This parameter instructs the PAD whether to forward the user sequences included in
data packets to the local DTE or discard them. The options are (1) discard output or
(2) normal data delivery. If the value of radSPSProfileBreak is 21, the value of
pktSwchProfileDiscOut is automatically set to (1) when a break signal is received.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
This parameter instructs the PAD whether to forward the user sequences included in
data packets to the local DTE or discard them. The options are (1) discard output or
(2) normal data delivery. If the value of radSPSProfileBreak is 21, the value of
pktSwchProfileDiscOut is automatically set to (1) when a break signal is received.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications
Module: RAD-MIB (rad-mib.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
pktSwchProfileDiscOutA OBJECT-TYPE SYNTAX INTEGER { discOut(1), normal(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter instructs the PAD whether to forward the user sequences included in data packets to the local DTE or discard them. The options are (1) discard output or (2) normal data delivery. If the value of radSPSProfileBreak is 21, the value of pktSwchProfileDiscOut is automatically set to (1) when a break signal is received." ::= { pktSwchProfileAEntry 9 }
pktSwchProfileDiscOutA OBJECT-TYPE SYNTAX INTEGER { discOut(1), normal(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter instructs the PAD whether to forward the user sequences included in data packets to the local DTE or discard them. The options are (1) discard output or (2) normal data delivery. If the value of radSPSProfileBreak is 21, the value of pktSwchProfileDiscOut is automatically set to (1) when a break signal is received." ::= { pktSwchProfileAEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.8.2.1.2.1.1 | pktSwchProfileNumberA | 0 | 0 | The number by which a profile is identified. This is also used as the index for the profile table. The maximum profile number i… |
| 1.3.6.1.4.1.164.8.2.1.2.1.2 | pktSwchProfileRecallCharA | 0 | 0 | The character specified by this entry is used to escape from the data transfer mode and enter the PAD command mode. The integer… |
| 1.3.6.1.4.1.164.8.2.1.2.1.3 | pktSwchProfileEchoA | 0 | 0 | This determines if an echo of the input characters is retured to the DTE. The options are either 'echo enabled' or 'no echo'. |
| 1.3.6.1.4.1.164.8.2.1.2.1.4 | pktSwchProfileDataForwCharA | 0 | 0 | The value is a sum of values (powers of two), where each value in the sum represents a character (or characters) that is (are) u… |
| 1.3.6.1.4.1.164.8.2.1.2.1.5 | pktSwchProfileIdleTimerA | 0 | 0 | Packets will be forwarded when the idle timer expires. The idle time interval is specified as a multiple of 50 milliseconds. T… |
| 1.3.6.1.4.1.164.8.2.1.2.1.6 | pktSwchProfileDevFlowContA | 0 | 0 | This parameter determines whether or not the PAD uses software flow control for the attached device. The options are either (1)… |
| 1.3.6.1.4.1.164.8.2.1.2.1.7 | pktSwchProfileServSigA | 0 | 0 | This parameter is used to instruct the PAD whether to transfer PAD service signals and the PAD prompt to the local DTE in standa… |
| 1.3.6.1.4.1.164.8.2.1.2.1.8 | pktSwchProfileBreakA | 0 | 0 | The value is a sum of values (powers of two), where each value in the sum represents a PAD operation on receipt of the break sig… |
| 1.3.6.1.4.1.164.8.2.1.2.1.10 | pktSwchProfileCRPaddingA | 0 | 0 | This parameter specifies the number of padding characters to be added after a carriage return character is transmitted to the lo… |
| 1.3.6.1.4.1.164.8.2.1.2.1.11 | pktSwchProfileLineFoldA | 0 | 0 | This parameter specifies the maximum number of characters to be inserted before the format effector. If the value is zero, ther… |
| 1.3.6.1.4.1.164.8.2.1.2.1.12 | pktSwchProfileSpeedA | 0 | 0 | This parameter determines the rate of data transmission to and from the DTE. |
| 1.3.6.1.4.1.164.8.2.1.2.1.13 | pktSwchProfilePadFlowContA | 0 | 0 | This determines whether or not the terminal can exercise flow control over the PAD. The options are either 'device can exercise … |
| 1.3.6.1.4.1.164.8.2.1.2.1.14 | pktSwchProfileLineFeedInsertA | 0 | 0 | This parameter indicates when there is a line feed insertion after CR. The options are (1) Insert line feed after transmission … |
| 1.3.6.1.4.1.164.8.2.1.2.1.15 | pktSwchProfileLineFeedPadA | 0 | 0 | This parameter specifies the number of padding characters to be added after a line feed. |
| 1.3.6.1.4.1.164.8.2.1.2.1.16 | pktSwchProfileEditingA | 0 | 0 | This parameter specifies the editing capabilities available in the data transfer mode. Editing is always possible when the PAD i… |
| 1.3.6.1.4.1.164.8.2.1.2.1.17 | pktSwchProfileCharDelA | 0 | 0 | This parameter specifies the character delete, which is one character from IA5. The default selection is 127 (character DEL). |
| 1.3.6.1.4.1.164.8.2.1.2.1.18 | pktSwchProfileLineDelA | 0 | 0 | This parameter specifies the line delete, which is one character from IA5. The default selection is 24 (character CAN). |
| 1.3.6.1.4.1.164.8.2.1.2.1.19 | pktSwchProfileLineDispA | 0 | 0 | This entry specifies the line display character, which is one character from IA5. The default selection is 18 (character DC2). |
| 1.3.6.1.4.1.164.8.2.1.2.1.20 | pktSwchProfileEditServSigA | 0 | 0 | This entry specifies the editing PAD service signals. The integer values have the following meanings: (0) No edit… |
| 1.3.6.1.4.1.164.8.2.1.2.1.21 | pktSwchProfileEchomaskA | 0 | 0 | The value is a sum of values (powers of two), where each value in the sum represents a character (or characters) that is (are) i… |
| 1.3.6.1.4.1.164.8.2.1.2.1.22 | pktSwchProfileParTreatA | 0 | 0 | This entry controls the generation of parity bits in the data sent to the local DTE and the checking of the parity bit when gene… |
| 1.3.6.1.4.1.164.8.2.1.2.1.23 | pktSwchProfilePageWaitA | 0 | 0 | This entry specifies the number of line feed characters counted by the PAD before the page wait condition is entered. If the va… |
| 1.3.6.1.4.1.164.8.2.1.2.1.24 | pktSwchProfileBitsPerCharA | 0 | 0 | The number of data bits per character supported by the PAD. |
| 1.3.6.1.4.1.164.8.2.1.2.1.25 | pktSwchProfileDvParityA | 0 | 0 | This entry selects the type of parity to be checked and or generated by the PAD when radSPSProfileParTreat is a value other than… |
| 1.3.6.1.4.1.164.8.2.1.2.1.26 | pktSwchProfileStopBitsA | 0 | 0 | This entry indicates the number of stop bits per character supported by the PAD. The options are either (1) one stop bit, (2) tw… |
| 1.3.6.1.4.1.164.8.2.1.2.1.27 | pktSwchProfileSpecFlowA | 0 | 0 | This entry is used to define additional flow control possiblilites. The options are either (1) Flow control by means fo the ter… |
| 1.3.6.1.4.1.164.8.2.1.2.1.28 | pktSwchProfileCountFwdA | 0 | 0 | This entry can be used to instruct the PAD to complete the assembly of a packet and to forward it after the specifed number of c… |
| 1.3.6.1.4.1.164.8.2.1.2.1.29 | pktSwchProfileEscDelayA | 0 | 0 | This entry can be used to instruct the PAD whether to delay the forwarding of a data packet when an escape character is detected… |
| 1.3.6.1.4.1.164.8.2.1.2.1.30 | pktSwchProfileCharBreakA | 0 | 0 | This entry specifies the decimal value of the character that will be interpreted as an additional break signal by the PAD. A va… |
| 1.3.6.1.4.1.164.8.2.1.2.1.31 | pktSwchProfileCharSuppressA | 0 | 0 | This entry specifies the decimal value of the character that will toggle echo suppression in the PAD. A value of zero indicates… |
| 1.3.6.1.4.1.164.8.2.1.2.1.32 | pktSwchProfileCharSubsA | 0 | 0 | This entry specifies the decimal value of the character that will be echoed instead of the character received from the user's DT… |
| 1.3.6.1.4.1.164.8.2.1.2.1.33 | pktSwchProfileFormFeedPadA | 0 | 0 | This entry specifies the number of padding (NUL) characters that will be automatically sent after the form feed character. |
| 1.3.6.1.4.1.164.8.2.1.2.1.34 | pktSwchProfileInactivityA | 0 | 0 | This entry specifies the number of minutes after which the PAD will forward the accumulated data and clear the call. A zero val… |
| 1.3.6.1.4.1.164.8.2.1.2.1.35 | pktSwchProfileOptionsA | 0 | 0 | This entry defines several options to control the profile. The value is a sum of values (powers of two), where each value in th… |
| 1.3.6.1.4.1.164.8.2.1.2.1.36 | pktSwchProfileClrTimerA | 0 | 0 | This entry specifies the number of minutes after which a call is cleared. If the parameter value is 0, there is no disconnection… |
| 1.3.6.1.4.1.164.8.2.1.2.1.37 | pktSwchProfileSubAddInCUDA | 0 | 0 | This entry defines the number of digits for the subaddress in CUD. |