The link number with which this entry is associated. This value
corresponds to pktSwchPhyInterfaceNumber. There is an entry for
each link for which the pktSwchPhyInterfaceProtocol is HDLC.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
The link number with which this entry is associated. This value
corresponds to pktSwchPhyInterfaceNumber. There is an entry for
each link for which the pktSwchPhyInterfaceProtocol is HDLC.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications
Module: RAD-MIB (rad-mib.mib)
Type: TABULAR
Access: read-only
Syntax: Integer32
Automatically extracted from www.mibdepot.com
pktSwchHdlcLinkNumberS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The link number with which this entry is associated. This value corresponds to pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwchPhyInterfaceProtocol is HDLC." ::= { pktSwchHdlcSEntry 1 }
pktSwchHdlcLinkNumberS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The link number with which this entry is associated. This value corresponds to pktSwchPhyInterfaceNumber. There is an entry for each link for which the pktSwchPhyInterfaceProtocol is HDLC." ::= { pktSwchHdlcSEntry 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.164.8.5.1.1.2 | pktSwchHdlcDestAddrS | 0 | 0 | The destination address. It defines the X.25 address on the remote device. |
1.3.6.1.4.1.164.8.5.1.1.3 | pktSwchHdlcDestSubAddrS | 0 | 0 | The destination subaddress. It defines the synchronous link subaddress on the remote device. |
1.3.6.1.4.1.164.8.5.1.1.4 | pktSwchHdlcRedialTimeoutS | 0 | 0 | The time interval in seconds between two consecutive connect operations retries. |
1.3.6.1.4.1.164.8.5.1.1.5 | pktSwchHdlcRedialRetriesS | 0 | 0 | This defines how many times the call operation is repeated if the call request has failed. |
1.3.6.1.4.1.164.8.5.1.1.6 | pktSwchHdlcInactivityS | 0 | 0 | The amount of time in minutes of inactivity that will cause the session to disconnect. |
1.3.6.1.4.1.164.8.5.1.1.7 | pktSwchHdlcX25FacilitiesS | 0 | 0 | This specifies the X.25 facilities. The value is a sum of values (powers of two), where each value in the sum represents an opt… |
1.3.6.1.4.1.164.8.5.1.1.8 | pktSwchHdlcLocalSubaddr1S | 0 | 0 | The first local subaddress. |
1.3.6.1.4.1.164.8.5.1.1.9 | pktSwchHdlcLocalSubaddr2S | 0 | 0 | The secondary local subaddress. |
1.3.6.1.4.1.164.8.5.1.1.10 | pktSwchHdlcDestDlciS | 0 | 0 | The local DLCI which is used for HDLC encapsulation over Frame Relay. Range: 16...991 |
1.3.6.1.4.1.164.8.5.1.1.11 | pktSwchHdlcDestPortS | 0 | 0 | The local port that is used for HDLC encapsulation over Frame Relay. Range: 1...12 |
1.3.6.1.4.1.164.8.5.1.1.12 | pktSwchHdlcProtocolS | 0 | 0 | The HDLC protocol type. |
1.3.6.1.4.1.164.8.5.1.1.13 | pktSwchHdlcFlowContOptionsS | 0 | 0 | This specifies the type of flow control of the HDLC link. The value is a sum of values (powers of two), where each value in the… |
1.3.6.1.4.1.164.8.5.1.1.14 | pktSwchHdlcBufferFlowControlS | 0 | 0 | The number of buffers that will be allocated for the HDLC link. Default value is 10 |
1.3.6.1.4.1.164.8.5.1.1.15 | pktSwchHdlcInternalClockS | 0 | 0 | The baud rate of the internal clock. |
1.3.6.1.4.1.164.8.5.1.1.16 | pktSwchHdlcNrzModeS | 0 | 0 | The data encoding format. The value is a sum of values (powers of two), where each value in the sum represents an option. The valu… |