The free data buffers in the Rx pool per interface
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
The free data buffers in the Rx pool per interface
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications
Module: RAD-MIB (rad-mib.mib)
Type: TABULAR
Access: read-only
Syntax: Integer32
Automatically extracted from www.mibdepot.com
pktSwchPhyInterfaceRxBuffInPool OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The free data buffers in the Rx pool per interface" ::= { pktSwchPhyInterfaceEntry 6 }
pktSwchPhyInterfaceRxBuffInPool OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The free data buffers in the Rx pool per interface" ::= { pktSwchPhyInterfaceEntry 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.164.8.3.1.1 | pktSwchPhyInterfaceIfIndex | 0 | 0 | The ifIndex identified with this link. |
1.3.6.1.4.1.164.8.3.1.2 | pktSwchPhyInterfaceProtocolS | 0 | 0 | The protocol to be used on this link. Note for PPP: PPP protocol is allowed to be applied on Sync Links (1-3) as well as Async cha… |
1.3.6.1.4.1.164.8.3.1.3 | pktSwchPhyInterfaceProtocolA | 0 | 0 | The protocol currently used on this link. |
1.3.6.1.4.1.164.8.3.1.4 | pktSwchPhyInterfaceCopyTo | 0 | 0 | The destination interface number, to which the Copy is performed. |
1.3.6.1.4.1.164.8.3.1.5 | pktSwchPhyInterfaceChanged | 0 | 0 | Indicates if the current running protocol is different than the defined protocol |
1.3.6.1.4.1.164.8.3.1.7 | pktSwchPhyInterfaceConnector | 0 | 0 | The connector type of the interface |
1.3.6.1.4.1.164.8.3.1.8 | pktSwchPhyInterfaceNeighborIp | 0 | 0 | The Ip address of the device on the other side of the link. |
1.3.6.1.4.1.164.8.3.1.9 | pktSwchPhyInterfaceProtocolStatus | 0 | 0 | The status of the Interface Protocol row in the Table. |
1.3.6.1.4.1.164.8.3.1.10 | pktSwchPhyInterfaceTestCmd | 0 | 0 | START/STOP a test on the current interface. The available tests are: v54Local - Local Analog Loopback (AL), L3 according to IT… |
1.3.6.1.4.1.164.8.3.1.11 | pktSwchPhyInterfaceTestTransmittedFrames | 0 | 0 | No. of frames which were transmitted from this interface during the TEST. |
1.3.6.1.4.1.164.8.3.1.12 | pktSwchPhyInterfaceTestReceivedFrames | 0 | 0 | No. of frames which were received on this interface during the TEST. |
1.3.6.1.4.1.164.8.3.1.13 | pktSwchPhyInterfaceTestLostFrames | 0 | 0 | Percentage of the frames which were lost during the TEST. |