The protocol to be used on this link.
Note for PPP:
PPP protocol is allowed to be applied on Sync Links (1-3)
as well as Async channels (1-24).
In order to eliminate ambiguity in the IP destination where
a destination of P1 can be used for example for async channel 1
and Sync Link 1, it was decided NOT TO ALLOW configuring PPP on both
Sync Link no. 1 and async channel 1. Same for Link 2 and
Link 3.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
The protocol to be used on this link.
Note for PPP:
PPP protocol is allowed to be applied on Sync Links (1-3)
as well as Async channels (1-24).
In order to eliminate ambiguity in the IP destination where
a destination of P1 can be used for example for async channel 1
and Sync Link 1, it was decided NOT TO ALLOW configuring PPP on both
Sync Link no. 1 and async channel 1. Same for Link 2 and
Link 3.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications
Module: RAD-MIB (rad-mib.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
pktSwchPhyInterfaceProtocolS OBJECT-TYPE SYNTAX INTEGER { x25(1), frameRelay(2), hdlc(3), sdlc(4), async(5), stm4(6), stm8(7), stm16(8), stm24(9), mpe(10), bscHpad(11), bscTpad(12), slip(13), ethernet(14), ppp(15) } MAX-ACCESS read-write STATUS current DESCRIPTION "The protocol to be used on this link. Note for PPP: PPP protocol is allowed to be applied on Sync Links (1-3) as well as Async channels (1-24). In order to eliminate ambiguity in the IP destination where a destination of P1 can be used for example for async channel 1 and Sync Link 1, it was decided NOT TO ALLOW configuring PPP on both Sync Link no. 1 and async channel 1. Same for Link 2 and Link 3." ::= { pktSwchPhyInterfaceEntry 2 }
pktSwchPhyInterfaceProtocolS OBJECT-TYPE SYNTAX INTEGER { x25(1), frameRelay(2), hdlc(3), sdlc(4), async(5), stm4(6), stm8(7), stm16(8), stm24(9), mpe(10), bscHpad(11), bscTpad(12), slip(13), ethernet(14), ppp(15) } MAX-ACCESS read-write STATUS current DESCRIPTION "The protocol to be used on this link. Note for PPP: PPP protocol is allowed to be applied on Sync Links (1-3) as well as Async channels (1-24). In order to eliminate ambiguity in the IP destination where a destination of P1 can be used for example for async channel 1 and Sync Link 1, it was decided NOT TO ALLOW configuring PPP on both Sync Link no. 1 and async channel 1. Same for Link 2 and Link 3." ::= { pktSwchPhyInterfaceEntry 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.164.8.3.1.1 | pktSwchPhyInterfaceIfIndex | 0 | 0 | The ifIndex identified with this link. |
1.3.6.1.4.1.164.8.3.1.3 | pktSwchPhyInterfaceProtocolA | 0 | 0 | The protocol currently used on this link. |
1.3.6.1.4.1.164.8.3.1.4 | pktSwchPhyInterfaceCopyTo | 0 | 0 | The destination interface number, to which the Copy is performed. |
1.3.6.1.4.1.164.8.3.1.5 | pktSwchPhyInterfaceChanged | 0 | 0 | Indicates if the current running protocol is different than the defined protocol |
1.3.6.1.4.1.164.8.3.1.6 | pktSwchPhyInterfaceRxBuffInPool | 0 | 0 | The free data buffers in the Rx pool per interface |
1.3.6.1.4.1.164.8.3.1.7 | pktSwchPhyInterfaceConnector | 0 | 0 | The connector type of the interface |
1.3.6.1.4.1.164.8.3.1.8 | pktSwchPhyInterfaceNeighborIp | 0 | 0 | The Ip address of the device on the other side of the link. |
1.3.6.1.4.1.164.8.3.1.9 | pktSwchPhyInterfaceProtocolStatus | 0 | 0 | The status of the Interface Protocol row in the Table. |
1.3.6.1.4.1.164.8.3.1.10 | pktSwchPhyInterfaceTestCmd | 0 | 0 | START/STOP a test on the current interface. The available tests are: v54Local - Local Analog Loopback (AL), L3 according to IT… |
1.3.6.1.4.1.164.8.3.1.11 | pktSwchPhyInterfaceTestTransmittedFrames | 0 | 0 | No. of frames which were transmitted from this interface during the TEST. |
1.3.6.1.4.1.164.8.3.1.12 | pktSwchPhyInterfaceTestReceivedFrames | 0 | 0 | No. of frames which were received on this interface during the TEST. |
1.3.6.1.4.1.164.8.3.1.13 | pktSwchPhyInterfaceTestLostFrames | 0 | 0 | Percentage of the frames which were lost during the TEST. |