Defines the contents of each line in the Profile Table.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
Defines the contents of each line in the Profile Table.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications
Module: RAD-MIB (rad-mib.mib)
Type: ENTRY
Access: not-accessible
Syntax: PktSwchProfileAEntry
Automatically extracted from www.mibdepot.com
pktSwchProfileAEntry OBJECT-TYPE SYNTAX PktSwchProfileAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the contents of each line in the Profile Table." INDEX { pktSwchProfileNumberA } ::= { pktSwchProfileATable 1 }
pktSwchProfileAEntry OBJECT-TYPE SYNTAX PktSwchProfileAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the contents of each line in the Profile Table." INDEX { pktSwchProfileNumberA } ::= { pktSwchProfileATable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.8.2.1.2.1.1 | pktSwchProfileNumberA | 0 | 0 | The number by which a profile is identified. This is also used as the index for the profile table. The maximum profile number i… |
| 1.3.6.1.4.1.164.8.2.1.2.1.2 | pktSwchProfileRecallCharA | 0 | 0 | The character specified by this entry is used to escape from the data transfer mode and enter the PAD command mode. The integer… |
| 1.3.6.1.4.1.164.8.2.1.2.1.3 | pktSwchProfileEchoA | 0 | 0 | This determines if an echo of the input characters is retured to the DTE. The options are either 'echo enabled' or 'no echo'. |
| 1.3.6.1.4.1.164.8.2.1.2.1.4 | pktSwchProfileDataForwCharA | 0 | 0 | The value is a sum of values (powers of two), where each value in the sum represents a character (or characters) that is (are) u… |
| 1.3.6.1.4.1.164.8.2.1.2.1.5 | pktSwchProfileIdleTimerA | 0 | 0 | Packets will be forwarded when the idle timer expires. The idle time interval is specified as a multiple of 50 milliseconds. T… |
| 1.3.6.1.4.1.164.8.2.1.2.1.6 | pktSwchProfileDevFlowContA | 0 | 0 | This parameter determines whether or not the PAD uses software flow control for the attached device. The options are either (1)… |
| 1.3.6.1.4.1.164.8.2.1.2.1.7 | pktSwchProfileServSigA | 0 | 0 | This parameter is used to instruct the PAD whether to transfer PAD service signals and the PAD prompt to the local DTE in standa… |
| 1.3.6.1.4.1.164.8.2.1.2.1.8 | pktSwchProfileBreakA | 0 | 0 | The value is a sum of values (powers of two), where each value in the sum represents a PAD operation on receipt of the break sig… |
| 1.3.6.1.4.1.164.8.2.1.2.1.9 | pktSwchProfileDiscOutA | 0 | 0 | This parameter instructs the PAD whether to forward the user sequences included in data packets to the local DTE or discard them… |
| 1.3.6.1.4.1.164.8.2.1.2.1.10 | pktSwchProfileCRPaddingA | 0 | 0 | This parameter specifies the number of padding characters to be added after a carriage return character is transmitted to the lo… |
| 1.3.6.1.4.1.164.8.2.1.2.1.11 | pktSwchProfileLineFoldA | 0 | 0 | This parameter specifies the maximum number of characters to be inserted before the format effector. If the value is zero, ther… |
| 1.3.6.1.4.1.164.8.2.1.2.1.12 | pktSwchProfileSpeedA | 0 | 0 | This parameter determines the rate of data transmission to and from the DTE. |
| 1.3.6.1.4.1.164.8.2.1.2.1.13 | pktSwchProfilePadFlowContA | 0 | 0 | This determines whether or not the terminal can exercise flow control over the PAD. The options are either 'device can exercise … |
| 1.3.6.1.4.1.164.8.2.1.2.1.14 | pktSwchProfileLineFeedInsertA | 0 | 0 | This parameter indicates when there is a line feed insertion after CR. The options are (1) Insert line feed after transmission … |
| 1.3.6.1.4.1.164.8.2.1.2.1.15 | pktSwchProfileLineFeedPadA | 0 | 0 | This parameter specifies the number of padding characters to be added after a line feed. |
| 1.3.6.1.4.1.164.8.2.1.2.1.16 | pktSwchProfileEditingA | 0 | 0 | This parameter specifies the editing capabilities available in the data transfer mode. Editing is always possible when the PAD i… |
| 1.3.6.1.4.1.164.8.2.1.2.1.17 | pktSwchProfileCharDelA | 0 | 0 | This parameter specifies the character delete, which is one character from IA5. The default selection is 127 (character DEL). |
| 1.3.6.1.4.1.164.8.2.1.2.1.18 | pktSwchProfileLineDelA | 0 | 0 | This parameter specifies the line delete, which is one character from IA5. The default selection is 24 (character CAN). |
| 1.3.6.1.4.1.164.8.2.1.2.1.19 | pktSwchProfileLineDispA | 0 | 0 | This entry specifies the line display character, which is one character from IA5. The default selection is 18 (character DC2). |
| 1.3.6.1.4.1.164.8.2.1.2.1.20 | pktSwchProfileEditServSigA | 0 | 0 | This entry specifies the editing PAD service signals. The integer values have the following meanings: (0) No edit… |
| 1.3.6.1.4.1.164.8.2.1.2.1.21 | pktSwchProfileEchomaskA | 0 | 0 | The value is a sum of values (powers of two), where each value in the sum represents a character (or characters) that is (are) i… |
| 1.3.6.1.4.1.164.8.2.1.2.1.22 | pktSwchProfileParTreatA | 0 | 0 | This entry controls the generation of parity bits in the data sent to the local DTE and the checking of the parity bit when gene… |
| 1.3.6.1.4.1.164.8.2.1.2.1.23 | pktSwchProfilePageWaitA | 0 | 0 | This entry specifies the number of line feed characters counted by the PAD before the page wait condition is entered. If the va… |
| 1.3.6.1.4.1.164.8.2.1.2.1.24 | pktSwchProfileBitsPerCharA | 0 | 0 | The number of data bits per character supported by the PAD. |
| 1.3.6.1.4.1.164.8.2.1.2.1.25 | pktSwchProfileDvParityA | 0 | 0 | This entry selects the type of parity to be checked and or generated by the PAD when radSPSProfileParTreat is a value other than… |
| 1.3.6.1.4.1.164.8.2.1.2.1.26 | pktSwchProfileStopBitsA | 0 | 0 | This entry indicates the number of stop bits per character supported by the PAD. The options are either (1) one stop bit, (2) tw… |
| 1.3.6.1.4.1.164.8.2.1.2.1.27 | pktSwchProfileSpecFlowA | 0 | 0 | This entry is used to define additional flow control possiblilites. The options are either (1) Flow control by means fo the ter… |
| 1.3.6.1.4.1.164.8.2.1.2.1.28 | pktSwchProfileCountFwdA | 0 | 0 | This entry can be used to instruct the PAD to complete the assembly of a packet and to forward it after the specifed number of c… |
| 1.3.6.1.4.1.164.8.2.1.2.1.29 | pktSwchProfileEscDelayA | 0 | 0 | This entry can be used to instruct the PAD whether to delay the forwarding of a data packet when an escape character is detected… |
| 1.3.6.1.4.1.164.8.2.1.2.1.30 | pktSwchProfileCharBreakA | 0 | 0 | This entry specifies the decimal value of the character that will be interpreted as an additional break signal by the PAD. A va… |
| 1.3.6.1.4.1.164.8.2.1.2.1.31 | pktSwchProfileCharSuppressA | 0 | 0 | This entry specifies the decimal value of the character that will toggle echo suppression in the PAD. A value of zero indicates… |
| 1.3.6.1.4.1.164.8.2.1.2.1.32 | pktSwchProfileCharSubsA | 0 | 0 | This entry specifies the decimal value of the character that will be echoed instead of the character received from the user's DT… |
| 1.3.6.1.4.1.164.8.2.1.2.1.33 | pktSwchProfileFormFeedPadA | 0 | 0 | This entry specifies the number of padding (NUL) characters that will be automatically sent after the form feed character. |
| 1.3.6.1.4.1.164.8.2.1.2.1.34 | pktSwchProfileInactivityA | 0 | 0 | This entry specifies the number of minutes after which the PAD will forward the accumulated data and clear the call. A zero val… |
| 1.3.6.1.4.1.164.8.2.1.2.1.35 | pktSwchProfileOptionsA | 0 | 0 | This entry defines several options to control the profile. The value is a sum of values (powers of two), where each value in th… |
| 1.3.6.1.4.1.164.8.2.1.2.1.36 | pktSwchProfileClrTimerA | 0 | 0 | This entry specifies the number of minutes after which a call is cleared. If the parameter value is 0, there is no disconnection… |
| 1.3.6.1.4.1.164.8.2.1.2.1.37 | pktSwchProfileSubAddInCUDA | 0 | 0 | This entry defines the number of digits for the subaddress in CUD. |