBLK and the IDNUM). The Idnum is required for secondary PU wit… |
1.3.6.1.4.1.164.8.11.8.1.5 | pktSwchSnaPUX25QllcXIDInitS | 0 | 0 | This parameter is not applicable for PU with Local XID handling. Legal values: 1 - Do not initiate an XID message. 2 - Initiate an… |
1.3.6.1.4.1.164.8.11.8.1.6 | pktSwchSnaPUX25QllcMaxPiuSizeS | 0 | 0 | Maximum Path Information Size |
1.3.6.1.4.1.164.8.11.8.1.8 | pktSwchSnaPUX25QllcInPasswordS | 0 | 0 | A field matched with the call user data in call request packets for purposes of security and correlation. |
1.3.6.1.4.1.164.8.11.8.1.9 | pktSwchSnaPUX25QllcSubAddressS | 0 | 0 | The X.25 Sub-address associated with the PU Entry for routing incoming call indications. Range: 0-99. |
1.3.6.1.4.1.164.8.11.8.1.10 | pktSwchSnaPUX25QllcAutoCallS | 0 | 0 | This parameter indicates whether the SPS automatically initiates an X.25 call request or not. |
1.3.6.1.4.1.164.8.11.8.1.11 | pktSwchSnaPUX25QllcCalledAddressS | 0 | 0 | The destination x.25 DTE address to which the SPS calls. Used with AutoCall only. |
1.3.6.1.4.1.164.8.11.8.1.12 | pktSwchSnaPUX25QllcCallUserDataFacilitiesS | 0 | 0 | The X.25 facilities and Call User Data which the SPS uses on outgoing calls. AutoCall only. Up to 60 Hexa-Decimal digits. Each pai… |
1.3.6.1.4.1.164.8.11.8.1.13 | pktSwchSnaPUX25QllcEntryStatusS | 0 | 0 | The status of this PU Qllc table entry. In order to save this entry, set status to valid. An underCreation value is set by the Ag… |